• 한국토양비료학회지
• /
• 제33권4호
• /
• pp.234-241
• /
• 2000

현재 친환경농업을 위한 하나의 대체농법으로 인식되고 있는 유기농업실천 농가포장을 대상으로, 시설재배지 36곳, 논 10곳, 과수원 8곳을 전국에서 선발 표층토내 인산의 분포특성과 주요 화학적 특성을 조사하여 다음과 같은 결과를 얻었다. 유기농업포장의 화학성중 평균 유기물함량은 시설재배지 $44g\;kg^{-1}$, 논 $26g\;kg^{-1}$, 과수원 $39g\;kg^{-1}$으로 국내 90년대 농지내 평균 유기물 함량에 비해 높게 분포하였다. 유효인산 함량은 시설재배지 $986mg\;kg^{-1}$ 과수원 $754mg\;kg^{-1}$, 전인산은 각각 2973과 $2303mg\;kg^{-1}$으로 과량의 인산이 축적되고 있었다. 이는 유기농업실천 농가에서 질소와 인의 비율(N/Pratio)이 낮은 축분을 비옥도 관리에 주로 이용하기 때문으로 해석되었다. 시설재배지와 과수원 토양에서는 전인산(T-P)의 62~80%로 무기태 인(Inorganic-P) 형태로 존재하여 가장 높은 비율로 차지하였으며, 논토양에서는 Residual-P가 전인산의 50%로 가장 높은 비율을 차지하였다. 인산분획특성(P Fractionation)중 시설재배지와 과수원 토양내에서는 Ca-P가 약 $1,330mg\;kg^{-1}$으로 Extractable P 중 가장 높은 비율을 점하고 있었으며, 이는 두 토양의 높은 pH 영향으로 해석되었다. 반면 논토양내에서는 Fe-P가 Extractable P의 대부분을 차지하고 있어 토양의 이용특성간 분포차이가 있었다. 그리고 수용성 인산이 시설재배지 $65mg\;kg^{-1}$, 과수원 $26mg\;kg^{-1}$으로 비교적 높게 검출되었다. 결과적으로 친환경 농법으로 인식되고 있는 현재 우리의 유기농업 실천농가포장의 상당부분 인산이 과량축적되고 있으며, 이로 인한 토양환경 악화 초래 및 주변수계의 부영양화 유발가능성이 있을 것으로 예측되어 세심한 관리가 필요할 것으로 조사되었다.

• 한국통신학회논문지
• /
• 제27권12C호
• /
• pp.1288-1298
• /
• 2002

타원곡선 암호시스템을 GF(2$^{m}$ )상에서 고속으로 구현하기 위해서는 빠른 나눗셈기가 필요하다. 빠른 나눗셈 연산을 위해선 비트-패러럴 구조가 적합하나 타원곡선 암호시스템이 충분한 안전도를 가지기 위해서는 m의 크기가 최소한 163보다 커야 한다. 즉 비트-패러럴 구조는 0(m$^2$)의 면적 복잡도를 가지기 때문에 이러한 응용에는 적합하지 않다. 따라서, 본 논문에서는 CF(2$^{m}$ )상에서 표준기저 표기법을 사용하여 모듈러 나눗셈 A(x)/B(x) mod G(x)를 고속으로 수행하는 새로운 비트-시리얼 시스톨릭 나눗셈기를 제안한다. 효율적인 나눗셈기 구조를 얻기 위해, 새로운 바이너리 최대공약수(GCD) 알고리즘을 유도하고, 이로부터 자료의존 그래프를 얻은 후, 비트-시리얼 시스톨릭 나눗셈기를 설계한다. 본 논문에서 제안한 나눗셈기는 0(m)의 시간 및 면적 복잡도를 가지며, 연속된 입력 데이터에 대하여, 초기 5m-2 사이클의 지연 후, m 사이클 마다 나눗셈의 결과를 출력한다. 제안된 나눗셈기를 동일한 입출력 구조를 가지는 기존의 연구 결과들과 비교 분석한 결과 칩 면적 및 계산 지연시간 모두에 있어 상당한 개선을 보인다. 따라서 제안된 나눗셈기는 적은 하드웨어를 사용하면서 고속으로 나눗셈 연산을 수행할 수 있기 때문에 타원곡선 암호화시스템의 나눗셈 연산기로 매우 적합하다. 또한 제안한 구조는 기약 다항식(irreducible polynomial) 선택에 있어 어떤 제약도 두지 않고, 단 방향의 신호흐름을 가지면서, 매우 규칙적이기 때문에 필드 크기 m에 대해 높은 유연성 및 확장성을 제공한다.