• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.699-714
• /
• 2006

The purpose of this study is to suggest a methodology to grasp the design method of industrial slacks pattern for women in their early twenties. The result of this study is as follows: 1. The result of the questionnaire showed that the design of rear center gradient was most important and the rear center gradient was designed by shifting waist line and hip line to a suitable degree.; below the waist by 4cm, the girth was measured and the ease of $0{\sim}1cm$ was applied to it, and the ease of hip girth was $3.2{\pm}1.2cm$, and rear center gradient was $2.2{\pm}1cm$, and front crotch extension was $2.8{\pm}0.5cm$, while rear crotch extension was $6.3{\pm}0.5cm$. 2. By comparing rear center gradient which was selected as an important design item with total crotch length and hip girth, I selected industrial pattern and educational pattern, and evaluated them on human bodies. In the result of ANOVA analysis, there were meaningful differences in 8 items: the ease of front waist girth, the ease of front abdomen, the ease of front hip girth, rumples in the side lines, the location of rear waist line, etc. 3. The design method of slacks pattern suitable for women in their early twenties was suggested as follows: the location of waist girth is below waist by $2.5{\sim}3cm$; the ease of waist girth is $0{\sim}1cm$; the ease of hip girth is $2{\sim}3cm$; total crotch length is body size - 5cm; rear center gradient is $2.5{\pm}0.5cm$; rear crotch extension is $7{\pm}0.5cm$; front crotch extension is 3cm.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.2
• /
• pp.139-149
• /
• 1999

Thermal sprayed Ni-Cr alloy coating on the carbon steel was carried out erosion-corrosion test and electrochemical corrosion test in the marine environment. The erosion-corrosion behavior and electrochemical corrosion characteristics of substrate(SS400) and thermal sprayed Ni-Cr coating was investigated. The erosion-corrosion control efficiency of Ni-Cr coating to substrate was also estimated quantitatively. The main results obtained are as follows : 1) The weight loss rate of Ni-Cr coating layer by the erosion-corrosion compared with substrate was smaller. With the lapse of time, the weight loss rate of substrate was linearly increased in $25{\Omega}{\cdot}cm$ solution, but that of Ni-Cr coating became stable. 2) The corrosion potential of substrate became less noble than that of Ni-Cr coating layer, and the corrosion current density of Ni-Cr coating became lower than that of substrate. 3) The control efficiency of erosion-corrosion of Ni-Cr coating compared to substrate became more dull than that of corrosion in $25{\Omega}{\cdot}cm$ and $5000{\Omega}{\cdot}cm$ solution.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.1098-1106
• /
• 2016

To study the influence of light intensity on blind-side hypermelanosis of starry flounder, Platichthys stellatus, we compared growth, glucose, cortisol, ratio of malpigmented blind-side area, ambicolored fish ratio and expression of mch mRNA for 60 days in 0 lux(darkness) and 20 lux(low light density). The test was done in duplicate at 50 fish/tank with the selected ordinary juvenile flounder. The rearing was performed in FRP aquarium tanks ($H100cm{\times}L100cm{\times}W100cm$). Growth was higher in the 0 lux. The ratio of malpigmented blind-side area and ambicolored fish ratio were significantly higher at the 0 lux than at the 20 lux. The result suggests that 20 lux could inhibit the hypermelanosis. The expression level of MCH 1, 2 mRNA was significantly lower in 0 lux, indicating that MCH 1, 2 and light intensity are related to blind-side hypermelanosis of starry flounder.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.1
• /
• pp.84-90
• /
• 2007

