• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.313-316
• /
• 2011

This paper investigates CFD investigation on single phase supersonic nozzle flow and 2-phase subson ic flow prior to rocket nozzle supersonic 2-phase flow with water injection within the flame deflector. Numerical results of supersonic nozzle single phase flow showed no notable unrealistic behavior as it captures the usual shock cell structures. Three-dimensional 2-phase flow analysis has also been performed to verify whether the approach can grab the droplet behavior during cooling by water injection. It is expected these basic studies will enhance the cooling problem analysis of supersonic 2-phase rocket plume in the future.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.79-83
• /
• 2008

An approach to CFD code validation is developed that gives proper consideration to experimental and simulation uncertainties. The comparison errors include the difference between the data, simulation values and represents the combination of all errors. The uncertainties of modeling and numerical analysis in the CFD prediction were estimated by a Coleman's theory. In this paper, the numerical solutions are calculated by A-type standard uncertainty and Richardson extrapolation Method.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.79-83
• /
• 2008

An approach to CFD code validation is developed that gives proper consideration to experimental and simulation uncertainties. The comparison errors include the difference between the data, simulation values and represents the combination of all errors. The uncertainties of modeling and numerical analysis in the CFD prediction were estimated by a Coleman's theory. In this paper, the numerical solutions are calculated by A-type standard uncertainty and Richardson extrapolation Method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.243-246
• /
• 2012

A new multi inner stage(MIS) cyclone was designed to remove the acidic gas and minute particles of harmful materials produced from electronic industry. To characterize gas flow in MIS cyclone, pressure and velocity distribution were calculated by means of computational fluid dynamics(CFD) commercial program. Also, the flow locus of particles and particle removal efficiency were analyzed by Lagrangian method. When outlet pressure condition was -1,000 Pa, the efficiency was the best in this study. Based on the CFD simulation result, the pressure loss and destruction removal efficiency was measured through MIS cyclone experiment.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.101-105
• /
• 2016

Prandtl's Lifting-line theory is the classical theory of calculating aerodynamic properties. Though it is classical method, it predicts the aerodynamic properties well. By lifting-line theory, high aspect ratio is critical factor to decrease induced drag. And 'elliptic-similar' wing also makes the minimum induced drag. But due to the problem of manufacturing, tapered wing is preferred and have been utilized. In this Paper, by using Edison CFD, verifying the classical lifting-line theory. To consider induced drag only, using Euler equation as governing equation instead of full Navier-Stokes equation. Refer to the theory, optimum taper ratio which makes the minimum induced drag is 0.3. Utilizing the CFD results, plotting oswald factor over various taper ratio and investigating whether the consequences are valid or not. As a result, solving Euler equation by EDISON CFD cannot guarantee the theoretical values because it is hard to set the proper grid to solve. Results are divided into two cases. One is the values are decreased gradually and another seems to following tendency, but values are all negative number.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.466-473
• /
• 2011

The buoyancy and initial momentum fluxes make near-field dominated by buoyant jet when thermal discharge releases underwater. In order to estimate prediction capabilities of those near-field phenomena, non-hydrostatic RANS applied CFD(Computational Fluid Dynamic) model was used. Condition of model was composed based on past laboratory experiments. Numerical simulations carried out for the horizontal buoyant jet in the stagnant flow and vertical buoyant jet into crossflow. The results of simulation are compared with the terms of trajectory and dilution rate of laboratory experiments and analytic model(CorJET) results. CFD model showed a good agreement with them. CFD model can be appropriate for assessment of submerged thermal discharge effect because CFD model can resolve the limitations of near-field analytic model and far-field quasi 3D hydrodynamic model. The accuracy and capability of the CFD model is reviewed in this study. If the computational efficiency get improved, CFD model can be widely applied for simulation of transport and diffusion of submerged thermal discharge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.473-473
• /
• 2021

새만금 유역의 하류 평야지대는 농업 관개 및 배수가 제수문의 영향을 받고 있으며, 상류 축산밀집시설에 따라 농업 비점오염원 유입이 수계 환경오염에 미치는 영향을 평가하는 것이 필요하다. 본 연구에서는 새만금 유역의 하류 제수문을 대상으로 유역 모형과 전산유체역학 모형을 이용하여 유입, 유출 그리고 오염원 등의 영향을 분석하고자 한다. SWAT (Soil and water assessment tool)은 유역 모형으로 수문순환 및 비점오염원을 모의하기 위해 개발한 모형이다. CFD(Computational fluid dynamics)는 구조물을 설계하고 유체, 기체 등의 역학을 모의할 수 있다. SWAT 모형을 이용하여 농촌 소유역을 대상으로 하류 제수문 위치를 출구로 지정하여 수문을 모의하고 그 결과자료는 CFD에 입력할 수 있다. CFD는 하류 제수문 구조물을 설계하고 SWAT 모형의 수문자료를 입력하여 제수문의 유입 및 유출 영향을 평가할 수 있다. SWAT 모형 구축을 위해 2015-2018년까지 기상, 수위, 유량 관측자료를 수집하였으며, 보정기간과 검증기간은 각 2년이며, 모형 성능 검증에 사용한 적합성 평가 지수는 R² (Determine coefficient), RMSE (Root mean square error), 그리고 NSE (Nash-sutcliffe efficiency coefficient)를 사용하였다. 모형의 보정은 SWAT-CUP 자동보정프로그램을 사용하였으며, 모형의 보정지수는 NSE를 사용하였고, 1,000회 반복 수행을 통해 매개변수를 최적화하였다. CFD 모형은 제수문의 실제 규격을 바탕으로 동일한 구조를 고려하였으며, 수문조작을 고려하여 유입 및 유출을 모의하였다. 본 연구는 유역차원과 구조물 차원의 모델링을 연계하는 것으로 최근 기후변화에 따라 급격히 변화하는 유역환경에 대처할 수 있는 방안이 될 수 있을 것이며, 제수문 시설을 관리하는 기관에서도 합리적인 운영방안에 대한 기초자료로 기여할 수 있을 것으로 사료된다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.84-84
• /
• 2011