였다. an extraction system, a new optical nonlinear joint transform correlator(NJTC) is introduced to extract the hidden data from a stego image in real-time, in which optical correlation between the stego image and each of the stego keys is performed and from these correlation outputs the hidden data can be asily exacted in real-time. Especially, it is found that the SNRs of the correlation outputs in the proposed optical NJTC-based extraction system has been improved to 7㏈ on average by comparison with those of the conventional JTC system under the condition of having a nonlinear parameter less than k=0.4. This good experimental results might suggest a possibility of implementation of an opto-digital multiple information hiding and real-time extracting system. 촉각에 있는 지각신경세포가 뇌의 촉각엽으로 뻗어 들어가 위의 5가지 신경연접중 어느 형을 형성하는지를 관찰하기 위하여 좌측 촉각의

• 한국가금학회지
• /
• 제51권2호
• /
• pp.83-95
• /
• 2024

본 연구는 산란능력이 우수한 토종 산란용 실용계를 개발하기 위해 선정된 국내 토종닭 종계(YC, YD, CK, CF) 4계통을 대상으로 2원 교배를 실시하였다. 능력검정은 12개 조합의 287수를 대상으로 18주령부터 64주령까지 체중, 생존율, 초산일령, 시산일령, 산란율, 계란 품질 및 난형을 조사하였다. 분석 결과, 체중은 YCYD, YDYC 조합이 가장 무거웠으며 생존율은 CKYC, YDYC 조합이 64주령까지 94% 이상의 생존율을 보였다. 시산일령은 CFYC 조합이 127일, 초산일령은 YDCF 조합이 140일로 각각 해당하는 종계들의 성적보다 시산일령과 초산일령이 모두 빨랐다. 산란율은 52주령 이후로 대부분의 조합들이 산란율이 떨어지는양상을 보였지만 YDCF 조합은 60주령까지 70% 이상의 산란지속성을 나타내며 가장 우수한 산란율 보였다. 계란품질에서 난중은 CKCF, YCCF가 가장 무거웠고, 난각색은 토종닭 대부분의 조합들이 Hy-Line Brown에 비해 유의적으로 밝게 나타난 반면 조합들 중에서는 YCYD 및 YDYC 조합이가장 짙은 색을 나타냈다. 난각 두께는 토종닭 조합 중 YCCF 조합이 두꺼웠으며 난각 강도는 CKYC 조합이 가장 강했다. 토종닭의 난형은 CKCF 조합이 Hy-Line Brown에 비해 장축이 유의적으로 길게 나타났으며 세로가 길쭉한 모양을 나타내었다. 토종닭 교배조합들의 난황색은 Y계통이 들어간 조합에서 짙은색을 나타냈으며 난황비율또한 Hy-Line Brown에 비해 유의적으로 높았다. 종합하자면 실용계들의 능력검정을 통해 최적의 토종 산란용 실용계를 선정시 산란율이 우수한 YDCF, 계란품질이 우수하면서 상대적으로 산란율이 양호했던 YCCF 조합이 가장 바람직한 조합으로 판단된다. 또한, 추후에는 난형지수에 관한 고려 및 교배조합들의 능력을 최대로 발현하기 위한 영양소 요구량 등의 연구가 필요하다고 사료된다. 이에 지속적으로 토종닭 산란계의 계란 생산성 관련 연구를 진행하여 토종닭 계란 등급제를 확립하고 품질과 맛을 개선한다면 토종닭 산란계 농가의 소득을 향상시키고 소비자에게 프리미엄 식재료를 공급할수 있을 것으로 판단된다.

