• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.147-156
• /
• 2016

In this paper, optimal designs of bicycle frame were studied for weight reduction of bicycle using carbon-fiber-reinforced plastic (CFRP), glass-fiber-reinforced plastic (GFRP) and Kevlar-fiber-reinforced plastic (KFRP), respectively. Based on the anisotropic properties of FRP material, stacking angle and thickness optimization were performed under the safety reference of European committee for standardization (CEN) to ensure the stability of bicycle frame. Finally, performances of FRP bicycle frame was evaluated by digital logic method based on the optimized results of weight, strength properties and cost. Then, the optimized bicycle frame composed of each FRPs were evaluated and ranked by total performance values.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.8-13
• /
• 2017

Movement technique is comprised of the movement status of the circulation differentiation rate (CDR) and rotation differentiation rate (RDR) on the shiver movement form. Condition of the differentiation rate by the shiver movement form is to be modified the teetering movement system. As to fix the movement of signal on the material of body, we compared a shiver value of the circulation differentiation rate on the circulation state. The concept of rotation differentiation rate was identified the reference of rotation differentiation signal and rotation differentiation signal by the rotation state. For detecting a alteration of the CDR-RDR of the maximum and average in terms of the movement form, and shiver movement value that was a shiver value of the top alteration of the Top-ф$_{MAX-AVG}$ with $12.80{\pm}1.27units$, that was a shiver value of the peripheral alteration of the Per-ф$_{MAX-AVG}$ with $4.38{\pm}1.15units$, that was a shiver value of the limbus alteration of the Lim-ф$_{MAX-AVG}$ with $1.65{\pm}0.25units$, that was a shiver value of the center alteration of the Cen-ф$_{MAX-AVG}$ with $0.25{\pm}0.01units$. The teetering movement will be to assess at the ability of the movement form for the control degree of differentiation rate on the CDR-RDR that was shown the circulation and rotation form by the differentiation rate system. Teetering differentiation system was modified of a form by the special movement and was included a shiver data of teetering movement rate.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.5
• /
• pp.1943-1948
• /
• 2014

Purpose: The prevalence of weight loss in esophageal carcinoma patients is high and associated with impairment of physical function, increased psychological distress and low quality of life. It is not known which factors may contribute to weight loss in patients with esophageal carcinoma during radiotherapy in China. The objective of this study was to identify the associated demographic and clinical factors influencing weight loss. Methods: We evaluated 159 esophageal carcinoma patients between August 2010 and August 2013 in a crosssectional, descriptive study. Patient characteristics, tumor and treatment details, psychological status, adverse effects, and dietary intake were evaluated at baseline and during radiotherapy. A multivariate logistic regression analyss was performed to identify the potential factors leading to weight loss. Results: 64 (40.3%) patients had weight loss ${\geq}5%$ during radiotherapy. According to logistic regression analysis, depression, esophagitis, and loss of appetite were adverse factors linked to weight loss. Dietary counseling, early stage disease and total energy intake ${\geq}1441.3$ (kcal/d) were protective factors. Conclusions It was found that dietary counseling, TNM stage, total energy intake, depression, esophagitis, and loss of appetite were the most important factors for weight loss. The results underline the importance of maintaining energy intake and providing dietary advice in EC patients during RT. At the same time, by identifying associated factors, medical staff can provide appropriate medical care to reduce weight loss. Further studies should determine the effect of these factors on weight loss and propose a predictive model.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.21-30
• /
• 1997

