• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.457-464
• /
• 2009

The now velocity distribution at inlet of diesel Particulate filter (DPF) which is connected to each curved duct was simulated using $STAR-CD^{(R)}$. Three kinds of models which describe the shapes of the curved duct ware used for the CFD simulation. The simulation results were compared with the experimental data of velocity distribution which was obtained using a Pitot tube and 2-D positioning machine. At the $90^{\circ}$ curved connecting condition, the CFD simulation results of flow velocity distribution at inlet of the DPF showed a horse hoop shape shifted from the axial center line of the DPF. The CFD simulation results agree reasonably with those of the experiments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.295-302
• /
• 2006

In this study, computational structural dynamic analyses of a gyrocopter have been conducted considering unsteady dynamic hub-loads due to rotating blades. 3D CATIA models with detailed mechanical parts we constructed and virtually assembled into the complete aircraft configuration. The dynamic loading generated by rotating blades in the forward flight condition are calculated by a commercial computational fluid dynamics (CFD) code such as FLUENT. Modal based transient and frequency response analyses are used to efficiently investigate vibration characteristics of the gyrocopter. Free vibration analysis results for different fuel and pilot conditions, frequency responses and transient responses for critical flight conditions are also presented in detail.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.8
• /
• pp.641-648
• /
• 2016

In this study, the effect of injection nozzle shape on the supersonic film cooling performance is analyzed using CFD. The design parameters are inside and outside angles of upper plate of nozzle and nozzle tip thickness. It is observed that the mass flow rate of film cooling decreases with increase of inside angle, while the effect of the change of mass flow rate on the film cooling effectiveness is relatively small. In addition, cooling performance is generally reduced, except ahead of the local region where shock wave interaction with film cooling occurs, in accordance with the growth of the outside angle and tip thickness. In this paper, the CFD simulation is performed using a commercial software, ANSYS Fluent V15.0, and the CFD model is validated by comparing it with the experimental data shown in preceding research.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.194-201
• /
• 2017

The KARI-11-180 airfoil was selected as a model for EFD-CFD comparison workshop case 1. Wind tunnel test for this model was conducted in KARI low speed wind tunnel with $0.6m{\times}3.0m$ model for the Reynolds number up to 3.0E6. The model configuration and wind tunnel test results including Cl, Cd and Cp were released at the KSAS 2015 spring conference. The computational analysis results with KFLOW, FLUENT and STAR-CCM+ were present in the KSAS 2015 fall conference. These computational works were summarized in this paper and the comparison results with each others including the wind tunnel data were also summarized.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.615-624
• /
• 2014

The fin-tube heat exchanger being used for industrial boiler, radiator, refrigerator has been conducted in various studies to improve it's performance. In this study, the characteristics of heat transfer and pressure drop was theoretically analyzed according to longitudinal pitch, location of vortex generator, bump phase and number of the tube surface about the plain fin-tube heat exchanger. The boundary condition for the CFD (Computational Fluid Dynamics) analysis applied with the SST (Shear Stress Transport) turbulence model assumed as the tube surface temperature of 333 K, the inlet air temperature of 423-438 K and the inlet air velocity of 1.5~2.1 m/s. The analysis results indicated that the heat transfer coefficient is not affected highly by the longitudinal pitch, and the heat transfer characteristics was more favorable when the vortex generator was located in front of the tube. Also the bump phase of the tube surface indicated that circle type was more appropriate than serrated type and triangle type in the characteristics of heat transfer and pressure drop, and the sixteen's bump phase of circle type was most favorable.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.353-362
• /
• 2000

Minimization of hemolysis is one of the key factors for successful axial flow blood pumps. It is, however, difficult to estimate the hemolytic performance of axial flow blood pumps without experiments. Instead, the Computational Fluid Dynamics(CFD) analysis enables the prediction of hemolysis. Three-dimensional fluid dynamics of axial flow pumps with different impellers were analyzed using the CFD software, FLOTRAN. The turbulence model k-$\varepsilon$ was used. The changes in turbulent kinetic energy applied to each particle (red blood cell) flowing through the pumps were computed and displayed by the particle trace method (particle spacing of 10 msec). Also, the Reynolds shear stress was calculated from the turbulent kinetic energy. The shear stress was higher behind the impellers than elsewhere. The CFD analysis could predict in vitro results of hemolysis and also the areas where hemolysis occurred. The CFD analysis was found to be a useful tool for designing less hemolytic rotary blood pumps.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.281-281
• /
• 2019