• 한국산림과학회지
• /
• 제34권1호
• /
• pp.31-46
• /
• 1977

관상수재배(觀賞樹栽培)의 현황(現況), 생산(生產), 유통과정(流通過程), 문제점(問題點), 전망(展望)과 개선방안(改善方案)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 관상수재배(觀賞樹栽培)의 일반현황(一般現況) (1) 전국(全國)(서울제외(除外))의 관상수재배면적(觀賞樹栽培面積)과 재배자수(栽培者數)는 각각 1,872.02ha, 2,717명(名)으로서 농수산부(農水產部) 집계(集計)와 많은 차이(差異)가 있는데, 이것은 재배업자(栽培業者)들이 조세부담등(租稅負擔等)의 이유(理由)때문에 정확(正確)한 답(答)을 하지 않은 것으로 보여진다. (2) 직업(職業)은 원예(園藝)(관상수포함(觀賞樹包含)), 농업(農業)을 비롯한 일차산업분야(一次產業分野)의 종사자(從事者)들이 대부분이었으며, 공무원(公務員), 회사원(會社員)도 약간 있었다. (3) 관상수재배자(觀賞樹栽培者)는 학력(學歷)이 높을수록 그 수(數)가 많은 경향(傾向)을 보였으며, 연령(年齡)은 청년층(青年層)보다 장년(壯年)에서 노년층(老年層)이 많은 분포(分布)를 보였다. (4) 관상수재배동기(觀賞樹栽培動機)는 취미(趣味)로 시작, 수익(收益)이 높아서 자산저축적(資產貯蓄的)인 취지(趣旨)에서 공한지활용등(空閑地活用等)의 순(順)으로 나타났으며 재배경력(栽培經歷)은 5~10년(年)이 가장 많고, 대체로 5~15년(年)까지의 재배경력(栽培經歷)을 가진 자가 전체(全體)의 약 $\frac{2}{3}$정도를 차지하고 있었다. (5) 관상수재배장소(觀賞樹栽培場所)는 전(田)이 반이상(半以上)이었으며 그밖에 임야(林野), 답(畓), 하천부지등(河川敷地等)의 순(順)으로 전(田)과 답(畓)을 합(合)하면 66.1%로서 전체(全體) 재배장소(栽培場所)의 2/3나 되었다. (6) 관상수(觀賞樹)의 재배면적(栽培面積)은 1,000~3,000평(坪)의 재배자수(栽培者數)가 가장 많고 그 다음이 3,000~10,000평(坪), 10,000평(坪) 이상(以上), 300~1,000평(坪), 300평미만(坪未滿)의 순(順)으로 1정보(町步)(3,000평(坪))이상(以上)의 재배자(栽培者)가 44.3%로 나타났다. 2. 관상수(觀賞樹)의 생산(生產) (1) 관상수원(觀賞樹園)의 경영형태(經營形態)는 부업(副業), 주업(主業), 겸업순(兼業順)이었으며, 경영방식(經營方式)은 기업경영(企業經營), 반자영(半自營), 자영순(自營順)으로서 관상수재배(觀賞樹栽培)에는 고용노동(雇傭勞動)을 많이 사용(使用)하는 것으로 나타났다. (2) 관상수(觀賞樹)의 재배수종(栽培樹種)은 다양한데 30종(種) 미만(未滿)의 재배자(栽培者)가 전체(全體)의 약 3/4, 30종(種) 이상(以上)의 재배자(栽培者)가 전체(全體)의 약 l/4로 나타났다. (3) 1977년(年) 3월말(月末) 현재(現在) 관상수재배자(觀賞樹栽培者)들이 재배(栽培)하고 있는, 10가지 주요관상수종(主要觀賞樹種)은 (1) 향나무류, (2) 철죽류, (3) 회양목, (4) 은행나무, (5) 단풍나무, (6)목련류, (7) 잣나무류, (8) 주목, (9) 사철나무류, (10) 히말라야시다로 나타났다. (4) 출하(出荷)가 곧 가능(可能)한 수종(樹種)은 (1) 향나무류, (2) 회양목, (3) 철죽류, (4) 단풍나무류, (5) 목련류등이었다. 3. 관상수(觀賞樹)의 유통(流通) (1) 관상수(觀賞樹)의 처분(處分)은 주(主)로 중간상인(中間商人)에게 판매(販賣)하고 있었으며, 관상수유통과정(觀賞樹流通過程)은 5가지로 나누어 볼 수 있는데 대부분 중간상인(中間商人)과 하청자(下請者)를 거치며 심지어는 3~4단계의 중간단계(中間段階)를 거치는 유통경로(流通經路)도 실재(實在)하고 있음이 밝혀졌다. 