• Journal of Embryo Transfer
• /
• v.15 no.2
• /
• pp.191-196
• /
• 2000

the present study was carried out to develop a completely defined culture system and determine if high NaCl concentrations in defined (PVA added) or semi-defined (BSA added) medium is toxic to bovine embryos. Oocytes from slaughterhouse ovaries were matured and fertilized in vitro. After 30 h of insemination, only 2-cell stage embryos were selected and cultured for this experiment. The culture media used were as follows : TLP(114 mM of NaCl) + BSA (3 mg/ml), TLP + PVA (1 mg/ml), mTLP(96 mM of NaCl) + BSA, mTLP + PVA. Six to ten embryos were placed into a 30$\mu$1 drop of each medium and the embryos were examined at 10 day post-insemination without medium renewal. The experiment was replicated 4 times. All data were analyzed by chi-square. There were no significant differences among TLP-BSA, mTLP-BSA and mTLP-PVA in blastocyst development (21.6, 17.2 and 20.2%), respectively. Also, no differences were obtained in hatching rates (11.7, 9.9 and 12.2%), respecitively. However, there were significant differences between TLP-PVA (1.7% and 0.6%) and other group in blastocyst formation and hatching rates, respectively (p<0.01). Development of in vitro produced embryos cultured in BSA containing medium was not affected by high NaCl concentration, but in the completely defined medium, embryonic development was highly affected by NaCl. This study shows that reduced NaCl concentration in completely defined medium is beneficial for development of bovine pre-implantation embryos in vitro.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.480-480
• /
• 2011

양극산화(anodization)는 금속을 전기화학적으로 산화시켜 금속산화물로 만드는 기술로서 최근 다양한 크기의 나노 구조를 제조하는 기술로 각광받고 있으며, 이러한 기술에 의하여 얻어지는 anodic aluminum oxide(AAO)는 magnetic data storage, optoelectronic device, sensor에 적용될 수 있는 nano device 뿐만 아니라 nanostructure를 제조하기 위한 template 및 mask로써 최근 광범위 하게 연구되고 있다. 또한, AAO는 Al2O3의 단단한 구조를 가진 무기재료이므로 solid mask로써 다른 porous materials 보다 뛰어난 특성을 갖고 있다. 또한 electron-beam lithography 및 block co-polymer 에 의한 patterning 과 비교하여 매우 경제적이며, 재현성이 우수할 뿐만 아니라 대면적에서 나노 구조의 크기 및 형상제어가 비교적 쉽기 때문에 널리 사용되고 있다. 그러나, AAO 형성 시 생기게 되는 반구형 모양의 barrier layer는 물질(substance)과 기판과의 direct physical and electrical contact을 방해하기 때문에 해결해야 할 가장 큰 문제점 중 하나로 알려져 있다. 따라서 본 연구에서는 실리콘 기판위의 형성된 AAO의 barrier layer를 Cl/BCl3 gas mixture에서 Neutral Beam Etching (NBE)과 Ion Beam Etching (IBE) 로 각각 식각한 후 그 결과와 비교하였다. NBE와 IBE 모두 Cl2/BCl3 gas mixture에서 BCl3 gas의 첨가량이 60% 일 경우 etch rate이 가장 높게 나타났고, optical emission spectroscopy (OES)로 Cl2/BCl3 플라즈마 내의 Cl radical density와 X-ray photoelectron spectroscopy (XPS)로 AAO 표면 위를 관찰한 결과 휘발성 BOxCly의 형성이 AAO 식각에 크게 관여함을 확인 할 수 있었다. 또한, NBE와 IBE 실험한 다양한 Cl2/BCl3 gas mixture ratio 에서 AAO가 식각이 되지만, 이온빔의 경우 나노사이즈의 AAO pore의 charging에 의해 pore 아래쪽의 위치한 barrier layer를 어떤 식각조건에서도 제거하지 못하였다. 하지만, NBE에서는 BCl3-rich Cl2/BCl3 gas mixture인 식각조건에서 AAO pore에 휘발성 BOxCly를 형성하면서 barrier layer를 제거할 수 있었다.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.263-270
• /
• 2010

