• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.90-94
• /
• 2003

Recently, many nations have released standard such as IEC 1000-3-2 and IEEE 519 which impose a limit on the harmonic current drawn by equipment connected to AC line in order to prevent the distortion of an AC line. Among the wide variety of active methods for improving power factor and harmonic distortion, the boost converter is very effective because it has a continuous line current , small choke filter and high power factor. In high power application, however, the bridge diode loss in the boost converter has made the efficiency lower and the temperature of the board higher. A new approach without bridge diode to make the same characteristics of the conventional boost converter has also been developed. This paper present the comparisons between the continuous current mode(CCM) operated conventional boost converter and the boundary current mode(BCM) operated the bridgeless boost converter for high efficiency and high power factor.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.242-248
• /
• 2012

Self oscillating current fed push pull resonant inverters can be controlled without using special drivers. Dc current flows through the choke coil and the power switches, although the driving signals of the power switches are sinusoidal. When the base current is near zero, the transistors cannot be operated in switching mode. Hence higher switching power losses and instantaneous peak power during off transitions are observed. In this study, an alternative design has been proposed to overcome this problem. A prototype circuit has been built which provides dc bias current to the base of the transistors. Experimental results are compared with theoretical calculations to demonstrate the validity of the design. The proposed design decreases the peak and average power losses by about 8 times, when compared to conventional designs.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.441-447
• /
• 2005

The present study is aimed at understanding the flow physics associated with a safety valve applied to LNG ship engines. One-dimensional gasdynamic analyses and axisymmetric, compressible Navier-Stokes computations have been carried out to provide a qualitative and quantitative knowledge base for an effective design of the safety valve. Gasdynamic forces and thrust coefficients are obtained regarding a change in chamber pressure and distance between the nozzle exit and valve sheet which are major parameters to offer a variation in the flow feature. The present results show that the control of the passage area between the nozzle exit and valve sheet can attenuate the strength of shockwave generated in front of the valve sheet, which causes harm to stable system operation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.6
• /
• pp.287-290
• /
• 2006

A class-E CMOS RF(Radio frequency) power amplifier with a 1.8 Volt power supply is designed using $0.25{\mu}m$ standard CMOS technology. To drive the class-E power amplifier, a Class-F RF power amplifier is used and the reliability characteristics are studied with a class-E load network. After one year of operating the power amplifier with an RF choke, the PAE(Power Added Efficiency) decreases from 60% to 47% and the output power decreases 29%. However, when a finite DC-feed inductor is used with the load, the PAE decreases from 60% to 53% and the output power decreases only 19%. The simulated results demonstrate that the class-E power amplifier with a finite DC-feed inductor exhibits superior reliability characteristics.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.33-40
• /
• 1999

Upgrade development of a high pressure ratio centrifugal compressor in marine engine turbochargers is presented. A new matched operating point at increased speed of rotation was determined through system cycle analysis using the exisitng test data of turbine performance. Under some severe restrictions for geometric parameters, the state-of-the-art methods of both aerodynamic design and CFD analysis were applied, in which only an impeller, a vaned diffuser and some part of casing wall were modified. Prototype hardware was fabricated and assembled for system performance tests. Excellent performance in pressure ratio and efficiency was obtained over whole speed region. Reduced surge and choke margin was, however, observed at design speed of rotation.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.167-173
• /
• 2003

For the measurement of mass flow rate at a wide range of operation conditions, it is required that the critical nozzle gas different diameters, since the mass flow rate through the critical nozzle depends on the nozzle supply conditions and the nozzle throat diameter. In the present study, both computational and experimental investigations are performed to explore the variable critical nozzle. Computational work using the 2-dimensional, axisymmetric, compressible Navier-Stokes equations are carried out to simulate the gas flow through variable critical nozzle. In experimnet, a cylinder with several different diameters is inserted into the critical nozzle to vary the nozzle throat diameter. Computational results are compared with the experimented ones. The computed results are in close agreement with experiment. It is found that the displacement and momentum thickness of variable critical nozzle are given as a function of Reynolds numbers. The discharge coefficient of the variable critical nozzle is predicted using an empirical equation.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.123-125
• /
• 2007