그러므로 관상수(觀賞樹) 거래가격(去來價格)이 마구 조작되고 있어 피해(被害)와 손해(損害)를 입는 것은 생산자(生產者)와 실수요자(實需要者)들이다. 따라서 생산자(生產者)를 보호육성(保護育成)하고 실수요자(實需要者)들에게 보다 싼 적정가격(適正價格)으로 관상수(觀賞樹)를 공급(供給)할 수 있는 단일유통체제(單一流通體制)의 수립(樹立)이 시급히 강구(講究)되어야 할 것이다. (2) 관상수생산자(觀賞樹生產者)들의 관상수판매가격(觀賞樹販賣價格)은 조사결과(調査結果) 입찰가격(入札價格)의 1/2~1/3, 심지어는 수종(樹種)에 따라 1/41~1/5에 불과한 예(例)도 있음이 나타났다. (3) 중간상인(中間商人)들이 얻는 중간이익(中間利益)은 20~50%정도(程度)를 얻는 사람이 대부분인 것으로 본조사결과(本調査結果) 밝혀졌다. 그러므로 관상수유통(觀賞樹流通)의 합리화(合理化)를 기(期)하기 위해서는 중간상인(中間商人)과 하청자(下請者)를 배제(排除)한 생사자(生產者)가 실수요자(實需要者)에게 직매(直賣)할 수 있는 유통경로(流通經路)의 모색(摸索)이 절실히 요청(要請)되며, 생산자(生產者)의 권리(權利)를 보장할 수 있는 방안(方案)도 아울러 검토(檢討)되어야 할 것이다. 4. 관상수(觀賞樹)에 대한 제반(諸般) 문제점(問題點) (1) 최근(最近) 대기업(大企業)에서 관상수재배(觀賞樹栽培) 진출(進出)을 하고 있는데 대해서 관상수재배자(觀賞樹栽培者)들은 (1) 과잉생산(過剩生產)의 초래(招來), (2) 농가(農家)의 부업적(副業的)인 재배(栽培)에 압박(壓迫)을 주기때문 등등의 이유(理由)로 반대의견(反對意見)이 지배적(支配的)이었는데 관계기관(關係機關)에서는 이에 대한 적절(適切)한 대응책(對應策)을 강구(講究)하지 않으면 안될 것이다. (2) 관상수(觀賞樹)의 평탄지(平坦地) 재배금지(栽培禁止)에 대한 반응(反應)은 반대(反對)한다가 지배적(支配的)인 견해(見解)로서 그 이유(理由)를 (1) 신규(新規) 재배자(栽培者)만 규제(規制)해도 법(法)의 목적(目的)이 달성(達成)된다는 것과, (2) 과거(過去)에 합법적(合法的)으로 식재(植栽)한 관상수(觀賞樹)를 무보상(無補賞)으로 옮겨 심게 하는 것은 위법(違法)이 라는 점(點)을 들고 있다. 한편 "농지(農地)의 보전(保全) 및 이용(利用)에 관한 법률(法律)"에 의하여 농수산부(農水產部)가 집계(集計)한 농지환원대상면적(農地還元對象面積)은 전(田)과 답(畓)을 합(合)하여 1,176.39ha로서 이 법(法) 시행(施行)에 앞서 관상수재배자(觀賞樹栽培者)들에 대한 대책(對策)을 강구(講究)한 후(後) 실시(實施)함이 당연(當然)한 처사(處事)요 정당(正堂)한 절차(節次)라고 생각된다. (3) 관상수(觀賞樹)의 대외수출(對外輸出)은 1970년(年) 최초로 편백, 산수유, 오동나무를 수출하기 시작하여 2~3년간 호조(好調)를 보여오다가 최근 부진(不振)현상을 겪고 있는데, 재배업자(栽培業者)들은 그 이유(理由)를 (1) 정보(情報)가 빈약(貧弱)하고 장려책(裝勵策)이 없기 때문, (2) 수입국(輸入國)의 경제불황(經濟不況), (3) 기호(嗜好)에 맞는 신수종(新樹種)의 개발(開發)이 없기 때문 등등으로 보고 있다. 그러나 관상수수출(觀賞樹輸出)은 이제 대일의존(對日依存)에서 구미제국(歐美諸國)쪽으로 돌려야 할 것이며 관상수(觀賞樹)도 새로운 양묘기술(養苗技術)과 번식기술(繁殖技術)을 요(要)하는 특이수종(特異樹種)을 개발(開發)하는 것이 관상수(觀相樹) 수출진흥방안책(輸出振興方案策)이라 생각된다. (4) 관상수(觀賞樹)를 식재(植栽)하여 수입(收入)이 있기 전(前) 을류농지세(乙類農地稅) 납부여부(納付與否)에 대한 관상수(觀賞樹) 재배업자(栽培業者)들의 반응(反應)은 납부(納付)하지 않았다가 납부(納付)하였다는 반응(反應)보다 많았다. 