• 제목/요약/키워드: CFX

검색결과 511건 처리시간 0.029초

전산해석을 이용한 산업용 오일펌프 성능개선에 관한 연구 (A Study on Performance Improvement of Industrial Oil Pump Using Computational Analysis)

  • 김진우;이현준;공석환;이성원;정원지
    • 한국산업융합학회 논문집
    • /
    • 제25권6_2호
    • /
    • pp.1111-1117
    • /
    • 2022
  • Recently, interest in the circular economy has emerged in the industry. As a result, interest in Re-manufacturing, which makes old equipment similar to new products, is growing. In the machine tool industry with many aging equipment, the Re-manufacturing industry is essential, and among them, research on the performance improvement of gear type oil pumps was conducted. The purpose was to achieve the target performance of flow rate and volume efficiency by changing the shape of the gear pump housing clearance and inlet/outlet, and Computational Fluid Analysis and Central Composite Design were conducted using ANSYS CFX 2022 R2 and MINITAB®. The level of each determined factor was determined. 20 design points were derived, and the Flow Rate at each design point was calculated, and the Theoretical Flow Rate was calculated to obtain Volumetric Efficiency. The optimal design point was obtained when the Flow Rate was 140 lpm and the Volumetric Efficiency was maximum, the optimal design point was obtained when both were maximum, and the Surface Plot for each factor was obtained to identify the tendency.

원심펌프 회전차 Modification시 성능개선에 관한 유동해석 연구 (A Fluid Analysis Study on Centrifugal Pump Performance Improvement by Impeller Modification)

  • 이아영;장현준;이진우;조원정
    • 한국가스학회지
    • /
    • 제24권2호
    • /
    • pp.1-8
    • /
    • 2020
  • 원심펌프는 통상적으로 임펠러를 고속으로 회전시켜 원심력을 통해 유체 에너지를 전달하는 설비로서 기화용 해수펌프, 공업용수 및 해수를 사용하는 소화펌프 등 많은 LNG 생산기지에서 사용하고 있는 주요 프로세스 설비이다. 현재 LNG 플랜트 현장에서의 펌프는 장기간 수요처가 원하는 공급량에 따라 운전조건이 변동되어 펌프의 성능이 저하되고 있다. 특히 펌프는 플랜트 현장에서 소비 전략량의 많은 부분을 차지하고 있어, 최적의 운전조건을 찾지 못한다면 장기간 플랜트 운영 시 막대한 에너지 손실비용을 발생할 수 있다. 이러한 문제점을 해결하기 위해 펌프의 운전조건별 변동에 따른 유동해석 및 결과분석을 통하여 성능저하 요인을 파악하고 최적의 운전조건을 확인하는 기술이 필요하다. 실험기법을 통해 운전 효율성 평가를 하기 위해서는 현장의 운전조건과 실험장비 제작 등 상당한 시간과 비용이 발생되기 때문에 신속하고 정확한 전산유체역학(CFD) 기법을 활용하여 본 연구에서 결과를 도출하였다. 펌프의 성능이 현장의 사정에 맞지 않아 펌프 성능을 줄일 필요가 있는 경우, 회전수에 변화를 주거나 고점도 혹은 고형물이 함유된 특수액을 사용하는 방법 등이 사용된다. 특히 LNG 생산기지의 설비운영에 차질이 발생하지 않도록 하기 위해 단시간 내에 펌프의 기존 임펠러를 가공하여 필요한 성능 조건을 만족시키는 기술이 필요하다. 따라서 본 연구에서는 펌프의 기존 회전차를 가공한 3D 모델링 형상을 적용하여 ANSYS CFX 프로그램으로 유동해석을 수행하였다. 유동해석 결과와 MATLAB 프로그램의 Curve Fitting Toolbox를 활용하여 수치 해석적으로 분석하여 회전차 외경수정 이론식을 검증하였다.