터널화재의 위험요소에 대한 해석을 위해서는 실제 상황을 재현한 실대형 실험이 가장 유용하겠지만 현실적으로 시간적, 공간적, 경제적인 제약이 따르기 때문에 CFD Modeling 기술의 이용 및 검증이 필요하고, 실제 상황에 가까운 현상의 재현을 위해서는 시뮬레이션의 정확도에 대한 향상이 필수적이다. 또한, CFD Modeling을 터널화재에 적용할 때 시뮬레이션의 질에 영향을 미칠 수 있는 요소들에 대한 결정이 선행되어야 한다. 우선, 터널의 기하학적 구조와 경계조건의 확립이 필요한데 필요한 정보를 얻기 위해서 어느정도 길이의 터널이 적절한지에 대해 생각할 필요가 있으며, 단면변화에 대한 결정을 통해 모델링을 수행하여야 한다. 모델링 작업이 선행된 후에 화재의 위치, 성장률, 최대 크기, 환기시스템 사항 등의 고려가 필요한데 이러한 조건들은 CFD Modeling의 결과에 직접적인 영향을 주기 때문에 충분한 사전조사가 이루어져야 하고, 각 사항들의 변수를 고려하여 다양한 화재시나리오의 도출이 가능할 수 있다. 마지막으로, 화재에서 발생된 열중 약 30%가 복사에 의해 주위 벽으로 전달될 수 있고 열은 연기가 가득찬 영역내에서 재분배될 수 있는데, 열전달 및 연기의 유동 등에 관한 자료를 기초로 화재현상에 대한 분석이 가능하다. 이러한 과정들을 통해 실제 상황에 가까운 설계화재 시나리오를 예측할 수 있다. 본 연구에서는 우리나라 최장대터널인 죽령터널에 대해 합리적인 가정을 통한 설계화재 시나리오를 기초로 화재시뮬레이션은 FDS(Fire Dynamics Simulator) 프로그램을 사용하여 화재 및 연기의 이동 양상을 분석하고, 피난시뮬레이션은 SIMULEX 프로그램을 사용하여 피난시간을 예측 함으로써 터널화재의 CFD Modeling에 의한 피난안전성을 검토하고자 한다.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.630-638
• /
• 2009

A computational fluid dynamics(CFD) model is developed and validated with on-site experiments for a urea-based SNCR(selective non-catalytic reduction) process to reduce the nitrogen oxides($NO_x$) in a municipal incinerator. The three-dimensional turbulent reacting flow CFD model having a seven global reaction mechanism under the condition of low CO concentration and 12% excess air and droplet evaporation is used for fluid dynamics simulation of the SNCR process installed in the incinerator. In this SNCR process, urea solution and atomizing air were injected into the secondary combustor, using one front nozzle and two side nozzles. The exit temperature($980^{\circ}C$) of simulation has the same value as in situ experiment one. The $NO_x$ reduction efficiencies of 57% and 59% are obtained from the experiment and CFD simulation, respectively at NSR=1.8(normalized stoichiometric ratio) for the equal flow rate ratio from the three nozzles. It is observed in the CFD simulations with varying the flowrate ratio of the three nozzles that the injection of a two times larger front nozzle flowrate than the side nozzle flowrate produces 8% higher $NO_x$ reduction efficiency than the injection of the equal ratio flowrate in each nozzle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.199-208
• /
• 2019

Regular waves were generated in a wave flume under perfect reflection condition to evaluate performance of three CFD models of CADMAS-SURF, olaFlow, and KIOSTFOAM. The experiments and numerical simulations were carried out for three different conditions of non-breaking, breaking of standing waves, and breaking of incident waves. Among the three CFD models, KIOSTFOAM showed best performance in reproducing the experimental results. Although the run time was reduced by using CADMAS-SURF, its computational accuracy was worse than KIOSTFOAM. olaFlow was the fastest model, but active wave absorption at the wave generation boundary was not satisfactory. In addition, the model excessively dissipated wave energy when wave breaking occurred.