한편 전반적(全般的)인 관상수재배지(觀賞樹栽培地에) 대한 을류농지세액(乙類農地稅額)은 대체로 적당하다는 반응(反應)보다는 세액(稅額)이 너무 많다고 응답(應答)한 사람이 많이 있는 것으로 보아 관계기관(關係機關)에서는 을류농지세(乙類農地稅)의 과세기준(課稅基準)에 대한 재검토(再檢討)를 하여 적정과세(適正課脫)를 하여야 할 것으로 사료(思料)된다. 5. 관상수재배(觀賞樹栽培)에 대한 전망(展望) 및 개선방안(改善方案) (1) 관상수(觀賞樹)의 경기(景氣)는 짧으면 앞으로 2~3년(年), 길면 5~10년내(年內)에 좋아질 것으로 비교적 낙관적(樂觀的) 반응(反應)을 보이고 있는 반면, 앞으로 회복될 가능성이 없다고 비관적 반응(反應)을 보인 예도 약간 있었다. (2) 관상수생산전환(觀賞樹生產轉換)에 대한 반응은 현상유지, 현보유량처분후(現保有量處分後) 전환(轉換), 염가라도 정리(定理)하겠다는 순(順)이었으며, 장기적(長期的)인 안목(眼目)으로 계속 확장(擴張)하고자 한다는 반응(反應)은 그리 많지 않았다. (3) 관상수(觀賞樹)의 규격표준화(規格標準化)에 대한 반응(反應)은 찬성(贊成)한다는 반응(反應)이 지배적(支配的)이나 반대(反對)한다는 사람들도 약간 있었다. 그들은 그 이유(理由)를 (1) 동일규격(同一規格)이라도 재배기술(栽培技術)에 의한 수형상황(樹形狀況)에 따라 가격차(價格差)가 크기 때문, (2) 조림묘목(造林苗木)과 달라 규격통일(規格統一)이 어렵기 때문이라고 하였다. (4) 관상수유통과정(觀賞樹流通過程)의 정비책(整備策)으로 유통기관(流通機關)에서 계통적(系統的)으로 관상수(觀賞樹)를 판매(販賣), 처분(處分)하는데 대해서 찬성(贊成)한다는 반응(反應)이 훨씬 많았으며, 반대자들은 (1) 유통전담기관(流通專擔機關)이 독점(獨占)할 경우의 횡포와, (2) 유통전담기관(流通專擔機關)이 영리화(營利化) 되기 쉽다는 것을 우려하고 있었다. (5) 관상수(觀賞樹)의 과잉생산(過剩生產)을 방지(防止)하고 우량관상수(優良觀賞樹)를 생산(生產)하기 위한 방편으로 관상수재배(觀賞樹栽培)의 허가제(許可制) 또는 인가제(認可制)가 대두(擡頭)되고 있는데 대해서 반대(反對)한다가 찬성(贊成)한다는 반응(反應)보다 약간 높게 나타났으며, 반대이유(反對理由)로는 (1) 부업적(副業的) 관상수재배(觀賞樹栽培)가 불가능(不可能)하다는 것과, (2) 권력(權力)과 결탁한 부조리(不條理)를 초래(招來)하기 쉽다는 것을 들고 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Applied Biological Chemistry
• /
• 제17권3호
• /
• pp.149-176
• /
• 1974

팔종(八種)의 치환(置換) diphenyl ether 제초제(除草劑)를 Rayonet 광화학(光化學) 반응기(反應器)를 사용(使用)한 모조환경조건하(模造環境條件下)에서 용액상(溶液相) 광분해(光分解)시켜 그 분해산물(分解産物)에 관(關)하여 연구(硏究)하였다. 시료(試料)로 사용(使用)된 화합물(化合物)들은 300 nm에서 광화학반응(光化學反應)을 일으키기에 충분(充分)한 energy를 흡수(吸收)하였으며 분해산물(分解産物)은 tlc, glc, ir, ms, 그리고 nmr 등(等)에 의(依)하여 확인(確認)하였다. 