Chogori the basic upper garment of korea costume occupies an important role in tra-ditional dressing and continues to be in use to the present days. Of course there has been changes in the length and line of Chogori with the flow of time based on the Ancient Yoo. This is a study of the 14 parts of Chgori based on statistical analysis by computing the practical measuements. Here the statistical analysis is a objective and quantitative of the stylistic changes in Chogori with time. In this study from the data the Mean and Standard deviation has been evaluated and periodic change is shown by graph to test the periodic change T-test Regressional analysis Index analysis has been used. The results are as follows: 1. The length of clothing has changed with time except the sleeve length. Here the length of clothing means all the other measurements ex-cept the sleeve Thus while the measurements of sleeve length has been uniquely unchanged the other measurements have influenced each other. 2. Generally the form of Chogori had the tendency towards smallness in the 19th cen-tury. But it tended to get larger in the 20th century. 3. Compared to other periods the mode of 19th and 20th century Chogori was widely ac-cepted as the Standard deviation of that period was very narrow. 4. The results seen from the regressional analysis of the Cho-sun period woman's Chogori satisfy the t-value and R-squared and thus support the regression formula presump-tion. 5. From the index analysis it is revealed that with decrease in the armhole measurement sleeve measurement and neckband; relatively same decrease in the wrist measurement; and very marked decrease in the sideline measurement.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5459-5473
• /
• 2017

Recently, a tracking algorithm called the spatial-temporal context model has been proposed to locate a target by using the contextual information around the target. This model has achieved excellent results when the target undergoes slight occlusion and appearance changes. However, the target location in the current frame is based on the location in the previous frame, which will lead to failure in the presence of fast motion because of the lack of a prediction mechanism. In addition, the spatial context model is updated frame by frame, which will undoubtedly result in drift once the target is occluded continuously. This paper proposes two improvements to solve the above two problems: First, four possible positions of the target in the current frame are predicted based on the displacement between the previous two frames, and then, we calculate four confidence maps at these four positions; the target position is located at the position that corresponds to the maximum value. Second, we propose a target reliability criterion and design an adaptive threshold to regulate the updating speed of the model. Specifically, we stop updating the model when the reliability is lower than the threshold. Experimental results show that the proposed algorithm achieves better tracking results than traditional STC and other algorithms.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.48-53
• /
• 2006

The asymmetric biosynthesis of ethyl (S)-4-chloro-3-hydrobutanoate from ethyl 4-chloro-3-oxobutanoate was investigated by using whole cells of Candida magnoliae JX120-3 without the addition of glucose dehydrogenase or $NADP^+/NADPH$. In a one-phase system, the bioconversion yield was seriously affected on the addition of 12.1 g/L ethyl 4-chloro-3-oxobutanoate. In order to reduce this substrate inhibition, a water/ n-butyl acetate two-phase system was developed, and the bioreduction conditions optimized with regard to the yield and product enantiometric excess value. The optimal conditions were as following: water to n-butyl acetate volume ratio of 1:1, 4.0 g DCW/L active cells, 50 g/L glucose and $35^{\circ}C$. By adopting a dropwise substrate feeding strategy, high concentration of ethyl 4-chloro-3-oxobutanoate (60 g/L) could be asymmetrically reduced to ethyl (S)-4-chloro-3-hydrobutanoate with high yield (93.8%) and high enantiometric excess value (92.7%).

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.30.2-30.2
• /
• 2009

There is a growing body of evidence for the presence of multiple stellar populations in some globular clusters, including NGC 1851. For most of these peculiar globular clusters, however, the evidence for the multiple red giant-branches (RGBs) having different heavy elemental abundances as observed in $\omega$ Centauri is hitherto lacking, although spreads in some lighter elements are reported. It is therefore not clear whether they also share the suggested dwarf galaxy origin of $\omega$ Cen or not. Here we show from the CTIO 4m UVI photometry of the globular cluster NGC 1851 that its RGB is clearly split into two in the U - I color. The two distinct RGB populations are also clearly separated in the abundance of heavy elements as traced by Calcium, suggesting that the type II supernovae enrichment is also responsible, in addition to the pollutions of lighter elements by intermediate mass asymptotic giant branch stars or fast-rotating massive stars. The RGB split, however, is not shown in the V - I color, as indicated by previous observations. Our stellar population models show that this and the presence of bimodal horizontal-branch distribution in NGC 1851 can be naturally reproduced if the metal-rich second generation stars are also enhanced in helium.