Luteal cells produce progesterone that supports pregnancy. Steroidogenesis requires coordination of the anabolic and catabolic pathways of lipid metabolism. In the present study, the corpus luteum (CL) in early pregnancy established from luteal phase and pregnant phase was analyzed. The first study determined progesterone changes in the bovine CL at day 19 (early maternal recognition period) and day 90 in mid-pregnancy and compared them to the CL from day 12 of the estrous cycle. CL alternation was tested using two-dimensional polyacrylamide gel electrophoresis (2-DE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF). Comparing CL from luteal phase to those from pregnant phase counterparts, significant changes in expression level were found in 23 proteins. Of these proteins 17 were not expressed in pregnant phase CL but expressed in luteal phase counterpart, whereas, the expression of the other 6 proteins was limited only in pregnant phase CL. Among these proteins, vimentin is considered to be involved in regulation of post-implantation development. In particular, vimentin may be used as marker for CL development during pregnancy because the expression level changed considerably in pregnant phase CL tissue compared with its luteal phase counterpart. Data from 2-DE suggest that protein expression was disorientated in mid pregnancy from luteal phase, but these changes was regulated with progression of pregnancy. These findings demonstrate CL development during mid-pregnancy from luteal phase and suggest that alternations of specific CL protein expression may be involved in maintenance of pregnancy.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.11-23
• /
• 1995

The CAD/CAM system for the manufacturing automation is the newest technology in mechanical engineering area and becomes the important research subject nowadays. Most of all hardwares and softwares for the CAD/CAM system used in the our manufacturing companies such as automobile company are developed by the foreign country and the purchasing price of them is very expensive but their applicability to a certain area is very limited. This study was conducted to develope a CAD/CAM system for the design and the automatic manufacturing of the iron pattern shaped with 3 - dimensional free curved surface, and to test its applicability to the design and the manufacturing of the rotary blade. The results obtained from the study are as follow; 1. The CAD system which can process graphic procedures from the free curved surface shaped data was developed with personal computer. 2. The CAM main program was developed. This main program could produce CL data from CAD data file by checking the tool interference according to the cutting mode. 3. The sub. program which can simulate the tool trace from the CL data was developed. 4. The post processor for the Deckel FP2NC NC milling machine from CL data file was developed and the sub program could transmit NC program through modem to NC milling machine was developed. 5. The developed CAM system seemed to be applicable to any other system. Because the measuring results of the cross sectional thickness of the plastic model from the manufacturing iron pattern by the system showed that this system could properly check the tool interference. 6. In took 75~90 hours to manufacture two iron patterns of rotary blade. For the sake of convenience in applying to the other systems, this system was developed in BASIC and FORTRAN computer language and minimum portion of machine language as possible.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.45-45
• /
• 2017

The Indian meal moth, Plodia interpunctella, is one of the most important pests of stored food in the food processing industry worldwide. To control the Indian meal moth, methyl bromide, phosphine, high carbon dioxide, sulfuryl fluoride and plant essential oil fumigation have been considered. However, these treatments have disadvantages. For example, depleting the ozone layer, showing resistance in insect, low control efficacy or need high cost for treatment. Chlorine dioxide ($ClO_2$) is strong disinfectant and insecticide. The gas caused a malfunction in enzymes. The oxidative stress induced by $ClO_2$ gas treatment damaged to a physiological system and all life stages of P. interpunctella. The gaseous $ClO_2$ is a convincing alternative to methyl bromide for controlling P. interpunctella. The gaseous $ClO_2$ was generated by a chlorine dioxide generator (PurgoFarm Co., Ltd., Hwasung, Korea). It generated highly pure $ClO_2$ gas and the gas blown out through a vent into a test chamber. Gas entry to the chamber was automatically controlled and monitored by a PortaSene II gas leak detector (Analytical Technology, Collegeville, PA, USA). The properly prepared eggs, larvae, pupae, and adults of P. interpunctella were used in this experiment. Data were analyzed using SAS 9.4. Percentage data were statistically analyzed after arcsine-root transformation. Analysis of variance was performed using general linear model, and means were separated by the least significant difference test at P < 0.05. Fumigation is an effective management technique for controlling all stages of P. interpunctella. We found that $ClO_2$ gas treatment directly effects on egg, larvae, pupae and adults of P. interpunctella. The gas treatment with proper concentration for over a day achieved 100 % mortality in all stages of P. interpunctella and short time treatment or low concentration gas treatment results showed that the egg hatchability, pupation rate, and adult emergency rate were lowered compare with untreated control. Also, abnormal pupae or adult rate were increased. Gaseous $ClO_2$ treatment induced insecticidal reactive oxygen species (ROS), and it resulted in fatal oxidative stress in P. interpunctella. Taken together, these results showed that exposure proper concentration and time of the gas control all stages of P. interpunctella by inducing fatal oxidative stress. Further studies will be required to apply the gas treatment under real-world condition and to understanding physiological reaction in P. interpunctella caused by oxidative stress.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.539-553
• /
• 2001