그 결과(結果)를 요약(要約)하면 C-6989의 용액상(溶液相) 광분해(光分解) : p-nitrophenol이 다량(多量) 생성(生成)됨을 보아 ether결합(結合)의 결렬이 주반응(主反應)이며 치환기(置換基) $NO_2{\rightarrow}NH_2$의 광화학적(光化學約) 환원반응(還元反應)과 $CF_3{\rightarrow}COOH$의 산화반응(酸化反應)도 관찰되었다. p-Nitrophenol의 수중(水中) 광분해(光分解) : quinone(0.28%), hydroquinone(0.66%) 및 p-aminophenol(0.42%)과 비교적(比較的) 소량(少量)의 미지화합물(未知化合物)이 생성(生成)됨을 확인(確認)하였고 모화합물(母化化合物)은 대부분(大部分) 작용(作用)을 받지 않은 채로 존재(存在)하였다. 이들 분해산물(分解産物)의 형성기구(形成機構)는 $n{\rightarrow}{\pi}^*$ 및 여기(勵起)를 거친 nitro-nitrite재배열(再配列) 및 자유기(自由基)에 의(依)한 수소탈취(水素脫取)를 통(通)한 광환원(光還元)으로 추측(推測)되었다. Nitrofen의 용액상(溶液相) 광분해(光分解) : n-hexane중(中)에서는 $NO_2$기(基)의 광환원(光遷元)이 주반응(主反應)이었고 수용액(水溶液) 중(中)에서는 광환원(光遷元) 및 hydroxylation이 ether결합(結合) 결렬 보다 현저하였다. hydroxide ion에 의한 친핵적(親核的) 치환(置換), hydroxyl기(基) 및 소량(少量)이긴 하지만 수소(水素)에 의한 염소(鹽素)의 치환(置換)도 다소 관찰되었다. MO-338의 용액상(溶液相) 광분해(光分解) : n-hexane용액중(中) nitro기(基)의 광환원(光遷元) 반응(反應)과 수용액중(水溶液中)에서의 광환원(光遷元) 및 hydroxylation이 주반응(主反應)이었으며 hydroxyl기(基)와 수소(水素)에 의(依)한 염소(鹽素)의 치환(置換) 및 ether결합(結合)의 결렬도 볼 수 있었다. n-Hexane과 cyclohexane중(中)에서의 MC-4379, MC-3761, MC-5127, MC-6063 및 MC-7181의 광분해(光分解) : nitro기(基)의 광환원반응(光還元反應)과 수소(水素)에 의(依)한 halogen의 치환반응(置換反應)이 주(主)로 일어났다. MC-4379의 수중(水中) 광분해(光分解) : ether결합(結合)의 결렬, hydroxyl기(基)에 의한 carboxymethyl기(基)의 치환(置換), hydroxylation, hydroxyl기(基)에 의한 nitro기(基)의 치환(置換)이 주(主)로 일어났고 광환원(光還元) 및 광염소화반응(光鹽素化反應)도 약간 일어났다. MC-3761의 수중(水中) 광분해(光分解) : ether결합(結合)의 결렬, hydroxyl기(基)에 의한 carboxymethyl기(基)의 치환(置換) 및 hydroxylation이 수반되는 광환원(光還元)이 주반응(主反應)이었다. MC-5127의 수중(水中) 광분해(光分解) : 수소(水素)에 의한 carboxyethyl기(基)의 치환(置換)이 현저 하였고 ether결합(結合)의 결렬, 광환원(光還元) 및 탈염소화반응(脫鹽素化反應)도 약간 관찰되었으며 decarboxyethylation은 decarxy-methylation보다 용이함을 볼 수 있었다. MC-6063의 수중(水中) 광분해(光分解) : ether결합(結合)의 결렬과 탈염소화반응(脫鹽素化反應)이 주(主)로 관찰되었다. MC-7181의 수중(水中) 광분해(光分解) : 수소(水素)에 의한 carboxymethyl기(基)의 치환(置換)과 monodechlorination이 현저하였고 ether결합(結合) 결렬과 hydroxylation도 약간 일어났다. 3-Carboxymethyl-4-nitrophenol의 수중(水中) 광분해(光分解) : 방향족(芳香族) ester에서 흔히 볼 수 있는 광유도(光誘導) Fries rearrangement는 이 화합물(化合物)의 carboxymethyl기(基)에서는 볼 수 없었고 $nitro{\to}nitroso$반응(反應)이 주(主)로 일어났다.

