• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.757-761
• /
• 2019

The catalytic yields of POM to hydrogen over M(1)-Ni(5)/AlCeO₃ (M = La, Ce, Y) were investigated using a fixed bed flow reactor under atmosphere. The crystal phase behavior of reduced La(1)-Ni(5)/AlCeO₃ catalysts before and after the reaction were studied via XRD analysis. FESEM and EDS analyses were further performed to show the uniformed distribution of La, Ni, and Ce metal particles on the catalyst surface. XPS results showed O^2-, O₂^2- species and metal ions such as Ce³⁺, Ce⁴⁺, La³⁺ and Ni²⁺ etc. were on the catalyst surface. When 1 wt% of La was added to Ni(5)/AlCeO₃ catalyst, Ni2p_3/2 and Ce3d_5/2 increased 52.7 and 6.3%, respectively. The yield of hydrogen on the La(1)-Ni(5)/AlCeO₃ catalyst was 89.1%, which was much better than that of M(1)-Ni(5)/AlCeO₃ (M = Ce, Y). As Ce⁴⁺ ions of CeO₂ produced by the reaction of AlCeO₃ with oxygen were substitute to La³⁺, it made oxygen vacancies in the lattice and further improved the hydrogen yield by increasing the dispersion of Ni atoms with strong metal-support interaction (SMSI) effect.

• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.719-727
• /
• 1989

By using commercial zirconia powder CeO2-ZrO2 ceramics containing 8~16mol% CeO2 was made by heat treatment at 1350~155$0^{\circ}C$ for 1~10hr. The minimum amount of CeO2 for obtaining complete tetragonal phase was 12mol%, and in the tetragonal phase region fracture toughness of Ce-TZP was decreased with increasing CeO2 content and the maximum value was obtained when 12mol% CeO2 was added. The bending strength goes through maximum at 14mol% CeO2. Fracture mode of Ce-TZP transformed from intergranular to transgranular fracture with increasing CeO2 content, so the morphology of fracture surface of 16mol% Ce-TZP was wholly transgranular and this tendency was independent on grain size. The crystal structure of the 12mol% Ce-TZP was monoclinic with fringes along the grain boundaries which are lying in the particular plane from the TEM observation. The chemical composition of the sintered body was homogeneous as a whole and some amorphism or air pocket was observed at the triple junction.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.27-31
• /
• 2002

In this study, $CeO_2$ thin films were etched with an addition of $Cl_2$ gas to $Ar/CF_4$ gas mixing in an inductively coupled plasma (ICP) etcher by the etching parameter such as RF power of 700 W, chamber pressure of 15 mTorr and dc bias voltage of -200 volts. The etch rate of $CeO_2$ films was 250 $\AA$/min with an addition of 10% $Cl_2$ gas to $Ar/CF_4$ gas mixture and the selectivity to SBT film was 0.4 at that condition. The surface reactions of the etched $CeO_2$ thin films were investigated by X-ray photoelectron spectroscopy (XPS). It was analyzed that Ce peaks were mainly observed in Ce-O bonds formed $CeO_2$ or $Ce_2O_3$ compounds. Cl peaks were detected by the peaks of Cl $2p_{3/2}$ and Cl $2p_{1/2}$. Almost all of Cl atoms were combined with Ce atoms like $CeCl_x$ or $Ce_x/O_yCl_z$ compounds.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.67-67
• /
• 2000

CeO2는 cubic 구조의 일종인 CaR2 구조를 가지고 있으며 격자상수가 Si의 격장상수와 매우 비슷하여 Si 기판위에 에피텍셜하게 성장할 수 있는 가능성이 매우 크다. 따라서 SOI(silicon-on-insulator)구조의 실현을 위하여 Si 기판위에 CeO2 박막을 에피텍셜하게 성장시키려는 많은 노력이 있어왔다. 또한 metal-ferroelectric-semiconductor field effect transistor)에서 ferroelectric 박막과 Si 기판사이의 완충층으로 사용된다. 이러한 CeO2의 응용을 위해서는 Si 기판 위에 성장된 CeO2 박막의 방위성 및 CeO2/Si 구조의 전기적 특성을 알아보는 것이 매우 중요하다. 본 연구에서는 Si(100) 기판위에 CeO2(200)방향으로 성장하는 박막과 EcO2(111) 방향으로 성장하는 박막을 rf magnetron sputtering 방법으로 증착하여 각각의 구조적, 전기적 특성을 분석하였다. RCA 방법으로 세정한 P-type Si(100)기판위에 Ce target과 O2를 사용하여 CeO2(200) 및 CeO2(111)박막을 증착하였다. 증착후 RTA(rapid thermal annealing)방법으로 95$0^{\circ}C$, O2 분위기에서 5분간 열처리를 하였다 이렇게 제작된 CeO2 박막의 구조적 특성을 XRD(x-ray diffraction)방법으로 분석하였고, Al/CeO2/Si의 MIS(metal-insulator-semiconductor)구조를 제작하여 C-V (capacitance-voltage), I-V (current-voltage) 특성을 분석하였으며 TEM(transmission electron microscopy)으로 증착된 CeO2막과 Si 기판과의 계면 특성을 연구하였다. C-V특성에 있어서 CeO2(111)/Si은 CeO2(111)의 두께가 증가함에 따라 hysteresis windows가 증가한 방면 CeO2(200)/Si은 hysteresis windows가 아주 작을뿐만 아니라 CeO2(200)의 두께가 증가하더라도 hysteresis windos가 증가하지 않았다. CeO2(111)/Si과 CeO2(200)/Si의 C-V 특성의 차이는 CeO2(111)과 CeO2(200)이 Si 기판에 의해 받은 stress의 차이와 이에 따른 defect형성의 차이에 의한 것으로 사료된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.103-103
• /
• 1999