수리모형실험은 수로 내에서 장시간 파랑을 발생시킬 경우, 수로 내에 반사 파랑의 성분이 누적될 수 있어 상당한 계측 오차를 발생시킬 우려가 있어 수리모형실험 결과의 검증이 필요하다. 일반적으로 수리모형실험 결과의 검증을 위해서는 동일 실험을 무수히 반복하여 불확실성을 제거하거나 다양한 수리실험실에서 수리모형실험을 수행하고 결과를 분석하여 불확실성을 제거할 수 있다. 그러나 이는 엄청난 시간과 노력은 물론 막대한 실험비용이 소요되기 때문에 경제적으로 효용성이 매우 낮아 현실적으로 수행이 어렵다. 이에 비해 수치모형실험은 상대적으로 저렴한 비용으로 수행할 수 있으며, 다수의 실험을 수행하지 않아도 불확실성을 제거할 수 있어 수리모형실험의 검증에 효율적이다. 일반적으로 난류 거동을 동반하는 복잡한 구조물 주변의 흐름 해석에는 3차원 CFD 모형이 필요하다. 특히, 병렬연산이 가능한 CFD 모형을 활용하면 수리모형실험에서도 재현이 쉽지 않은 다양한 조건에 따른 복잡한 흐름을 해석할 수 있어 효용성이 점점 증가하고 있다. 그러나 복잡한 구조물이 존재하게 되면 구조물에 재현에 막대한 격자구조가 필요하여 현실적으로 적용이 쉽지 않다. 이에 대한 대안으로 복잡한 구조물을 비교적 큰 격자에서 재현할 수 있는 가상경계법을 활용하는 연구가 활발히 진행되고 있다. 가상경계법은 Navier-Stokes 방정식에서 유체 내에 존재하는 고체를 모멘텀 이론으로 대체하여 고려하는 기법으로 수치모델링 수행 시 매질을 유체만으로 구성할 수 있어 안정적으로 적용할 수 있는 것으로 알려져 있다. 본 과업에서는 다양한 분야에서 널리 활용되고 있는 3차원 CFD 모형인 OpenFOAM®기반으로 파랑해석에 필요한 경계조건을 계산할 수 있는 olaFlow를 활용하여 복잡한 구조물을 지나는 파랑해석을 수행하기 위해 가상경계법을 olaFlow에 도입한 수치 알고리즘을 개발하였다. 개발한 수치알고리즘을 활용하여 복잡한 구조를 수치모델에서 재현하였으며, 수치모델에 적용된 수치 알고리즘의 안정성에 대해 고찰하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.1
• /
• pp.1-9
• /
• 2021

In the present study, the model-scale Propeller Open Water (POW) tests for the propeller of 176K bulk carrier and 8600TEU container ship were conducted through Computational Fluid Dynamics (CFD) simulation. In order to solve the incompressible viscous flow field, the Reynolds-averaged Navier-Stokes (RaNS) equations were employed as the governing equations. The γ-Reθ(gamma-Re-theta) transition model combined with the SST k-ωturbulence model was introduced to describe the laminar-turbulence transition considering the low Reynolds number of model-scale. Firstly, the flow simulation developing over a flat plate was performed to verify the transition modeling, in which the wall shear stresses were compared with experiments and other numerical results. Then, to investigate the effect of the model, the CFD simulation for the POW test was performed and the simulated propeller performance was validated through comparison with the experiment conducted at Korea Research Institute of Ships & Ocean Engineering (KRISO).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.489-498
• /
• 2019

The airloads and structural loads of Light Civil Helicopter (LCH) rotor are investigated using a loose CFD/CSD coupling. The structural dynamics model for LCH 5-bladed rotor cwith elastomeric bearing and inter-bladed damper is constructed using CAMRAD-II. Either isolated rotor or rotor-fuselage model is used to identify the effect of the fuselage on the aeromechanics behavior at a cruise speed of 0.28. The fuselage effect is shown to be marginal on the aeromechanics predictions of LCH rotor, though the effect can be non-negligible for the tail structure due to the prevailing root vortices strengthened by the fuselage upwash. A lifting-line based comprehensive analysis is also conducted to verify the CFD/CSD coupled analysis. The comparison study shows that the comprehensive analysis predictions are generally in good agreements with CFD/CSD coupled results. However, the predicted comprehensive analysis results underestimate peak-to-peak values of blade section airloads and elastic motions due to the limitation of unsteady aerodynamic predictions. Particularly, significant discrepancies appear in the structural loads with apparent phase differences.

• Membrane Journal
• /
• v.20 no.1
• /
• pp.29-39
• /
• 2010

This study focuses on the modeling of DMFC to predict the characteristics and to improve its performance. This modeling requires deep understanding of the design and operating parameters that influence on the cell potential. Furthermore, the knowledge with reference to electrochemistry, transport phenomena and fluid dynamics should be employed for the duration of mathematical description of the given process. Considering the fact that MEA is the nucleus of DMFC, special attention was made to the development of mathematical model of MEA. Multiscale modeling is comprised of process modeling as well as a computational fluid dynamics (CFD) modeling. The CFD packages and process simulation tools are used in simulating the steady-state process. The process simulation tool calculates theelectrochemical kinetics as well as the change of fractions, and at the same time, CFD calculates various balance equations. The integrated simulation with multiscal modeling explains experimental observations of transparent DMFC.