• 한국작물학회지
• /
• 제67권1호
• /
• pp.1-8
• /
• 2022

사료용 벼 주요품종의 최적수확 시기인 출수 후 30일에 수확한 부위 별 사료성분을 분석 후 사료가치 정보를 제공함으로써 수요자 용도에 맞는 사료 제조에 활용하고자 국립식량과학원 중부작물부 수원 벼 시험 포장에서 숙기별 대표 사료용 벼 4품종으로 시험한 결과는 다음과 같다. 1. 조단백질, 조회분 등 6개 사료성분 함량은 수확 부위별로 차이가 뚜렷하였다. 식물체 부위 중 이삭은 조단백질(6.97%), 리그닌(3.11%)은 유의하게 가장 높았던 반면 조회분, NDF 함량이 유의하게 낮아서 결과적으로 TDN 함량이 77.29%로 줄기(64.82%), 엽신+엽초(63.57%)보다 사료가치가 월등히 우수하였다(p<0.05). 반면 조지방 함량은 부위별로 유의한 차이가 없었다(p<0.05). 이삭에서 품종별 TDN 함량은 '조농', '녹양', '영우'의 경우 78.48~79.07%로 품종 간 유의한 차이가 없었고 '목우'의 경우 조단백질 함량이 8.70%로 타 품종의 6.24~6.64%에 비해 월등히 높았다(p<0.05). 이러한 사료성분 함량 분석은 육용우, 돼지, 닭 등의 영양가와 사료 설계 시 유용하게 활용 될 수 있다. 2. 줄기와 잎의 사료가치가 우수한 품종은 '목우'였다. '목우'의 경우 TDN 함량은 이삭에서 72.95%로 다소 낮았으나 줄기, 엽신+엽초에서는 각각 75.37%, 66.49%로 타품종에 비해 월등히 높았으며 조회분, NDF, ADF, 리그닌의 함량도 타 품종에 비해 매우 낮아 줄기와 잎의 사료가치가 우수하였다. '목우'의 총건물중은 주당 123 g으로 타 품종의 82~105 g/주 보다 월등히 높았으며, 부위별 1주 건물중 분포는 엽신+엽초(56.9 g)>줄기(36.8 g)>이삭(29.3 g)으로 이삭을 제외한 경엽 부위가 타 품종의 43~57%보다 월등히 많아(조고비율: 76%) 농가에서 조사료로 볏짚 이용 시 수량이나 사료가치 면에서 유리하다고 할 수 있다. 3. 부위별로 상대적사료가치(RFV)는 86.79~403.74까지의 범위를 보이고 있으며 RFV가 100이상인 3등급 이상의 건초는 줄기와 잎 모두에서 출수가 늦어질수록 증가하였고 이는 등숙이 진행됨에 따라 알곡으로의 전분질 축적에 기인한 것으로 판단되고 이는 '조농'과 '녹양' 이삭의 RFV가 출수가 빨라질수록 높아진 사실이 뒷받침 해준다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.