Geochemical data of the Han river water, including four tributary water samples in the main Han river are presented in this paper. The concentration of dissolved ions in the North Han river water decreases in order of Ca>Na>K>Mg and HCO$_3$>NO$_3$>SO$_4$>Cl, which it mainly affected by the chemical weathering of granite and gneiss in the drainage basin. Meanwhile, the South Han river water shows a decreasing order of Ca>Mg>Na>K and HCO$_3$>SO$_4$>NO$_3$>Cl, which is controlled by the bed rock geology of carbornate rooks and the inflow of acid mine drainage from the metal and coal mines in the Taebaegsan and Hwanggangri areas. The main Han river waters are characterized by unusually high concentration of Na, Cl and SO$_4$ (Ca>Na>K>Mg and HCO$_3$>SO$_4$>CI>NO), indicating a significant anthropogenic pollution by human activities in the metropolitan Seoul city. The geochemical data of the Han river waters from 1981 through 1996 to 1999 records a significant increase in SO$_4$ and NO$_3$, which responsible for the increasing arid mane drainage and municipal anthropogenic pollution.

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.251-260
• /
• 2003

Distribution pattern of seawater intrusion was analyzed from the spatial distribution map of chloride using the geostatistics and CIS analyses. The chloride distribution map made by kriging(ordinary kriging and co-kriging) after exploratory spatial data analysis. Kriging provides an advanced methodology which facilitates quantification of spatial features and enables spatial interpolation. TDS, Na$^{＋}$, Br$^{[-10]}$ were selected as second parameters of co-kriging which is higher value of correlation coefficients between chloride and others groundwater properties. Chloride concentration is highest in yeminchon and coastal area. And result in co-kriging was accurate than ordinary kriging.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.1955-1960
• /
• 2010

A performance of CNC 3-axis pipe profile-cutting machine we developed was evaluated by measuring and verifying a positioning accuracy of its feeding unit and a cutting shape accuracy of pipe workpiece. The positioning accuracy was verified by comparing moving distance actuated by PLC motion controller with actual one measured by a laser interferometer. The cutting shape accuracy was also verified by comparing a cutting shape obtained through scanning and 3D modeling the pipe workpiece with that through CL data.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.95-104
• /
• 2018

Gas-liquid bubble column reactors are extensively used in industrial processes. A detailed knowledge of bubble size distribution is needed for determining the mass transfer in gas-liquid film. Experimental data on bubble size distribution and liquid-side mass transfer coefficient($k_L$) were used to calculate the estimated time to saturation in bubble column reactor. Also, the gas flux was evaluated to the liquid-side mass transfer coefficient($k_L$) and solubility data for hydrogen sulfide($H_2S$) and chlorine($Cl_2$) absorption into water. Simulation results show that $H_2S$ absorption time to 50 % of saturation concentrations are 611 sec and 1,329 sec when bubble diameters are 0.5 mm and 4.5 mm, while absorbing 1 % $H_2S$ gas. In case of $Cl_2$, absorption time range 657 to 1,400 sec when bubble size range 0.5 mm to 4.5 mm, while absorbing 1 % $Cl_2$ gas. Calculated simulation results can be used in the design of emergency relief bubble reactors.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.34.2-34.2
• /
• 2021

SPT-CL J2106-5844 is the most massive galaxy cluster at z>1 discovered to date. It has been known to be an isolated system with a singular, well-defined halo. However, recent studies provide lines of evidence for its merging state. We strengthen the case with the multi-wavelength observations from ALMA, ACA, ASKAP, ATCA, and Chandra. With the sensitive, high resolution ALMA+ACA observations, we reconstruct the ICM pressure map from the thermal SZ effect. It reveals two main gas components that are associated with the mass clumps inferred from the weak-lensing analysis. Furthermore, the X-ray hardness map supports the bimodal gas distribution. With these multi-wavelength data, we probe the merger phase in SPT-CL J2106-5844.