포항가속기연구소가 추진 중인 제4세대 방사광가속기에는 100 PPM급의 클라이스트론 펄스전압 안정도가 요구된다. 이러한 안정도는 PFN(pulse forming network)에 충전되는 전압을 얼마나 정밀하게 제어하는가에 따라서 결정된다. PFN의 최종운전 전압은 deQing circuit에 triggering되는 시점에 따라서 결정된다. DeQing trigger system은 PFN의 충전전압과 기준전압을 비교하여 충전전압이 기준전압보다 커지는 시점에서 charging choke(충전 쵸크)의 2차에 구성된 deQing 회로의 SCR를 트리거 시켜서 충전 쵸크 1차와 2차의 권선비율이 25:1인 충전 쵸크의 2차를 단락시켜 1차에 흐르는 전류를 2차로 빼주어서 PFN 커패시터에 더 이상 충전되지 않게 하는 구조로 되어있다. DeQing circuit에 triggering되는 시점을 정밀하게 제어하기 위하여 PFN 충전전압을 미분하여 그 출력전압에 비례하여 트리거 출력을 지연시키는 기능과 analog 신호를 digital 신호로 변환하는 기능을 사용하였다. 이 논문에서는 deQing 시스템에 관련된 회로 및 시험결과에 대하여 설명하고자 한다.

• Korean Journal of Psychosomatic Medicine
• /
• v.12 no.2
• /
• pp.95-102
• /
• 2004

Backgrounds: It was thought that sport was related with mentality. Compared to psychology, psychiatry has so far paid rather little attention to athletes. In this overview, I attempted to introduce the ideas of various observers of sports with the view of clinical psychiatry and summarized basic principle role of psychiatrist. Results and Discussions : To understand the athletic frame of mind, it is helpful to observe athletes in their psychologic development and when we do so we can quickly see trends that are not apparent by observing mature athletes alone. Psychobiology of sport would discuss some of the endogenous neurochemicals(hormone, neurotransmitter) that may be part and parcel of the athlete's psychiatric status. The psychological problems that frequently interfere with training and competition may be divided into five categories 1) choke, 2) slump, 3) injury, 4) interpersonal problem, 5) training dilemma. Psychiatric problem also arise in athletes like general people. various method for psychiatric patients like psychotherapy, group therapy, family systems perspective, and pharmacotherapy could been applied to sports psychiatry. Conclusions Although the contribution of sports psychiatry to sport is clinical one, psychiatrist's interest in role and conflict of athlete would enhance the molding of humanistic athletes who enjoy their life and sports.

• Journal of Korea Game Society
• /
• v.17 no.5
• /
• pp.27-38
• /
• 2017

The purpose of this study is to analyze the game dynamics of 'Battle Royale' genre and how these dynamics create dramatic tension, focused on . Battle Royale games maintain the dramatic tension through the intersection of uncertainty and inevitability. Uncertainty is reinforced by randomness of the game world and hidden information of player statement. Inevitability is emerged from the level design with choke point, and restriction of playable field over time. From this mechanism, Battle Royale genre establishes the gameness which derives player's meaningful choice and maintains player's tension until the end of the game.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.337-345
• /
• 2002

The present study addresses a computational result of unsteady gas flow through a critical nozzle. The axisymmetric, unsteady, compressible, Wavier-Stokes equations are solved using a finite volume method that makes use of the second order upwind scheme for spatial derivatives and the multi-stage Runge-Kutta integral scheme for time derivatives. The steady solutions of the governing equation system are validated with the previous experimental data to ensure that the present computational method is valid to predict the critical nozzle flows. In order to simulate the effects of back pressure fluctuations on the critical nozzle flows, an excited pressure oscillation with an amplitude and frequency is assumed downstream of the exit of the critical nozzle. The results obtained show that for low Reynolds numbers, the unsteady effects of the pressure fluctuations can propagate upstream of the throat of critical nozzle, and thus giving rise to the applicable fluctuations in mass flow rate through the critical nozzle, while for high Reynolds numbers, the pressure signals occurring at the exit of the critical nozzle do not propagate upstream beyond the nozzle throat. For very low Reynolds number, it is found that the sonic line near the throat of the critical nozzle remarkably fluctuateswith time, providing an important mechanism for pressure signals to propagate upstream of the nozzle throat, even in choked flow conditions. The present study is the first investigation to clarify the unsteady effects on the critical nozzle flows.