음압격리병실에서의 병실 문의 개폐속도에 따른 실간 압력변동 및 공기교환량에 대한 해석적 연구 (A Numerical Study on Pressure Fluctuation and Air Exchange Volume of Door Opening and Closing Speeds in Negative Pressure Isolation Room)

  • 김준영;홍진관
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제24권1호
    • /
    • pp.51-58
    • /
    • 2018
  • Purpose: In this study, through the comparison of the pressure fluctuation and air exchange volume in negative isolation room according to the type of the door and door opening/closing speeds, which is one of the main factors causing the cross contamination of the negative pressure isolation room, establishes standard operating procedures to prevent cross contamination in high risk infectious diseases and isolation room design. Methods: In this study, the air flow each of the room is analyzed using ANASYS CFX CODE for flow analysis. In addition, the grid configuration of the door is constructed by applying Immersed Solid Methods. Results: The pressure fluctuation due to the opening and closing of the hinged door was very large when the moment of the hinged door opened and closed. Especially, at the moment when the door is closed, a pressure reversal phenomenon occurs in which the pressure in the isolation room is larger than the pressure in the anteroom. On the other hand, the pressure fluctuation due to the opening and closing of the sliding door appeared only when the door was closed, but the pressure reversal phenomenon not occurred at the moment when the sliding door was closed, unlike the hinged door. As the opening and closing speed of the hinged door increases, the air exchange volume is increased. However, as the opening and closing speed of the sliding door is decreased, the air exchange volume is increased. Implications: According to the results of this study, it can be concluded that the pressure fluctuation due to the opening and closing of the hinged door is greater than the pressure fluctuation due to the opening and closing of the sliding door. In addition, it can be confirmed that the pressure reversal phenomenon, which may cause to reduce the containment effect in negative pressure isolation room, is caused by the closing of the hinged door. Therefore, it is recommended to install a sliding door to maintain a stable differential pressure in the negative isolation room. Also, as the opening and closing speed of the hinged door is slower and the opening and closing speed of the sliding door is faster, the possibility of cross contamination of the room can be reduced. It is therefore necessary to establish standard operating procedures for negative isolation room for door opening and closing speeds.

해수취수시스템에 적용된 2중구조 유공관의 형태에 따른 취수효율에 대한 연구 (A Study on Inflow Rate According to Shape of Dual Structure Perforated Pipe Applied to Seawater Intake System)

  • 김수영;이승오
    • 한국산학기술학회논문지
    • /
    • 제17권6호
    • /
    • pp.721-728
    • /
    • 2016
  • 지구상에 존재하는 물의 97%는 해수로 존재한다. 따라서 해양자원을 어떻게 활용하는 가는 최근 가장 중요한 이슈 중 하나이다. 해수의 이용은 해수담수화, 원자력 발전소의 냉각수, 해양심층수 활용 등 다양한 분야로 확대되고 있다. 깨끗한 해수를 취수하기 위해 여과사를 이용한 해수취수시스템이 활발하게 사용되고 있으며 이러한 시스템에 적용되는 취수관의 경우 각 취수구 별로 균등하게 취수될 때 취수효율뿐만 아니라 여과의 효율도 높일 수 있다. 본 연구에서는 해수취수시설에 적용된 2중관 구조의 취수효율 향상 효과를 3차원 수치모의를 통해 확인하였으며 상부유공의 간격변화에 따른 구간별 취수량을 분석하였다. 그 결과 관 말단부로 갈수록 상부유공의 간격이 감소되는 경우가 전체적인 취수량은 큰 차이가 없었으나 상부유공을 통한 취수량의 구간별 표준편차가 최소로 나타났다. 또한 이 경우에 관내 흐름이 안정적이어서 취수의 효율도 향상되는 것으로 나타났다. 추후 본 연구의 결과를 바탕으로 다양한 조건 및 영향인자에 대한 민감도 분석이 수행된다면 개별 환경에 적합한 최적설계안을 도출하는데 활용될 수 있을 것이라고 생각한다.

파이로프로세스 전해제련장치의 열전달 해석 (Numerical Heat Transfer Analysis of die Electrowinning Cell in the Pyroprocessing)

