• The Korean Journal of Ceramics
• /
• v.5 no.1
• /
• pp.1-11
• /
• 1999

The effect of aliovalent dopents, $Nb_3O_5$ and MnO, on the grain growth kinetics of 12 mol% ceria stabilized tetragonal zirconia polycrystals (Ce-TZP) was studied. All specimens were sintered at $1550^{\circ}C$ for 20 minutes prior to annealing at different temperatures to study grain growth kinetics. Grain growth kinetics of Ce-TZP and 1 mol% $Nb_2O_5$ doped Ce-TZP (Ce-TZP/$Nb_3O_5$) during annealing at 1475, 1550, and $1600^{\circ}C$ adequately matched with square law $(D^2-D_\;o^2=k_at)$. However, grain growth in 1 mol% MnO suppressed grain growth in Ce-TZP by drag force exerted by $Mn^{+2}$ ions which segregated strongly to the positively-charged grain boundaries of Ce-TZP, $Nb_2O_5$ enhanced grain growth by increasing the concentration of vacancies of $Zr^{+4}$ ion and $Ce^{+4}$ ions. Surface analysis with X-ray photoelectron spectroscopy (XPS) showed the segregation of Mn+2 ions to grain boundaries. The kinetics of grain growth obtained in the base Ce-TZP and the Ce-TZPs with the aliovalent dopants were examined in the context of impurity drag effect and space charge effect.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.233-243
• /
• 1990

For theinvestigation of MgO addition effect on 12Ce-TZP ceramics, MgO-CeO2-ZrO2 ceramics was fabricated using commercial powders under sintering condition of 130$0^{\circ}C$-1$600^{\circ}C$ for 2hr. Fully tetragonal phase could be obtained by proper heat treatment and MgO addition amount. Minor cubic phase was appeared in relatively high MgO content composition at each sintering temperature. As alloying amount of MgO increased, tetragonal stability increased and grain size decreased. Grain size dependence on MgO content was verified by SEM observation of fractured surface. Surface bloating was observed from the 2 m/o to 6m/o in the temperature range of 150$0^{\circ}C$ to 1$600^{\circ}C$. In spite of very porous microstructure owing to surface bloating, 100% TZP could be maintained in 2.0m/o MgO composition by heat treatment of 150$0^{\circ}C$. This result indicated that MgO was more powerful stabilizer than CeO2. Mechanical proprties of MgO-CeO2-ZrO2 ceramics were consistent with the stability observation of tetragonal phase very well.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.545-550
• /
• 2000

3Y-TZP, 12Ce-TZP 및 3Y-TZP, 12Ce-TZP 현탁액의 제타포텐셜과 겉보기점도의 측정으로부터 슬립주입공정에 의한 다층복합체의 제조조건을 조사하였다. 아울러 다층복합체의 소결밀도, 미세구조, 결정상에 미치는 열처리의 영향을 검토하였다. 3Y-TZP와 12Ce-TZP 현탁액의 등전점을 pH 8부근이었으나 3Y-TZP/12Ce-TZP의 등전점은 pH8.6이었다. 현탁액은 전단속도의 증가와 더불어 점도가 감소하는 의가소성유동을 나타내었다. 15 및 20vol% 고체함량을 갖는 3Y-TZP와 3Y-TZP/12Ce-TZP 현탁액은 소량(0.3wt%)의 유기해교제의 첨가만으로 슬립주입에 적당한 유동성을 보유하였으나, 12Ce-TZP의 경우는 점도를 감소시키기 위하여 부가적인 전해질이 필요하였다. 이론밀도의 98% 이상을 보유하고 0.3~$2.2\mu\textrm{m}$의 입경을 갖는 치밀한 다층복합체가$ 1500^{\circ}C$ 소결로 얻어졌다.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.21-26
• /
• 2002

