• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.261-269
• /
• 2016

This paper aims to propose a novel technology of network convergence to provide ultra high speed internet services over CATV networks, by which a CMC(cable modem concentrator) and CM(cable modem) of 1Gbps level are designed. This technology not only lowers the production cost in comparison to the existing bonding technology with DOCSIS specification but also enables the adjustment of data speed based on the channel bandwidth. According to the experiments, when convolutional code rate with 128QAM is changed to 1/2, 2/3, 3/4 and 7/8, the data recorded the maximum transmission speed of up to 299 Mbps at the zero error rate. As the convolutional code rates with 256QAM is increased, it showed 334Mbps at the error rate of $10^{-5}$. Based on the findings of this paper, if we secure the channel bandwidth of 200MHz and adjust the modulation order of QAM and the convolution code rate depending on the channel status, we can get the transmission speed of more than 1Gbps, which is much more competitive in its function and price than the existing technology based on DOCSIS.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.20-25
• /
• 2015

Purpose: This study was evaluated the shade of feldspathic porcelain with various concentration of silver ion. Materials and Methods: The control group was conventional feldspathic porcelain with no silver ion, the experimental groups were the feldpathic porcelain with 5%, 10%, 20%, 30% silver ion. The number of specimens on the each group was 5. Commission Internationale de I'Eclairage (CIE) $L^*a^*b^*$ parameters were recorded twice for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). One-way Anova was used for statistical analysis. Results: L value was similar. a value was increasing and b value was decreasing with silver ion statistically significantly. ${\Delta}E$ was increasing according to silver ion significantly. Conclusion: The shade of feldspahtic porcelain was influenced by silver ion. Ag ion under 10% concentration is acceptable clinically.

• PNF and Movement
• /
• v.16 no.2
• /
• pp.169-178
• /
• 2018

Purpose: This study aimed to investigate the effect of angular joint mobilization (AJM) on the shoulder pain, range of motion, and functional improvement in a patient with shoulder adhesive capsulitis. Methods: The patient diagnosed with right shoulder adhesive capsulitis by an orthopedic surgeon was a 60-year-old male, right hand/arm dominant, with a height of 175 cm and weight of 75 kg. The patient received 12 sessions of AJM once or twice per week for eight weeks. AJM was applied for 5 min each of flexion, abduction, external rotation, internal rotation, for a total of 20 min per session. The visual analog scale, the goniometer, and the Oxford shoulder score were used to measure pain, range of motion, and shoulder pain & disability index, respectively. Results: After all the treatments, the pain decreased from 6 to 2 points. The range of motion increased in flexion by $54.3^{\circ}$ from $125^{\circ}$ to $179.3^{\circ}$, abduction by $38^{\circ}$ from $140^{\circ}$ to $178^{\circ}$, external rotation by $54.4^{\circ}$ from $30.3^{\circ}$ to $84.7^{\circ}$, and internal rotation by $25^{\circ}$ from $45^{\circ}$ to $70^{\circ}$. The shoulder disability index decreased from 33 points to 17 points. Conclusion: This study found that AJM has a positive effect on the improvement of shoulder pain, range of motion, and function in a patient with shoulder adhesive capsulitis. Further studies on AJM are needed in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.655-661
• /
• 2006

Dielectric and piezoelectric properties of PMN-PZT ceramics with a high mechanical quality factor$(Q_m)$ and a low temperature sintering temperature were investigated as a function of PZN substitution in order to develop multilayer piezoelectric transformer for AC-DC converter. Multilayer piezoelectric transformers were subsequently manufactured using the PMN-PZN-PZT ceramic offering the optimal behavior and then the electrical performance were invetigated. At the sintering temperature of $940^{\circ}C$, density, electromechanical coupling factor$(k_p)$, mechanical qualify factor$(Q_m)$ and dielectric constant$(\varepsilon_r)$ of 8 mol% PZN substituted specimen were $7.73g/cm^3$, 0.524, 1573 and 1455, respectively. The PZN substitution caused a increase in the dielectric constant and the electromechnical coupling factor. The voltage step-up ratio of multilayer piezoelectric transformer showed the maximum value at near the resonant frequency of 76.55 kHz and increased according to the increase of load resistance. The multilayer piezoelectric transformer with the output impedance coincided with the load resistance showed the temperature increase of less than $20^{\circ}C$ at the output power of 10 W. Based on the results, the manufactured multilayer transformer using the low temperature sintered PMN-PZN-PZT ceramics can be stably driven for both step-up and down transformers.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.59-65
• /
• 1999

In this paper, we had studied the possibility of application as Cu thin films from (hfac)Cu(VTMOS) which is very stable. Cu thin films had been studied as a function of deposition temperature. Substrates used in the experiment were PVD TiN on Si wafer. Deposition conditions were as follow : deposition temperature $50^{\circ}C$. Cu thin films were analyzed by AES, four point probe, XRD and SEM. All of deposited films were very pure and some favoring of <111> planes perpendicular to the substrate surface were observed. Cu thin films had two distinct growth rates at various deposition temperature. One is the surface reaction limited region below $200^{\circ}C$, and the other is the mass transport limited region above $200^{\circ}C$. The resistivity of deposited Cu thin films under the optimum deposition condition is $2.5mu\Omega.cm$ Thus, properties of deposited Cu thin films using (hfac)Cu(VTMOS) didn't show difference with Cu thin films from other precursors.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.79-84
• /
• 2006

