• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.20-28
• /
• 2000

Air wiping technique is widely used because of easy and efficient coating control in present CGL The coating weight is controlled by nozzle header pressure. strip line speed, and the distance between strip and nozzle. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. We investigates the main cause of coating defects, such as edge overcoating and coating deviation through various experiments. It is found that the edge overcoating is mainly come from nozzle lip type, and the coating deviation is caused by the unbalance of dynamic pressure.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.103-122
• /
• 1993

A cause and counterplan of the increase in dark decay rate of$\varepsilon$-CuPc/PVCz photoreceptor which is consist of the carrier generation layer (CGL) of$\varepsilon$type copper phthalocyanine ($\varepsilon$-CuPc) thin film by an aqueous coating method and the carrier transport layer (CTL) of polyvinylcarbazol (PVCz) by spin coating, are studied in this paper. Electrochemical deposition of CGL was accompanied by an increase in work function of the aluminium substrate during the processes and the enhanced work function 5.3 eV rose above the ionization potential 5.16 eV of $\varepsilon$-CuPc. This resulted in the increased injection of holes from substrate into CGL and a fast dark decay rate. Improved photoreceptor, an electron-transport $\varepsilon$-CuPc/TNF photoreceptor, led to lowing of dark decay rate and increasing of photosensitivity. The carrier generation efficiency (ηg), carrier injection efficiency (ηi) and xerographic gain (G) of the $\varepsilon$-CuPc/TNF photoreceptor were obtained by XTOF method and PIDC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.121.5-121
• /
• 2001

For the last decade, remarkable progress in the coating weight uniformity of hot dip galvanized product has been made to overcome the tightening quality constraints and produce cost-effective galvanized products. This progress results from research and development works for more efficient air knife, more accurate model of coating process, more precise measurement of coating weight and more efficient control logics. The activities for an efficient mathematical model to predict coating weight and several control logics which has been implemented on the No.1 CGL, No. 2 CGL, and PGL at KwangYang Steel Works are reviewed in this article.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.8
• /
• pp.553-561
• /
• 2017

The main motivation for this study was to establish a CFD-based procedure for the analysis of heating characteristics, particularly in industrial furnaces. As certain open-source software packages have gained popularity in dealing with complex industrial problems, the OpenFOAM framework was selected for further development of advanced physical models to meet industrial requirements. In this study, the newly developed comprehensive model was applied to simulate physical processes in the full-scale horizontal furnace of a continuous galvanizing line (CGL). The numerical results obtained indicate that the current approach predicts heating characteristics reasonably well. It was also found that radiative heat transfer plays a dominant role in heating the moving strip. To improve the predictability of our method, further work is required to model the turbulence-chemistry interaction realistically, as well as to impose a physically correct thermal wall boundary condition.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.105-108
• /
• 2010

The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/$m^2$ on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an $L_9(3^4)$ orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15 %.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.210-214
• /
• 2014

We investigated emission characteristics of tandem organic light emitting devices (OLEDs) with p-type materials as charge generation layer. The tandem OLEDs were fabricated by using $MoO_x$, $WO_x$, C60 and HATCN as p-type material or not using p-type material for charge generation. When HATCN was used as p-type material, it showed high current density at low applied voltage, but increase of efficiency was small because of charge unbalance in emitting layer. In case of tandem OLED not using p-type material, applied voltage increased remarkably because of difficulty of hole injection. In case of $MoO_x$, $WO_x$ or C60 as p-type material, current emission efficiency increased greatly. In particular, current emission efficiency of tandem OLED using $MoO_x$ as p-type material increased up to 3 times than current emission efficiency of single OLED. The Commission Internationale de l'Eclairage (CIE) 1931 color coordinates were changed by overlapping of 504 nm emission wavelength. As a result, emission efficiency of tandem OLED improved compared with single OLED, but driving voltage also increased by increase of organic layer thickness.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.1.1-11
• /
• 1994

The photosensitive properties and carrier transport in the organic photoconductor with the carrier transport layers(CTL) of polymer matrix doped with two carrier transport materials above carrier generation layer(CGL) containing oxotitanium phthalocyanine (TiOPc) were investigated. The CGL of TiOPc dispersed in poly(vinylbutyral) was formed as thickness of 0.1${\mu}{\textrm}{m}$and the carrier transport layer was prepared by coating polycarbonate and polyester doped with oxadiazoly(OXD), polyvinylcarbazole (PVK), trinitro fluorenone(TNF) as thickness of 10~15${\mu}{\textrm}{m}$, respectively. We have measured half decay exposure,sensitivity and xerographic gain from the photo-induced discharge curve(PIDC). In this work, it was found that the characteristics of carrier transport were mainly caused by the ionization potential difference of constitutive materials in molecularly doped polymer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.8 no.1
• /
• pp.1-20
• /
• 1990

$\alpha$,$\beta$,$\varepsilon$ type copper phthalocy $\alpha$,$\beta$,$\varepsilon$ type copper phthalocyanine(CuPc) pigment was purified by a simple train sublimation technique. The layered photoconductor was made with $\varepsilon$ type CuPc as a carrier generation layer(CGL) and polyvinly carvazol(PVCz) as a carrier transport layer(CLT). A CGL of CuPc was electrochemical deposited on an Al substrate used as cathode in pigment dispersion solutions. a CTL of PVCz pwas spin coated on $\varepsilon$ type CuPc thin film by a spin coater. The effect of sonication time, electrophotographic property of the layered photoconductor were studied with surface coverage, surface potential and sensitivity.

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1420-1425
• /
• 2008

This study was conducted to investigate the fermentation characteristics of cheonggukjang prepared with soybean germinated under light condition. The moisture content and pH of cheonggukjang made with soybean germinated under light condition (CGL) were higher than that of cheonggukjang made with non-germinated soybean (CNG). The color of CGL was darker than that of CNG and cheonggukjang made with soybean germinated under dark condition (CGD). The number of live bacteria in the CGL ($10.7{\pm}0.3\;\log\;CFU/g$) and CGD ($10.7{\pm}0.4\;\log\;CFU/g$) was higher than that of CNG ($9.7{\pm}0.4\;\log\;CFU/g$). The levels of isoflavone in CGL, CGD and CNG were 2,038.0, 1,993.6 and 1,747.0 ug/g, respectively. There were no significant differences in the appearance, aroma, taste and overall acceptability of the cheonggukjang made with different germination conditions. Therefore, it was expected that the cheonggukjang prepared with soybean germinated under light condition could be practically used as a new fermented food.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.359-362
• /
• 2010

본 논문에서는 적층형 백색유기발광 조명소자를 제작하여 단층형 구조와 비교 분석하는 연구와 CGL(Charge Generation Layer)의 두께 변화에 따른 소자특성 연구를 하였다.