Jae-Ik Cho;Da Yeon Kang;Hyeon Ji Kim;Seung-Jong Lee;Gun Wook Baeck
Korean Journal of Ichthyology
/
v.35
no.4
/
pp.347-353
/
2023
Zenopsis nebulosa were collected by bottom trawl net from 20 areas in the South Sea of Korea during 2021 (February, May, August, November). The range of total length was 10.1~50.2 cm and empty stomach rate was 45.8%. The most important prey of Z. nebulosa was Pisces, with Trichiurus japonicus, Trachurus japonicus and Benthosema pterotum. And the second important prey was Euphausiacea. Z. nebulosa showed dietary shift by size class. In the <20.0 cm size class, Trachurus japonicus was dominant prey item. In the 20.0~25.0 cm size class, Trichiurus japonicus was dominant prey item. In the ≥25.0 cm size class, B. pterotum was dominant prey item. Analysis of the mean weight of preys per stomach (mW/ST) increased with individual size.
This study has analyzed body size of adult women between 20~59 years old in 2010 conducted by Size Korea and the study method is as follow. (1) Distribution ratio of bust circumference per age and distribution ratio of differences of bust drops were analyzed. (2) Analysis of one-way design of experiment was carried out for 20 items of body sizes according to differences of bust drops with regard to age groups of 20 and 40 years old in consideration of tourists who are unspecified target and for the whole ages groups. (3) Comparison analysis of 20 items of body sizes per bust circumference and according to level of differences of bust drops was carried out and (4) t-test of the two groups based on the standard of 12.5 cm of the differences of bust drops was conducted and was analyzed. Tthe differences of bust drops below 10 cm were reduced according to ages. 12.5 cm was the most in the group of ages of 20s and under 7.5 cm was reduced as ages were higher. Body items according to the differences of bust drops per ages had meaningful differences between groups except (acromion height-axilla height), height and shoulder length for the group of ages of 20s and in the whole ages groups, there was meaningful difference between groups in all items except height and shoulder length. Comparisons according to the differences of bust drops per section of 5 cm of bust circumference showed meaningful differences between groups in general in items of BMI, bust point-bust point, neck circumference, bust circumference, underbust circumference, neck point to bust point and weight. As the result of comparing the two groups of the differences of bust drops based on the standard of 12.5 cm, all had meaningful differences except stature and shoulder length.
This study proposed a revision of standard sizing system for infant clothing to provide exact information for consumers and manufacturers. The size designation was set up by compensating the defect of existing system. Basic body measurement and reference body measurement were analysed according to size designation. The ages of the infants ranged from 0 to 36 month in accordance with safety standard of KC Self-Regularity Safety Confirmation. The results are as follows: Size designation for infant clothing was based on height that was basic body measurement. Chest girth, waist girth, head girth, arm length, foot length and weight were also analysed according to age of the month. It was proposed that height could be written alone and height with age of month did together for size designation. Size intervals of basic and reference body measurements were fixed as follows: size intervals are 5 cm in height, 2 cm in chest girth, 2 cm in waist girth, 1 cm in head girth, 2 cm in arm length, 0.5 cm in foot length and 2 kg in weight. The distributions of height and chest girth showed normal distributions. As height was taller, chest girth was also bigger. But the distribution of waist girth didn't show remarkable change with age of month. The distributions of arm length and weight showed remarkable difference with growth in 0~9 months, but the amount of growth variation got less in 12~18 months.
The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men's Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.
Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.
This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.
This study aims to suggest the patternmaking method of men's slim-fit four-panel jacket sloper in their 30's. The researcher collected four kinds of existing slopers and carried out appearance and movement evaluations twice. Then the researcher's sloper was developed by modifying and supplementing the existing sloper with high scores in the evaluations. The results are as follows: First, when comparing the existing slopers, ease on the chest varied from 13 cm to 17.8 cm. Actual measurements or formula method were used for the armhole depth, waist line, and hip line. It was one-third of armhole length for the sleeve cap height in most existing slopers. Second, the researcher's sloper had excellent scores in the appearance and movement evaluations (front neck depth, ease on the chest, front dropped length, ease on the sleeve cap, and the position that separate the two piece sleeves on the back). Third, the suggested sloper, has 13~14 cm for ease in the chest circumference and 2.5 cm for front dropped length. It sets to chest/4+2 cm for armhole depth, height/4+1 cm for waist line placement, and height/8 for hip length. The sleeve cap height is one-third of armhole length. These results will be useful when the industrial technical designers develop various jacket patterns.
This study attempted to undertake comparative analysis of woman's jacket pattern and details based on the Crinoline and Bustle style of the 19th century, comprehend the relation and differences between the two styles. And it also presented the resultant characteristics and attempted reproducing the original dress of the past for the development of modern woman's jacket design. Larger portion was occupied for the breast front width than the back width for both Crinoline and Bustle style, which indicated the remarkable difference between these styles and modern jackets in terms of pattern size. Circumferences also showed that both styles had larger size for the front region than for the back. Divided by two types of pattern shape. The Crinoline style has a waist line and flare. On the other hand, the Bustle style does not have a waist line and has pleats. These two styles shows distinct differences of patterns even if they seem similar. It was essential to undertake the designing of models by giving a consideration to the characteristics of patterns of the two styles. With respect to how to sketch the study models which will be applied for the reproduction to modern body sizes were as follows: the front bust circumference; B/4 +1+1 cm, the back bust circumference; B/4 +1-1 cm, front waist circumference; W/4 +1+1 cm, back waist circumference; W/4 +1-1 cm, the height of sleeve crown; AH/3, armhole line; B/4, the back width /2; 17.5 cm, the breast front width /2; 16.5cm. And for the rest parts, sizes reflecting the characteristics of the patterns of two styles have been applied.
Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.