We studied the microstructure and magnetic property of the pulsed DC magnetron sputtered $Zn_{\0.8}Co_{0.2}O$ film as a function of substrate temperatures. The X-ray patterns of the $Zn_{\0.8}Co_{0.2}O$ film showed a strong (002) preferential orientation at $500^{\circ}C$. The films with a crystallite size of 23-35 nm were grown in the form of nano-sized structure and this tendency was remarkable with increasing substrate temperature. The UV-visible result showed that the $Zn_{\0.8}Co_{0.2}O$ film prepared above $300^{\circ}C$ has a high optical transmittance of over $80\%$ in the visible region. The absorption bands were observed due to sp-d interchange action by $Co^{2+}$ complex ion and dd transition in the region from 500 to 700nm. The resistivity of the film was below $10^{-1}\;\Omega-cm\;above\;300^{\circ}C$. The AGM analysis results for the all films showed the magnetic hysteresis curves of ferromagnetic nature. The low electrical resistivity and room temperature ferromagnetism of ZnCoO thin films 'deposited above $300^{\circ}C$ suggested the possibility for the application to Diluted Magnetic Semiconductors (DMSs).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.85-93
• /
• 2007

The purpose of this study was to evaluate the microleakage of root-end filling material filled in blood contaminated root-end cavity and self-etching adhesive placed over blood contaminated resected root apices without root-end preparation. Extracted, human maxillary incisors, canines and mandibular premolar were randomly divided into four groups of 15 teeth each. After canal preparation, resection of the apex and root-end preparation, MTA and IRM were filled in the root-end cavity (A and B group). After canal preparation and resection of the apex, Clearfil SE Bond and Prompt L-Pop were applied over the contaminated root-end surfaces (C and D group). The roots were then subjected to 15cm of water pressure to simulate periapical microleakage stress. Data were analyzed using one-way ANOVA. The results were as follows : 1. All groups showed a tendency of decreasing microleakage in process of time after 2weeks later except IRM group. 2. After 2 weeks and 1 month, MTA group showed less microleakage significantly than other groups(p<0.05). After 2 months, Prompt L-Pop group showed less microleakage significantly than other groups(p<0.05). 3. After 9 months, there were no significant differences among four groups(p>0.05). Thus it is considered that apical sealing using adhesives system without root-end preparation is good method in endodontic surgery.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.174-180
• /
• 2003

This study investigated the size selectivity of the round traps for greenling (Hexagrammos otakii) in the western sea of Korea. The selection curve for the greenling from the experiments on Oct. 2000 and Ar. 2001 was fitted by Kitahara's method to a polynomial equation and two parameter logistic selection curve. The selectio curve of the latter was more reasonable than that of the former. The equation of selectivity curve obtained using a logistic function with least square method was , s(R)=1/1+exp(-1.1169R+6.4565), where R=1/m, and 1 and m are total length and mesh size, respectively. The size selectivity curve showed that the current regulated mesh size(35mm) in case of the round trap was close to the L50 (37.0mm) of the selection curve for the biological minimum length (21.4cm) of the greenling.

• Biomolecules & Therapeutics
• /
• v.17 no.3
• /
• pp.241-248
• /
• 2009

The purpose of this study was to evaluate the effect of methylsulfonylmethane (MSM) on hair growth promotion of magnesium ascorbyl phosphate (MAP) for the treatment of alopecia. Aqueous solutions of MAP 7.5% with or without MSM 1%, 5% or 10% were prepared and applied onto the depilated back skin of the male mice once a day for 20 days. The degree of hair growth was evaluated by visual scoring using hair growth quantification scale (0-5, 0 being initial state and 5 being complete hair growth). In vitro transdermal penetration and intradermal retention studies of MAP were performed with Franz diffusion cell using hairless mice skin. Hair growth in the group treated with the aqueous solution containing MAP 7.5% and MSM 10% was comparable to or better than the result in the group treated with minoxidil 5% solution. Hair growth promotion of MAP was dose-dependently increased by the presence of MSM used in combination with MAP 7.5% solution. The in vitro transdermal penetration of the MAP was decreased in proportion to the concentration of MSM. However, intradermal retention of MAP was profoundly and dose-proportionally increased as a function of MSM concentration, reaching 802 ${\mu}g/cm^2$ in the presence of MSM 10% (200-fold increase). The effect of MSM on hair growth promotion of MAP was dose-proportional to the concentration of MSM due to the enhanced intradermal retention of MAP in the presence of MSM. Therefore, topical application of MAP together with MSM appears to be useful for the treatment of alopecia.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1181-1181
• /
• 2001

Robinson with ${coworkers}^{1}$ have introduced two-state outer-neighbor bonding model to explain the anomalies of water. The studies on the properties of water as a function of temperature and pressure revealed that, unlike other ideas, all $H_2O$ molecules in liquid are tetrabonded. On the average they are forming two different bonding types. One type is the regular tetrahedral water-water bonding similar to that found in the ordinary ice Ih, whereas the other is a more dense nonregular tetrahedral bonding similar to that appearing in the ice II. The transformation between these two bonding forms is evidenced by FT-NIR experiment. The FT-NIR measurements were done for liquid water in the temperature range from $20^{\circ}C$ up to $80^{\circ}C$ in a wide extent of frequencies: 12 000 - 4000 $cm^{-1}$ /. Temperature dependent variations in the volume fraction of these two structures are directly related to the spectral changes. The absorbance variations are explored by means of the two-dimensional correlation spectroscopy (2DCOS), principal component analysis (PCA), curve fitting and second derivatives. The presence of the isosbestic points in a range of the combination and overtone transitions indicates that the experimental spectra are a superposition of two temperature independent components. One component of diminishing intensity with temperature increase, is assigned to a stronger hydrogen bonds occurred in the Ih type, whereas the second component showing an opposite behavior, one can attribute to a weaker H-bonds characteristic for the II type. The understanding of the hydrogen bonding network in the liquid water is very important in interpretation of the interaction between water and protein chain. The two-state model of water surrounding the protein surface could advance an understanding of the hydration process.