  • 윤달성;백승우;김시형;김광락;안도희
    • 방사성폐기물학회지
    • /
    • 제7권4호
    • /
    • pp.213-218
    • /
    • 2009
  • 전해제련 공정은 악티늄족 원소를 동시에 회수하는 공정으로써, Pyroprocessing의 핵확산 저항성을 보장하는 중요한 공정이다. 공학규모의 전해제련 장치를 설계하기 위한 기본 도구를 개발하기 위해서 실험실 규모의 장치에 대한 열전달 해석을 수행하였다. 열전달 해석을 수치 해석적으로 계산하기 위해 ANSYS CXF 상용 코드를 사용하였다. 열전달 해석 결과, 가열부의 길이가 수직으로 용융염의 높이보다 약3배 이상이 되었을 때, 용융염의 온도를 일정하게 유지할 수 있었으며, 냉각부의 길이는 그 영향이 미비하였다. 전해조 덮개 아래의 아르곤 가스의 온도는 냉각 판의 개수에 따라 감소하였으며, 5개 이상 설치 할 경우 $250^{\circ}C$ 이하로 유지할 수 있음을 보였다. 이러한 계산 결과는 실제 실험 장치에서 측정된 장치 내부 온도 분포와 경향성이 일치하는 것을 볼 수 있었다. 본 연구에서 해석 된 전해제련 장치의 열 분포 특성은 공학규모 장치의 설계를 위해 중요한 자료로 사용 될 수 있을 것이다.

  • PDF

공기부상 FPD 이송장치에서 다공질판과 글래스 사이의 공기유동 해석 (Air Fluid Analysis between Porous PE-Plate and Glass in Air-Floating FPD Conveyor System)

  • 노태정;손태영
    • 한국산학기술학회논문지
    • /
    • 제9권4호
    • /
    • pp.878-885
    • /
    • 2008
  • 최근에 많은 수요와 각광을 받고 있는 디스플레이 장치에서 CRT는 곡면이며 무겁고 큰 부피 때문에 LCD, PDP, OLED와 같은 평판디스플레이(FPD)로 대체되고 있다. FPD는 $0.6\sim0.8mm$ 두께의 대면적 글래스에 여러 공정을 거친 후에 최종 제품 규격으로 절단하여 제작하기 때문에 글래스의 면적이 크면 클수록 FPD의 생산성이 높다는 밀접한 관계를 갖는다. 따라서 FPD 제조 업계에서는 글래스 면적을 증가시키기 위하여 노력하고 있으며, 예를 들면, 현재 8세대 LCD인 경우 약 $2,200mm\times2,600mm$의 면적을 가진다. 이러한 글래스를 이송하는 대표적인 장치로서 공기부상 컨베어시스템은 압축공기를 이용해서 FPD용 대면적 글래스 등을 약 $0.3\sim0.5mm$ 정도 부상시켜 비접촉으로 이송할 수 있는 장치이다. 이 때 글래스와 다공질판 표면 사이의 공기 유동이 모델링되고 해석되며, 이것으로부터 글래스의 공기부양 조건이 예측될 수 있다. 글래스를 이송시 전기공급 중단에 의하여 압축공기가 공급되지 않아 부상판과 접촉이 발생하였을 때, 자기윤활 특성을 가진 다공질판 위의 글래스는 1mm 홀을 많이 가진 사각덕트 부상판 위의 글래스와 조사, 비교된다.

컴퓨터 CPU 냉각용 방열기 튜브 삽입길이에 따른 열유동 해석 (A Numerical Study of the Effects of Heat Transfer and Fluid Flow on Tube Insertion Length in Computer-Cooling Radiators)

  • 최진태;권오경;윤재호;김용찬
    • 대한기계학회논문집B
    • /
    • 제35권2호
    • /
    • pp.145-152
    • /
    • 2011
  • 컴퓨터용 방열기의 헤더부 튜브 삽입길이에 따른 열전달 및 유동특성을 파악하기 위하여 수치해석을 수행하였다. 튜브삽입길이 0, 5, 10mm의 3가지 해석모델을 선정하였으며 해석결과의 타당성 검증을 위해 삽입길이가 5mm 일 때 샘플을 실험결과와 비교하였다. 유량분배의 균일성을 판단하기 위해 각 튜브에서 유량비를 분석하였고, 유량분배 특성을 정량적으로 비교하기 위하여 유량균일도를 정의하였다. 해석결과를 통하여 모든 샘플에서 열전달량과 압력강하는 질량유량이 증가함에 따라 점차 증가하였으며, 튜브삽입길이가 10mm(h/D=0.5)인 샘플 3의 열전달량과 압력강하는 가장 크게 나타났다. 유량균일도(Stotal )를 조사하였을 때 튜브삽입길이가 0mm(h/D=0)인 샘플 1이 0.0052로 가장 균일한 유량분포를 보였다.

