• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.3
• /
• pp.37-46
• /
• 2012

In RADAR and SONAR detection systems, noise environment can be classified into homogeneous and heterogeneous environment. Especially heterogeneous environments are modelled as target masking and clutter edge. Since the variability-index (VI) CFAR, a composed CFAR algorithm, dynamically selects one of the mean-level algorithms based on the VI and the MR (mean ratio) test, it is robust to various environments. However, the VI CFAR still suffers from lowered detection probabilities in heterogeneous environments. To overcome these problems, we propose an improved VI CFAR processor where TM (trimmed mean) CFAR and a sub-windowing technique are introduced to minimize the degradation of the detection probabilities appeared in heterogeneous environments. Computer simulation results show that the proposed method has the better performance in terms of detection probability and false alarm probability compared to the VI CFAR and single CFAR algorithms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.164-169
• /
• 2010

Since the range and Doppler resolution of the synthetic aperture radar(SAR) image becomes very high, the target detection accuracy can be significantly increased, but the computational burden is also increased. The conventional single-cell based CFAR detector performs the target detection on every single cell basis, thus it causes the serious increment of the computational load. In this paper, the improved two-step MCA-CFAR detector is proposed for the improvement of the target detection as well as the reduction of computational load: the first step is to use the MCA-CFAR, and the second step is to use the single-cell based CFAR detection in the expected target area for final decision. The performance of the proposed algorithm is compared with the conventional single-cell based CFAR and MCA-CFAR on SAR images.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.549-552
• /
• 2000

본 논문에서는 주파수 영역 배열안테나의 계산량을 감소시키기 위한 센서링 부분적응 알고리듬을 제안한다. 제안한 알고리듬은 입력신호를 주파수 영역으로 변환한 후 CFAR(constant false alarm rate) 검파기법을 이용하여 간섭신호가 존재하는 주파수 대역을 찾아내고 이에 해당하는 가중치에 대해서만 적응 신호처리를 수행한다. 이때 CFAR 검파기의 오경보율은 출력신호의 전력 변화량을 이용하여 환경에 맞게 적응적으로 변화시켜서 최적 값으로 설정한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.456-463
• /
• 2021

In this paper, Ultra Wide-Band(UWB) radar sensor is employed to detect flying drones and avoid collision in dense clutter environments. UWB signal is preferred when high resolution range measurement is required for moving targets. However, the time varying motion of flying drones may increase clutter noises in return signals and deteriorates the target detection performance, which lead to the performance degradation of anti-collision radars. We adopt a dynamic clutter suppression algorithm to estimate the time-varying distances to the moving drones with enhanced accuracy. A modified Constant False Alarm Rate(CFAR) is developed using an adaptive filter algorithm to suppress clutter while the false detection performance is well maintained. For this purpose, a velocity dependent CFAR algorithm is implemented to eliminate the clutter noise against dynamic target motions. Experiments are performed against flying drones having arbitrary trajectories to verify the performance improvement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.791-798
• /
• 2018

The CFAR algorithm is mainly used for target detection in radar systems. In particular, OS CFAR is used in a non-uniform noise environment. However, it requires a large amount of computation, because it should sort reference cells in ascending order. This makes it difficult to apply the radar system in real time. In this paper, we describe how to reduce the computational burden of OS CFAR. We compared the power of the test cell and reference cell to determine only the presence or absence of target detection. The common reference cells overlapping in the reference cells of the three test cells are obtained. We first compare the test cell with the highest power value among the three test cells to the common reference cells. Next, we compare each test cell to general reference cells, excluding the common reference cells. The computation time is shortened by reducing the power comparison computation amounts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.853-864
• /
• 2017

This paper proposes a false alarm rate reduction technique for detection of small targets in a terrestrial environment. CFAR algorithm is useful in homogeneous background, but it is not easy to detect targets in non-homogeneous background. In particular, when the clutter power is not significantly different from the target signal, it is difficult to detect the target due to high false alarm rate. To solve these difficulties, this study presents the false alarm rate reduction technique based on CFAR algorithm, matched filter and binary integration technique. The parameters are studied through the theoretical analysis and the validity of the proposed study is examined by the test results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1045-1059
• /
• 2011

A 3-D multi-function radar(MFR) is a modern radar to provide various target information, such as range, doppler, and angle by performing surveillance, multiple target tracking, and missile guidance. In this paper, we introduced a real-time radar signal processor(RSP), which is a crucial component of MFR with its design, implementation using high-speed multiple DSP, and performance. Additionally, we verified that several advanced signal processing algorithms were well-performed in our RSP, such as MCA-CFAR algorithm for target detection in clutter environment, range and velocity measurement algorithm using discriminator estimation, and noise jammer detection algorithm using local minimum selection.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.229-237
• /
• 2004

In this paper, the design method and algorithms of the signal processor for a multipurpose radar system are analyzed. The signal processor, operating at the two modes-collision avoidance mode and weather mode, has 4 steps of ADC, NCI, STC, CFAR. Several algorithms of NCI and CFAR are analyzed and the optimal design is proposed to the system. CVI and CMLD algorithm have good performance in decreasing the false alarm rate and increasing detection probability, Regarding processor computational capacity, K=12 for CVI, M=16~20, Ko=M-4 for CMLD is suggested. CVI processing needs much time, two or more processors need to be allocated to CVI. So, for the system with four processors, two processors should be allocated to VID of NCI with ADC input and CFAR with STC, and two processors are should be allocated to CVI.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.67-73
• /
• 2020

The clustering algorithm is the grouping of similar objects. In radar system, it is mainly used to group adjacent hits using the CFAR algorithm results. However it is difficult to separate adjacent targets by a general clustering method. In this paper, we describe how to separate adjacent targets using double clustering method. First, we execute a range direction clustering. And we find the inflection point and separate it. Next, we execute a doppler direction clustering using range clustering results. This method makes the computation time less change even if the target increases by range-doppler clustering respectively.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.5
• /
• pp.380-388
• /
• 2004

This study proposed an improved spike detection algorithm which automatically detects suitable spike threshold on the amplitude of surface electromyography(SEMG) signal during isometric contraction. The EMG data from the low back muscles was obtained in six channels and the proposed signal processing algorithm is compared with the median frequency and Gabriel's spike parameter. As a result, the reliability of spike parameter was inferior to the median frequency. This fact indicates that a spike parameter is inadequate for analysis of multi-channel EMG signal. Because of uncertainty of fixed spike threshold, the improved spike detection algorithm was proposed. It automatically detects suitable spike threshold depending on the amplitude of the EMG signal, and the proposed algorithm was able to detect optimal threshold based on mCFAR(modified Constant False Alarm Rate) in the every EMG channel. In conclusion, from the reliability points of view, neither median frequency nor existing spike detection algorithm was superior to the proposed method.