CeO2 는 cubic 구조의 일종인 CeF2 구조를 가지며 격자 상수가 0.541nm로 Si의 격자 상수 0.543nm와 거의 비슷하여 Si과의 부정합도가 0.35%에 불과하여 CeO2를 Si 기판 위에 에피택셜하게 성장시킬 수 있는 가능성이 크다. 따라서 SOI(Silicon-On-Insulator) 구조의 실현을 위하여 Si 기판위에 CeO2를 에피택셜하게 성장시키려는 많은 노력이 있었다. 또한 CeO2 는 열 적으로 대단히 안정된 물질로서 금속/강유전체/반도체 전계효과 트랜지스터(MFSFET : metal-ferroelectric-semiconductor field effect transistor)에서 ferroelectric 박막과 Si 기판사이에 완충층으로 사용되어 강유전체의 구성 원자와 Si 원자들간의 상호 확산을 방지함으로써 경계면의 특성을 향상시기키 위해 사용된다. e-beam evaporation와 laser ablation에 의한 Si 기판 위의 CeO2 격자 성장에 관한 많은 보고서가 있다. 이 방법들은 대규모 생산 공정에서 사용하기 어려운 반면 RF-magnetron sputtering은 대규모 반도체 공정에 널리 쓰인다. Sputtering에 의한 Si 기판위의 CeO2 막의 성장에 관한 보고서의 수는 매우 적다. 이 논문에서는 Ce target을 사용한 reactive rf-magnetron sputtering에 의해 Si(100) 과 Si(111) 기판위에 성장된 CeO2 의 구조 및 전기적 특성을 보고하고자 한다. 주요한 증착 변수인 증착 power와 증착온도, Seed Layer Time이 성장막의 결정성에 미치는 영향을 XRD(X-Ray Diffractometry) 분석과 TED(Transmission Electron Diffration) 분석에 의해 연구하였고 CeO2 /Si 구조의 C-V(capacitance-voltage)특성을 분석함으로써 증차된 CeO2 막과 실리콘 기판과의 계면 특성을 연구하였다. CeO2 와 Si 사이의 계면을 TEM 측정에 의해 분석하였고, Ce와 O의 화학적 조성비를 RBS에 의해 측정하였다. Si(100) 기판위에 증착된 CeO2 는 $600^{\circ}C$ 낮은 증착률에서 seed layer를 하지 않은 조건에서 CeO2 (200) 방향으로 우선 성장하였으며, Si(111) 기판 위의 CeO2 박막은 40$0^{\circ}C$ 높은 증착률에서 seed layer를 2분이상 한 조건에서 CeO2 (111) 방향으로 우선 성장하였다. TEM 분석에서 CeO2 와 Si 기판사이에서 계면에서 얇은 SiO2층이 형성되었으며, TED 분석은 Si(100) 과 Si(111) 위에 증착한 CeO2 박막이 각각 우선 방향성을 가진 다결정임을 보여주었다. C-V 곡선에서 나타난 Hysteresis는 CeO2 박막과 Si 사이의 결함때문이라고 사료된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.8-13
• /
• 2001

