• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.40-48
• /
• 2012

This paper models the hue shift phenomenon and proposes a hue correction method to give perceptual matching between projector with and without additional white channel. To quantify the hue shift phenomenon for whole hue angle, 24 color patches with the same lightness are frist created along equally-spaced hue angle, and these are displayed one by one both displays with different luminance levels. Next, each hue value of the patches appeared on the projector with additional white channel is adjusted by observers until the hue values of patches on both displays appear the same visually. After obtaining the hue shift values from the color matching experiment, these values are piecewise fit into six polynomial functions, which approximately determine shifted hue amounts for an arbitrary hue values of each pixel in projector with additional white channel and are utilized to correct them. Actually, an input RGB image is converted to CIELAB LCH color space to get hue values of each pixel and this hue value is shifted as much as the amount calculated by the functions of hue shift model for correction. Finally, corrected image is inversely converted to an output RGB image. For an evaluation, the matching experiment with several test images and the z-score comparisons were performed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2010

Until now, evaluating the efficacy of brightening mainly depends on total reflective light measurement. For example, SHV (Saturation, Hue, Value), $L^*$ $a^*$ $b^*$ (CIELAB color space system) color space system was used and lightness and saturation changes were chosen as major parameters for evaluating brightening effect. However, those parameters were calculated from total reflective light on the skin and it is hard to evaluate perceptive efficacy such as luminescence, and glossy. In this research, we applied new method for estimating change of luminescence of skin by using 'Lumiscan' which uses polarized light for detecting surface and inside reflective light independently. We also tested 15 different parameters for finding correlations between luminescence and those parameters. As a results, our 2 different brightening products showed 5 ~ 9 % increase of luminescence at 4 and 8 weeks. And we also found that skin roughness (-28 %), melanin index (-17 %), redness (-7 %), hydration (15 %), and lightness (6 %) were related to luminescence of skin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.2
• /
• pp.121-127
• /
• 2011

Skin darkness is the source of trouble to many women. Skin darkness is the state that while skin redness and brightness are reduced, skin yellowness is increased. Skin translucency which is measured by skin color, especially brightness is an another expression of skin darkness. Skin brightness is usually expressed by L value of $L^{*} \;a^{*}\; b^{*}$ (CIELAB color space system). However, it is hard to find the relationship between L value and perceptive efficacy such as translucency because the L value is just a factor of evaluation of skin darkness. The skin with high translucency has high scattering reflective light value than low value. In this study, we measured the skin translucency of 20 ~ 30 ages men and women face by both our designed previous device which use polarized light to detect surface and scatter reflective light independently and $Lumiscan^{TM}$ which is improved designed to confirm our new device working ability by calculation of relationship between trnaslucency and scattering reflective light value. The result of this study indicate that there is a high correlation (R = 0.732, p < 0.01) between translucency and scattering reflective light value, and suggest that $Lumiscan^{TM}$ is portable and easy measuring device more that previous device.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.104-113
• /
• 2022

Plants under the genus Orostachys have been known as medicinal plants. This study deems to determine the growth and leaf color of Orostachys japonica and O. boehmeri when subjected to various LED light sources. A total of seven LED light treatments were used, i.e. red (630 nm), green (520 nm), blue (450 nm), purple (650 and 450 nm), 3000 K white (455, 600 nm), 4100 K white (455, 590 nm), and 6500 K white (450, 545 nm) LEDs. Results showed that O. japonica plants showed favorable growth under 4100 K white LED, while O. boehmeri plants had a positive growth response under white light LEDs (3000, 4100, and 6500 K). In leaf color analysis, the use of green LED showed the greatest change in CIELAB L^* and b^* values which were relatively higher compared to other treatments indicating that leaves turned yellowish. Further statistical analysis using Pearson's correlation also suggested that there is a small negative association between dry weight and b^* values of O. japonica, and a negative moderate association between plant weights (fresh and dry weight) and leaf color (L^* and b^*) and positive association between said plant weights and a^* color values of O. boehmeri. Therefore, it is recommended to cultivate O. japonica under 4100 K white LED and O. boehmeri under 3000, 4100, 6500 K white LEDs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.12
• /
• pp.1405-1411
• /
• 2003

본 연구의 목적은 기계에 의한 객관적 오염제거 평가와 육안에 의한 주관적 오염제거 평가를 비교하기 위한 것이다. 본 연구를 위해 백색의 순면직물과 65%/35% 폴리에스테르/면직물 시료에 9가지의 오염을 각각 처리한 오염포를 제작한 후, 세탁 실험을 하였다. 주관적 오염제거의 평가는 오염시키지 않은 포를 기준시료로 하여 오염포와 같은 조건으로 세탁한 후, 오염제거도를 AATCC Gray Scale for Staining으로 평가하였다. 세탁 후 오염제거도를 객관적으로 평가하기 위해서 각 시료의 K/S values, CIELAB, CMC, ASTM E313 Whiteness Index(WI), ASTM E313 Yellowness Index, and CIE tristimulus values를 구하였고. 세탁에 의한 control 시료의 반사율 변화에 대한 오염포의 반사율 변화를 비교한 오염제거율(PSR)을 구하였다 육안에 의한 주관적 평가 결과와 기계에 의한 객관적 평가의 결과와의 관계를 파악하고자 상관분석을 실시하였다. 본 연구 결과, 주관적 평가와 객관적 평가사이에 유의적인 상관관계가 확인되었으며, 주관적 평가 결과 중 WI가 주관적 평가 결과와 가장 상관관계가 높았으며, PSR과 주관적 평가 결과와의 상관이 상대적으로 가장 낮은 것으로 나타났다. 따라서 백색포의 오염 판정이 필요한 산업체에서 현재 많이 사용하고있는 PSR보다는 WI나 다른 색차를 이용하여 객관적 오염 평가를 하는 것이 주관적인 오염평가 결과에 더 근접할 수 있음을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.1011-1025
• /
• 2014