CFD를 이용한 소형 2단 터보블로워의 공력해석 (Aerodynamic Characteristics Analysis of Small Two-Stage Turbo Blower Using CFD)

  • 서승재;류민형;조이상;조진수
    • 한국항공우주학회지
    • /
    • 제42권4호
    • /
    • pp.326-335
    • /
    • 2014
  • 터보블로워는 상대적으로 적은 체적유량에서 높은 압력이 요구되는 곳에 사용되는 대표적인 유체기계로서 다양한 산업에 응용되어 사용된다. 본 연구에서는 고속으로 회전하는 소형 2단 터보블로워의 정압상승 메커니즘을 이해하기위해, 1단 임펠러 영역과 터보블로워 전체 영역에 대해서 상용툴인 ANSYS 14.5를 이용하여 CFD해석을 수행하였다. CFD 해석과정에는 역압력 구배에 의한 유동박리 예측에 적합한 k-${\omega}$ SST 난류 모델을 적용하였다. 터보블로워의 전산해석 결과는 KS B 6311 및 KS A 0612에 따른 성능시험방법을 통하여 해석기법이 타당함을 검증하였다. CFD 해석결과 터보블로워의 압력상승은 선형적으로 나타나지 않으며, 안내깃에서의 손실과 케이싱과 임펠러 간극에서 손실이 발생하는 것으로 분석되었다. 소형 2단 터보블로워를 공력성능을 예측하기 위해서는 전체 유동영역에 대한 전산 해석이 필요하며, 실험과 전산해석의 오차에 대해 고려된 전산해석 결과가 선정되어야 한다.

HIGH HEAT FLUX TEST WITH HIP BONDED 35X35X3 BE/CU MOCKUPS FOR THE ITER BLANKET FIRST WALL

  • Lee, Dong-Won;Bae, Young-Dug;Kim, Suk-Kwon;Jung, Hyun-Kyu;Park, Jeong-Yong;Jeong, Yong-Hwan;Choi, Byung-Kwon;Kim, Byoung-Yoon
    • Nuclear Engineering and Technology
    • /
    • 제42권6호
    • /
    • pp.662-669
    • /
    • 2010
  • To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.

공기흐름 변경으로 임펠러의 수명연장과 전력비 절감을 위한 송풍기 개발을 위한 수치해석 (Numerical Analysis for the Development of a Blower to Extend the Life of the Impeller and Reduce Power Costs by Changing the Air Flow)

  • 김일겸;박우철;손상석;김용남
    • 한국산학기술학회논문지
    • /
    • 제21권12호
    • /
    • pp.192-199
    • /
    • 2020
  • 본 연구는 요구되는 전압효율이 83% 이상인 풍량 10,000 ㎥/min급의 장수명 송풍기를 개발하기 위하여 송풍기 침식 현상을 조사하고, 수치해석을 통하여 송풍기 성능과 송풍기 침식을 예측하였다. 송풍기 해석에 주로 많이 사용되는 검증된 상용코드인 ANSYS CFX 13.0을 사용하여 수치해석을 수행하였다. 수치해석에 사용된 조건은 풍량 16,200 ㎥/min, 회전수 893 rpm, 온도 330 ℃이다. 분진의 비중은 3.15이고, 입도는 90㎛~212㎛이며, 양은 265kg/min으로 하였다. 송풍기로 유입되는 분진으로 인한 송풍기의 침식현상을 정확히 해석하기 위하여 수직복원계수의 변화에 따른 침식 현상을 실제 침식현상과 비교하였다. Finne 모델을 적용하여 수치해석을 수행한 결과 평형복원계수는 1, 수직복원계수는 0.1인 경우가 실제 침식현상과 유사하게 나타났다. Duct deflector가 침식에 관하여 미치는 영향을 살펴보기 위하여 Duct deflector가 있는 모델과 없는 모델을 비교하여 침식해석을 수행하였다. 수치해석의 결과, Duct deflector를 설치한 경우 Impeller에서 평균 167% 감소하고, Boss에서는 평균 133% 증가하는 경향으로 나타났다. Dust deflector의 길이에 따라 총 5가지 모델을 생성하고, 이에 대하여 침식 수치해석을 수행하였으며, 길이가 가장 긴 Case 5가 침식성능이 가장 우수한 것으로 나타났다. Case 5의 송풍기 성능은 회전수 880 rpm, 풍량 16,200 ㎥/min일 경우, 전압 691.7 mmAq와 전압효율 83.3%로 나타났다.