Cerium oxide ($CeO_2$) thin film has been proposed as a buffer layer between the ferroelectric thin film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS) structures for ferroelectric random access memory (FRAM) applications. In this study, $CeO_2$ thin films were etched with $Cl_2$/Ar gas mixture in an inductively coupled plasma (ICP). Etch properties were measured for different gas mixing ratio of $Cl_2$($Cl_2$+Ar) while the other process conditions were fixed at RF power (600 W), dc bias voltage (-200 V), and chamber pressure (15 mTorr). The highest etch rate of $CeO_2$ thin film was 230 ${\AA}$/min and the selectivity of $CeO_2$ to $YMnO_3$ was 1.83 at $Cl_2$($Cl_2$+Ar gas mixing ratio of 0.2. The surface reaction of the etched $CeO_2$ thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. There is a Ce-Cl bonding by chemical reaction between Ce and Cl. The results of secondary ion mass spectrometer (SIMS) analysis were compared with the results of XPS analysis and the Ce-Cl bonding was monitored at 176.15 (a.m.u). These results confirm that Ce atoms of $CeO_2$ thin films react with chlorine and a compound such as CeCl remains on the surface of etched $CeO_2$ thin films. These products can be removed by Ar ion bombardment.

• Clean Technology
• /
• v.26 no.4
• /
• pp.286-292
• /
• 2020

This study confirmed the effect of the Cu/CeO2-X catalyst on the CO oxidation activity at low temperature through the catalyst's structure and reaction characteristics. The catalyst was prepared by the wet impregnation method. Cu/CeO2_X catalysts were manufactured by loading Cu (active metal) using CeO2 (support) formed at different calcination temperatures (300-600 ℃). Manufactured Cu/CeO2_X catalysts were evaluated for the low-temperature activity of carbon monoxide. The Cu/CeO2_300 catalyst showed an activity of 90% at 125 ℃, but the activity gradually decreased as the calcination temperature of the CeO2-X and Cu/CeO2_600 catalysts showed an activity of 65% at 125 ℃. Raman, XRD, H2-TPR, and XPS analysis confirmed the physicochemical properties of the catalysts. Based on the XPS analysis, the lower the calcination temperature of the CeO2 was, the higher the unstable Ce3+ species (non-stoichiometric species) ratio became. The increased Ce3+ species formed a solid solution bond between Cu and CeO2-X, and it was confirmed by the change of the CeO2 peak in Raman analysis and the reduction peak of the solid solution structure in H2-TPR analysis. According to the result, the formation of the solid solution bond between Cu and Ce has been enhanced by the redox properties of the catalysts and by CO oxidation activity at low temperatures.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.471-476
• /
• 2006

series of Ca1-xSrxS:Ce phosphors were synthesized by solid-state reactions. The Ca1-xSrxS:Ce phosphors have a strong absorption in region from 430 nm to 470 nm. The emission peaks of CaS:Ce are located at 510 nm and 570 nm. The partial replacement of Ca by Sr in Ca1-xSrxS:Ce causes a blue shift of emission wavelengths. The Ca1-xSrxS:Ce can be used as bluish green and yellow emitting phosphors for white light emitting diodes (LEDs) pumped by the blue LED. We reported the optical properties of Ca1-xSrxS:Ce phosphors for application in phosphor converted white LEDs.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.89-94
• /
• 2001

The binding of cellobiohydrolases to cullulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding changes during hydrolysis is still needed. The adsorption of purified two cellobiohydrolases (Ce17A and Ce16A) from Trichoderma reesei cellulase to microcrystalline cellulose has been studied. Cellobiohydrolase II (Ce16A) does not affect the adsorption of cellobiohydrolase I (Ce17A) significantly, and there are specific binding sites for both Ce17A and Ce16A. The adsorption affinity and tightness of the cullulase binding domain (CBD) for Ce17A are larger than those of the CBD for Ce16A. The CBD for Ce17A binds more rapidly and tightly to Avicel than the CBD for Ce16A. The decrease in adsorption observed when the two cellobihydrolases are studied together would appear to be the result of competition for binding sites on the cellulose. Ce17A competes more efficiently for binding sites than Ce16A. Competition for binding sites is the dominating factor when the two enzymes are acting together, furthermore adsorption to sites specific for Ce17A and Ce16A, also contributes to the total adsorption.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.4
• /
• pp.533-541
• /
• 2016

Effect of polyphenols-rich cacao extract (CE) on lipid hydrolysis by pancreatic lipase was investigated by pH-stat digestion. Two types of substrate (oil vs. emulsion) prepared from soybean oil and CE were studied as types I and II. In the case of type I, addition of CE did not show retardation of lipid hydrolysis, showing that pancreatic lipase was not inhibited. Final digestibility rate (${\Phi}$ max, %) and initial rate (mM/s) of the 24-h aged control (52.31%, 0.03 mM/s) were similar to those of the CE-added sample (58.88%, 0.03 mM/s). However, in the case of typeII, the hydrolysis rates of the control and CE-added emulsion showed distinct differences as aging time increased to 43 days, showing lower digestion in the CE-added emulsion than the control. After 43 days, ${\Phi}$ max values of the control and CE-added emulsion were 92.13% and 77.68%, respectively.