Textured CeO2 buffer layers for YBCO coated conductors were deposited on biaxially textured Ni substrate by metalorganic chemical vapor deposition (MOCVD). The degree of texture of deposited $CeO_2$ films was strong1y dependent on the deposition temperature (Td) and oxygen Partial Pressure(PO2). ($\ell$00) textured $CeO_2$ films were well deposited at T=500~52$0^{\circ}C$. PO2=0.90~3.33 Torr. The surface morphology showed that the films consisted of columnar CeO2 films grown from the Ni substrates. The root mean square roughness of CeO$_2$ films estimated by atomic force microscopy(AFM) increased as the deposition temperature(Td) increa- sed. The growth rate of the $CeO_2$ films deposited at T=52$0^{\circ}C$ and PO2=2.30 Torr was 150~200 nm/min that was much faster than that of other Physical deposition methods.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.4
• /
• pp.185-192
• /
• 2016

Chronic endometritis (CE) is a condition involving the breakdown of the peaceful co-existence between microorganisms and the host immune system in the endometrium. A majority of CE cases produce no noticeable signs or mild symptoms, and the prevalence rate of CE has been found to be approximately 10%. Gynecologists and pathologists often do not focus much clinical attention on CE due to the time-consuming microscopic examinations necessary to diagnose CE, its mild clinical manifestations, and the benign nature of the disease. However, the relationship between CE and infertility-related conditions such as repeated implantation failure and recurrent miscarriage has recently emerged as an area of inquiry. In this study, we reviewed the literature on the pathophysiology of CE and how it may be associated with infertility, as well as the literature regarding the diagnosis and treatment of CE. In addition, we discuss the value of hysteroscopic procedures in the diagnosis and treatment of CE.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.613-616
• /
• 2001

The effect of codopants on the electroluminescent properties for SrS-Ce based thin films was studied. The active layer was deposited by electron beam with sulfur The wavelength of eletroluminecence shifted with codopants and their concentrations. The intensity ratio of blue to green were found In the CeP-doped device, but the highest total intensity of luminance showed about 850cd/$m^2$ in the CeCl$_3$+KCL-doped device, which indicates that codopants are playing an important role of luminance. At any device, the luminance was the strongest at 0.2 mol% concentration among the concentration studied, suggesting the existence of optimum concentration. By post-annealing Luminance of most devices was improved, but the shift of wavelength was not observed.

• Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.131-137
• /
• 2005

The catalytic activity of precious metals(Rh, Pd, Pt) and nickel catalysts supported on ${\gamma}-Al_2O_3\;and\;CeO_2$ in the partial combustion of methane(PCM) to syngas was investigated based on the product distribution in a fixed bed now reactor under atmospheric condition and also on analysis results by SEM, XPS, TPD, BET, and XRD. The activity of the catalysts based on the syngas yield increased in the sequence $Rh(5)/CeO_2{\geq}Ni(5)/CeO_2>>Rh(5)/Al_2O_3>Pd(5)/Al_2O_3>Ni(5)/Al_2O_3$. Compared to the precious catalysts, the syngas yield and stability of the $Ni(5)/CeO_2$ catalyst were almost similar to $(5)/CeO_2$ catalyst, and superior to these of any other catalysts. The syngas yield of $Ni(5)/CeO_2$ catalyst was 90.66% at 1023 K. It could be suggested to be the redox cycle of the successive reaction and formation of active site, $Ni^{2-}$ and the lattice oxygen, $O^{2-}$ produced due to reduction of $Ce^{4-}$ to $Ce^{3-}$.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.2
• /
• pp.90-97
• /
• 2021