• Structural Engineering and Mechanics
• /
• v.15 no.1
• /
• pp.83-114
• /
• 2003

A new simple 3-node triangular flat-shell element with standard nodal DOF (6 DOF per node) is proposed for the linear and geometrically nonlinear analysis of very thin to thick plate and shell structures. The formulation of element GT9 (Long and Xu 1994), a generalized conforming membrane element with rigid rotational freedoms, is employed as the membrane component of the new shell element. Both one-point reduced integration scheme and a corresponding stabilization matrix are adopted for avoiding membrane locking and hourglass phenomenon. The bending component of the new element comes from a new generalized conforming Kirchhoff-Mindlin plate element TSL-T9, which is derived in this paper based on semiLoof constrains and rational shear interpolation. Thus the convergence can be guaranteed and no shear locking will happen. Furthermore, a simple hybrid procedure is suggested to improve the stress solutions, and the Updated Lagrangian formulae are also established for the geometrically nonlinear problems. Numerical results with solutions, which are solved by some other recent element models and the models in the commercial finite element software ABAQUS, are presented. They show that the proposed element, denoted as GMST18, exhibits excellent and better performance for the analysis of thin-think plates and shells in both linear and geometrically nonlinear problems.

• Environmental Mutagens and Carcinogens
• /
• v.25 no.1
• /
• pp.40-46
• /
• 2005

2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) displays high toxicity in animals and has been implicated in human carcinogenesis. Although the mechanism of carcinogenesis by TCDD is unclear, it is considered to be a non-genotoxic compound and tumor promoter. In our experiment, we investigated the effects of TCDD on gene expression in mouse skin carcinogenesis. We used cDNA microarray to detect the differential gene expression in tumors induced in hairless mouse skin by MNNG plus TCDD protocol. We found that erb-2, c-ets2 and p27$^{kip1}$ were significantly up-regulated, but TNFR2, AKT-l, integrin $\beta$l, maspin, IGF-l, c-raf-l, Rb were significantly down-regulated, in tumor region, respectively. We also found that the expression of 53 genes involved in cen cycle, signal transduction, apoptosis, adhesion molecule, angiogenesis, and invasion, were changed two fold more, in tumor surrounding region. These data suggest that TCDD alters the expression of a large array of genes involved in apoptosis, cytokine production and angiogenesis in mouse skin carcinogenesis.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.273-284
• /
• 2022

PURPOSE. Computer-aided design and manufacturing (CAD-CAM) of implant abutments has been shown to result in surface contamination from site-specific milling and fabrication processes. If not removed, these contaminants can have a potentially adverse effect and may trigger inflammatory responses of the peri-implant tissues. The aim of the present study was to evaluate the bacterial disinfection and cleaning efficacy of ultrasonic reprocessing in approved disinfectants to reduce the microbial load of CAD-CAM abutments. MATERIALS AND METHODS. Four different types of custom implant abutments (total N = 32) with eight specimens in each test group (type I to IV) were CAD-CAM manufactured. In two separate contamination experiments, specimens were contaminated with heparinized sheep blood alone and with heparinized sheep blood and the test bacterium Enterococcus faecium. Abutments in the test group were processed according to a three-stage ultrasonic protocol and assessed qualitatively and quantitatively by determination of residual protein. Ultrasonicated specimens contaminated with sheep blood and E. faecium were additionally eluted and the dilutions were incubated on agar plates for seven days. The determined bacterial counts were expressed as colony-forming units (CFU). RESULTS. Ultrasonic reprocessing resulted in a substantial decrease in residual bacterial protein to less than 80 ㎍ and a reduction in microbiota of more than 7 log levels of CFU for all abutment types, exceeding the effect required for disinfection. CONCLUSION. A three-stage ultrasonic cleaning and disinfection protocol results in effective bacterial decontamination. The procedure is reproducible and complies with the standardized reprocessing and disinfection specifications for one- or two-piece CAD-CAM implant abutments.