This paper was studied on the electrochemical corrosion characteristics of weld zone for refrigerating and heating systems pipe. Austenitic stainless steel is widely applied to various fields of industry, because it is good to corrosion resistance and mechanical properties. But STS 304 is reliable to sensitization by heat cycle on welding. Therefore, in this study, electrochemical polarization test of STS 304 steel pipe manufactured by arc welding in tap water was carried out. And then polarization resistance behavior, uniform and local corrosion behaviors of base metal(BM), weld metal(WM) and heat affected zone(HAZ) for STS 304 pipe were investigated. The corrosion current density of STS 304 steel pipe is high in order of BM(153nA/cm2) < WM(614nA/cm2) < HAZ ($1.675{\mu}A/cm2$). The pitting potential of HAZ(238mV/SCE) for STS 304 is lower than BM(1206mV/SCE) and WM(369mV/SCE). Therefore, the local corrosion like pitting corrosion, galvanic corrosion and crevice corrosion of HAZ for STS 304 is more sensitive than BM and WM.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.5 no.1
• /
• pp.8-12
• /
• 2003

The optimal log conditions of cultivation are as follows. 1) Log-length, 100~120cm 2) Hole-depth, 1~1.5cm 3) It takes 55~67 days for primodia induction is possible to harvest fruiting bodies for 6~7 months. Meanwhile, the total of 10 species pest including Trichoderma sp. occurred during the cultivation.

• Korean Journal of Health Education and Promotion
• /
• v.11 no.2
• /
• pp.160-175
• /
• 1994

년대별로 본 한국인의 성장발육상태를 서로 비교해 봄으로서 얼마나 향상되었나 알아보고자 1910년도부터 1994년까지 각 저자들의 성적을 조사분석한 바 다음과 같은 결론을 얻었다. 1. 신체계측치인 신장, 체중, 흉위, 좌고는 가령에 따라 증가하고 있으나 성장 완료기에서는 각년도별로 점차 증가되었고 특히 1960년 이후 1994년에서는 그 성장이 현저하게 나타났다. 2. 신장과 체중은 평균 10년당 남자의 경우 1.3cm와 1.3kg씩 증가되었으며 여자는 1.6cm와 0.94kg씩 증가하였다(상기의 수치들은 평균증가치임). 3. 성장완료기에 있어서 각 년도별로 성장발육이 증가되었고 특히 1967년, 1983년, 1985년 그리고 1994년에 와서는 현저한 증가를 나타내었다. 이러한 현상은 사회적 경제적 제조건의 향상으로 한국인의 식생활이 좋아졌음으로 성장발육과 체위향상에 많은 영향을 미쳤다는 것을 입증하고 있다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.831-837
• /
• 2014

This paper focuses on the effects of the changes in the resistance characteristics caused by the changes of the POD shape installed in the Hydrofoil vessel, using the CFD(Computational Fluid Dynamics). We input the POD sections' basic shape as the origin of the x and y axis. Then as we cut the x-axis 0 to 2 cm, and the more we cut it, the total resistance value had increased. However, we have recognized the fact that as we cut the POD section, 3 to 5 cm, the resistance value had rather decreased. Furthermore we found out the result that as the cut partition was larger; the POD cross-section would decrease, resulting in the linear decrease of the viscous force.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.509-516
• /
• 2016

A dental panoramic radiography which usually uses low level X-rays is subject to the Nuclear Safety Act when it is installed for the purpose of education. This paper measures radiation dose and spatial dose rate by usage and thereby aims to verify the effectiveness of radiation safety equipment and provide basic information for radiation safety of radiation workers and students. After glass dosimeter (GD-352M) is attached to direct exposure area, the teeth, and indirect exposure area, the eye lens and the thyroid, on the dental radiography head phantom, these exposure areas are measured. Then, after dividing the horizontal into a $45^{\circ}$, it is separated into seven directions which all includes 30, 60, 90, 120 cm distance. The paper shows that the spatial dose rate is the highest at 30 cm and declines as the distance increases. At 30 cm, the spatial dose rate around the starting area of rotation is $3,840{\mu}Sv/h$, which is four times higher than the lowest level $778{\mu}Sv/h$. Furthermore, the spatial dose rate was $408{\mu}Sv/h$ on average at the distance of 60 cm where radiation workers can be located. From a conservative point of view, It is possible to avoid needless exposure to radiation for the purpose of education. However, in case that an unintended exposure to radiation happens within a radiation controlled area, it is still necessary to educate radiation safety. But according to the current Medical Service Act, in medical institutions, even if they are not installed, the equipment such as interlock are obliged by the Nuclear Safety Law, considering that the spatial dose rate of the educational dental panoramic radiography room is low. It seems to be excessive regulation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.15 no.1
• /
• pp.63-73
• /
• 2013