A demosaicing method for a Bayer-like W-RGB color filter array (CFA) is proposed. When reproducing images from a W-RGB CFA, conventional color separation methods for W-RGB CFA are likely to cause blurring near the edges due to rough averaging using a color ratio of neighboring pixels. Moreover, these methods cannot be applied to real-life digital cameras with W-RGB CFA because the methods were proposed under an ideal situation, W=R+G+B, not a real-life situation, $W{\neq}R+G+B$. To improve edge performance, we propose a method of constant color difference assumption with inversed weight, which uses information from all edge directions for interpolating all missing color channels. The proposed method calculates the correlation between W, R, G, and B to enable its application to real-life digital cameras with W-RGB CFA. Simulations were performed to evaluate the proposed method using images captured from a real-life digital camera with W-RGB CFA. Simulation results shows that we can demosaic by using the proposed algorithm compared with the conventional one in about +34.79% SNR, +11.43% PSNR, +1.54% SSIM and 14.02% S-CIELAB error. Thus, the proposed method demosaics better than the conventional methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.1-10
• /
• 2016

A system which provides multispectral near-IR and visible gray images of objects is constructed and an algorithm is derived to acquire a natural color image of objects from the gray images. A color image of 24 color patches is obtained by recovering their CIE (International Commission on Illumination) LAB color coordinates $L^*$, $a^*$, $b^*$ from their gray images using the algorithm based on polynomial regression. The system is composed of a custom-designed LED illuminator emitting multispectral near-IR illuminations, fluorescent lamps and a monochrome digital camera. Color reproducibility of the algorithm is estimated in CIELAB color difference ${\Delta}E^*_{ab}$. And as a result, if yellow and magenta color patches with around 10 ${\Delta}E^*_{ab}$ are disregarded, the average ${\Delta}E^*_{ab}$ is 2.9, and this value is within the acceptability tolerance for quality evaluation for digital color complex image.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.11-19
• /
• 2006

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference$({\Delta}E^*)$ was increased by sputtering conditions with increasing ion current and treatment time. Especially, $Lightness(L^*)$ value of PET was remarkably increased by sputtering, whereas $Chroma(C^*)$ increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.2
• /
• pp.90-94
• /
• 2013

In this paper, we propose a new algorithm to improve the contrast ratio, to preserve information of bright regions and to maintain the color of backlight image that appears with a great relative contrast. Backlight images of the natural environment have characteristics for difference of local brightness; the overall image contrast improvement is not easy. To improve the contrast of the backlight images, MSR (Multi-Scale Retinex) algorithm using the existing multi-scale Gaussian filter is applied. However, existing multi-scale Gaussian filter involves color distortion and information loss of bright regions due to excessive contrast enhancement and noise because of the brightness improvement of dark regions. Moreover, it also increases computational complexity due to the use of multi-scale Gaussian filter. In order to solve these problems, a linear MSR is performed that reduces the amount of computation from the HSV color space preventing the color distortion and information loss due to excessive contrast enhancement. It can also remove the noise of the dark regions which is occurred due to the improved contrast through edge preserving filter. Through experimental evaluation of the average color difference comparison of CIELAB color space and the visual assessment, we have confirmed excellent performance of the proposed algorithm compared to conventional MSR algorithm.

• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2004

The dyeings of cotton and silk fabric with Laurus tree extracts were investigated. The colorant was extracted with distilled water at $100^{\circ}C$ for lh. Dyeability(K/S), color fastness and antibacterial property of cotton and silk fabric were tested under conditions of various time, temperature, concentration, repeat-number of dyeing and mordants. The characteristics of dyeings Laurus extracts were figured out by K/S and CIELab values and color-fastness test was estimated in terms of wash fastness and light fastness. The maximum wavelength of spectrum was 670nm. The K/S value of cotton and silk fabric increased with increasing dyeing time and the exhaustion was saturated in 90min. Optical dyeing temperatures of cotton and silk fabrics were $60^{\circ}C$ and $80^{\circ}C$, respectively. The mordant effect on cotton fabric was achieved using Fe mordant. On the other hand, the mordant effect on silk fabric was obtained using Fe and Cu mordants. The wash fastness of cotton fabric was higher than that of silk fabric. Antibacterial property of silk dyeing was greater than that of cotton dyeing. In addition, the excellent antibacterial effect was imparted by Fe-post mordant method.