• Preventive Nutrition and Food Science
• /
• v.18 no.3
• /
• pp.175-180
• /
• 2013

The purpose of this study was to determine the effects of a pre-exercise meal on the plasma human growth hormone (hGH) response and fat oxidation during walking. Subjects (n=8) were randomly provided with either 1 g/kg body weight of glucose in 200 mL water (CHO) or 200 mL water alone (CON) 30 min prior to exercise and subsequently walked on a treadmill at 50% of VO2max for 60 min. Plasma hGH concentrations were significantly higher in subjects who received CHO compared to those who received CON at 15 and 30 min. The fat oxidation rate in the CHO was significantly lower than the CON while walking for 5~15, 25~35 and 45~55 min. Plasma FFA levels were also significantly lower in the CHO compared to the CON at 30, 45 and 60 min. Plasma glucose levels in the CHO were significantly lower while plasma insulin levels were significantly higher than in the CON at 15 and 30 min. Therefore, the results of this study suggest that the elevation of plasma hGH levels due to the intake of a pre-exercise meal may not be strongly related to fat oxidation and plasma free fatty acid (FFA) levels during low-intensity exercise.

• Journal of the Korean Ceramic Society
• /
• v.43 no.10 s.293
• /
• pp.613-618
• /
• 2006

Graphite is suitable materials as a moderator, reflector, and supporter of a nuclear reactor because of high tolerance to the high temperature and neutron irradiations. Because graphite is so weak to the oxidation, its oxidation study is essentially demanded for the operation and design of the nuclear reactor. This work focuses on the effect of the surface oxidation of graphite according to the surface treatment. With thermogravimeter (TG), oxidation characteristics of the isotropic graphite are measured at the three temperature areas, and oxidation ratio and amounts are estimated as changing the surface roughness. Furthermore, the polished graphite surface produced fom the surface treatment is investigated with the Raman spectroscopic study. Oxidation behaviors of the surface are also evaluated as elimination the polished layer by washing with strong sonication.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1667-1670
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2525-2527
• /
• 2008

• Journal of Microbiology and Biotechnology
• /
• v.22 no.10
• /
• pp.1452-1456
• /
• 2012

The anaerobic oxidation of methane (AOM) in anaerobic sewage sludge was characterized. The net methane oxidation was observed in samples amended with methane plus sulfate or with methane alone, whereas methane formation was observed in the samples without methane, indicating that methane oxidation and formation occurred simultaneously. The ratio of the net methane oxidation rate to $H_2S$ formation was 100:1, suggesting that the AOM was not closely associated with sulfate reduction in the anaerobic sludge. The net AOM was positively associated with the methane concentration and sludge dilution ratio. However, the rate of AOM was negatively correlated with organic substrate (acetate) concentration. Therefore, the production and oxidation of methane could be controlled by environmental conditions and dissolved organic compounds in the bulk solution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.345-350
• /
• 2014

The surface oxidation mechanism of lead-free solder alloys has been investigated with multiple reflow using X-ray photoelectron spectroscopy. It was found that the solder surface of Sn-Ag-Cu-In solder alloy is surrounded by a thin $InO_x$ layer after reflow process; this coating protects the metallic surface from thermal oxidation. Based on this result, we have performed a wetting balance test at various temperatures. The Sn-Ag-Cu-In solder alloy shows characteristics of both thermal oxidation and wetting balance better than those of Sn-Ag-Cu solder alloy. Therefore, Sn-Ag-Cu-In solder alloy is a good candidate to solve the two problems of easy oxidation and low wettability, which are the most critical problems of Pb-free solders.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.299-306
• /
• 2003

The SCM420 used mainly to automobile transmission gear has problems that it costs transmission gear maker much money in carburizing treatment. For this, it needs to alternate the existing material and heat treatment to new gear material and surface modification. For this, friction and wear experiment according to sliding speed and applied load was carried out to evaluate the wear resistance of two transmission gear materials with oxidation nitrocarburising and non-oxidation nitrocarburising NT100, The presumed wear volume was calculated with the image processing for evaluation of wear resistance of two transmission gear materials. The results show that the oxidation nitrocarburising has a distinguished wear resistance than non-oxidation nitrocarburising.

• Carbon letters
• /
• v.7 no.3
• /
• pp.196-200
• /
• 2006

Graphite has hexagonal closed packing structure with two bonding characteristics of van der Waals bonding between the carbon layers at c axis, and covalent bonding in the carbon layer at a and b axis. Graphite has high tolerant to the extreme conditions of high temperature and neutron irradiations rather than any other materials of metals and ceramics. However, carbon elements easily react with oxygen at as low as 400C. Considering the increasing production of today of hydrogen and electricity with a nuclear reactor, study of oxidation characteristics of graphite is very important, and essential for the life evaluation and design of the nuclear reactor. Since the oxidation behaviors of graphite are dependent on the shapes of testing specimen, critical care is required for evaluation of nuclear reactor graphite materials. In this work, oxidation rate and amounts of the isotropic graphite (IG-110, Toyo Carbon), currently being used for the Koran nuclear reactor, are investigated at various temperature. Oxidation process or principle of graphite was figured out by measuring the oxidation rate, and relation between oxidation rate and sample shape are understood. In the oxidation process, shape effect of volume, surface area, and surface to volume ratio are investigated at $600^{\circ}C$, based on the sample of ASTM C 1179-91.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.802-804
• /
• 2005