The research was conducted to determine a seed germination and seedling establishment of rice plant under seed coating materials such as iron, silicate, and phyllite and under covered with silicate and iron coated & silicate covered in the puddled wet hill seeding and wet line seeding methods. The seedling establishment was high in silicate and untreated control of 100%>phyllite coating of 91.5%>silicate coating of 88%>iron coating and silicate covered of 86%>silicate covered of 75.5% in the puddled wet hill seeding method, respectively. At 35days after treatment there was high in seedling height at silicate covered of 23.8cm>control of 23.6cm>silicate coating of 21.4cm>phyllite coating of 20.2cm>iron coating and silicate covered of 16.8cm>iron coating of 15.4cm. In puddle wet line seeding method rice seedling establishment was high at control and silicate covered of 100%>iron coating and silicate covered by 97.5%>phyllite coating by 94.8%>iron coating by 86%. Seedling height was high in silicate covered of 22.1cm>control of 21.2cm>silicate coating of 20.0cm>phyllite coating of 19.0cm>iron coating of 17.7cm>iron coating and silicate covered of 17.0cm, respectively.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.76-76
• /
• 2020

최근 안전한 먹거리 생산과 치유, 교육 등 다양한 목적으로 도시농업에 참여하는 인구가 늘어남에 따라 도시텃밭의 농약, 비료 사용 등으로 인한 환경오염과 해충 피해, 농산물의 건강성 등 다양한 문제가 제기되고 있다. 따라서 도시텃밭 작물의 생육 증진, 잔류농약 문제 해결 등 농산물 안정성 증가에 기여하고자 식물추출물을 활용한 엇갈이 배추의 생육특성을 조사하였다. 선행연구 결과를 바탕으로 자원식물류 5종(쇠비름, 소리쟁이, 명아주, 박주가리, 환삼덩굴)과 허브류 5종(메리골드, 서던우드, 캐모마일, 애플민트, 로즈마리), 식용작물류 5종(양파, 마늘, 부추, 차즈기, 들깨) 등 추출 대상 식물 15종을 60℃에서 3일간 건조시켜 마쇄하였다. 이후 각 식물체 100g을 35% 에틸알코올 1,000ml에서 7일간 추출하였다. 추출물은 30%로 희석하여 주 2회씩 총 3주간 배추에 엽면살포하였다. 엽면적, 엽수, 지상부 및 지하부 생체중 등 생육특성을 7일 간격으로 조사하였으며 그 결과는 다음과 같다. 엽면적과 엽폭은 환삼덩굴 처리구에서 104.58cm²와 9.80cm로 가장 넓었고, 엽장은 박주가리 처리구에서 25.24cm로 가장 길었으며, 지하부 생체중은 메리골드 처리구에서 6.24g으로 가장 높았다. 엽수는 애플민트와 마늘 처리구에서 6.4개로 가장 많았고, 지상부 생체중과 엽록소는 집단 간 유의한 차이가 나타나지 않았다. 전반적으로 무처리 대비 엽면적 22%, 엽폭 18%의 유의한 생장 차이를 보인 환삼덩굴 추출물과 엽면적 12%, 엽장 17%의 생장 차이를 보인 박주가리 추출물, 엽면적 10%, 엽폭 9%의 생장 차이를 보인 양파 추출물이 엇갈이 배추 생육에 효과적인 것으로 나타났다. 본 연구결과 환삼덩굴, 박주가리, 양파 등 일부 식물추출물이 엇갈이 배추의 생육을 증진시킬 수 있는 것으로 나타나 주말농장 등 도시텃밭에 활용할 수 있을 것으로 사료되었다. 향후 식물추출물의 효과성을 증진시키기 위해 추출 방법과 적정 농도, 보관 시기 등에 대한 연구와 함께 도시텃밭 해충방제 효과를 알아보기 위한 약해검정과 살충효과를 분석할 필요성이 있다.