Objective: The purpose of this study was to find out how the back instability during clam exercise (CE) causes changes in pelvic rotation and hip joint abductor muscle activity, and to find out the effects with different methods of application of pressure biofeedback. Design: Comparative study using repeated measures. Methods: Each subjects performed the clam exercise (CE) without pressure biofeedback, the clam exercise with pressure biofeedback applied to the back (CE-PBU to back), and the clam exercise with pressure biofeedback applied to the side (CE-PBU to side). The amount of pelvic rotation was measured using myomotion. And the muscle activity of the muscle gluteus medius and the tensor fasciae latae was measured using EMG device. One-way repeated measures ANOVA followed by the Bonferroni post test were used to compare the EMG activity in each muscle and pelvic rotation angle during the CE, CE-PBU to back, CE-PBU to side. Results: The amounts of pelvic rotation was the lowest in CE-PBU to back (p< 0.05) and the ratio of muscle activity of the muscle gluteus / tensor fasciae latae was the highest in CE-PBU to back (p< 0.05). Conclusions: It is thought that, in order to stabilize the waist-pelvis and increase hip joint muscle strength in subjects with back instability, applying clam exercise with pressure biofeedback applied to the lower back is effective in improving waist-pelvic movements and selectively strengthening the muscle gluteus medius.

• Clean Technology
• /
• v.21 no.3
• /
• pp.200-206
• /
• 2015

In order to investigate the effect of cerium oxide addition, Cu-ZnO-CeO₂ catalysts were prepared using co-precipitation method for water gas shift (WGS) reaction. A series of Cu-ZnO-CeO₂ catalyst with fixed Cu Content (50 wt%, calculated as CuO) and a given ceria content (e.g., 0, 5, 10, 20, 30, 40 wt%, calculated as CeO₂) were tested for catalytic activity at a GHSV of 95,541 h^-1, and a temperature range of 200 to 400 ℃. Cu-ZnO-CeO₂ catalysts were characterized by using BET, SEM, XRD, H₂-TPR, and XPS analysis. Varying composition of Cu-ZnO-CeO₂ catlysts led the difference characteristics such as Cu dispersion, and binding energy. The optimum 10 wt% doping of cerium facilitated catalyst reduction at lower temperature and improved the catalyst performance greatly in terms of CO conversion. Cerium oxide added catalyst showed enhanced activities at higher temperature when it compared with the catalyst without cerium oxide. Consequently, ceria addition of optimal composition leads to enhanced catalytic activity which is attributed to enhanced Cu dispersion, lower binding energy, and hindered Cu metal agglomeration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.9
• /
• pp.1225-1233
• /
• 2017

Objective: Calving ease (CE) is a complex reproductive trait of economic importance in dairy cattle. This study was aimed to investigate the genetic merits of CE for Holsteins in Korea. Methods: A total of 297,614 field records of CE, from 2000 to 2015, from first parity Holstein heifers were recorded initially. After necessary data pruning such as age at first calving (18 to 42 mo), gestation length, and presence of sire information, final datasets for CE consisted of 147,526 and 132,080 records for service sire calving ease (SCE) and daughter calving ease (DCE) evaluations, respectively. The CE categories were ordered and scores ranged from CE1 to CE5 (CE1, easy; CE2, slight assistance; CE3, moderate assistance; CE4, difficult calving; CE5, extreme difficulty calving). A linear transformation of CE score was obtained on each category using Snell procedure, and a scaling factor was applied to attain the spread between 0 (CE5) and 100% (CE1). A sire-maternal grandsire model analysis was performed using ASREML 3.0 software package. Results: The estimated direct heritability ($h^2$) from SCE and DCE evaluations were $0.11{\pm}0.01$ and $0.08{\pm}0.01$, respectively. Maternal $h^2$ estimates were $0.05{\pm}0.02$ and $0.04{\pm}0.01$ from SCE and DCE approaches, respectively. Estimates of genetic correlations between direct and maternal genetic components were $-0.68{\pm}0.09$ (SCE) and $-0.71{\pm}0.09$ (DCE). The average direct genetic effect increased over time, whereas average maternal effect was low and consistent. The estimated direct predicted transmitting ability (PTA) was desirable and increasing over time, but the maternal PTA was undesirable and decreasing. Conclusion: The evidence on sufficient genetic variances in this study could reflect a possible selection improvement over time regarding ease of calving. It is expected that the estimated genetic parameters could be a valuable resource to formulate sire selection and breeding plans which would be directed towards the reduction of calving difficulty in Korean Holsteins.