• Journal of Communications and Networks
• /
• v.6 no.1
• /
• pp.26-34
• /
• 2004

A blind interference canceller in the presence of subchipspaced multipath channels for direct-sequence code division multiple access (DS-CDMA) down-link system is considered. This technique is based on combining the existing blind interference canceller with a technique that involves assigning subchip-tap spacing to the Rake receiver. The proposed receiver minimizes the receiver’s output energy subject to a constraint in order to mitigate the multiple access interference (MAI) along each multipath component, and then suboptimally combining all the multipath components. Moreover, it is able to mitigate the mismatch problem when subchip-spaced multipath components arrive at the blind interference canceller. It is known that optimal combining techniques perform a decorrelation operation before combining, which requires both knowledge and computational complexity. In the following, we have adopted a simpler but suboptimum approach in the combining of the suppressed signals at the output of our proposed receiver. Computer simulation results verify the effectiveness of the proposed receiver to handle subchip-spaced multipath components and still suppresses MAI significantly.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.99-103
• /
• 2003

For mobile multimedia systems that equip transmit diversity for a forward channel, it is well known that the Tx diversity technique is appropriate for high rate mobile multimedia communications. In this paper, we propose a STTD (Space Time Transmit Diversity) receiver, which incorporates the design of the Tx diversity receiver without the mutual interference of antenna by using a CCI cancellation technique. The new STTD receiver is simulated and its performance is analyzed in a DS-CDMA/QPSK. Adopting the proposed STTD receiver at $10^{-2}$TEX>∼$10^{-4}$TEX> in bit error rate, SNR of 0.5 ㏈∼2 ㏈ performance improvement in AWGN and Rayleigh fading environments has been achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1298-1310
• /
• 2001

이 논문에서는 채널 상태가 천천히 변할 때, 직교 주파수 분할 다중화-부호분할 다중접속 시스템에 적합한 채널 추정 방법을 제안하고 성능을 분석한다. 제안한 채널 추정 방법은 시간과 주파수 영역 모두에 파일럿 심볼을 삽입하고, 이산 퓨리에 변환 후 영을 채워 넣는 방법을 이용한 내삽법으로 모든 부채널의 전달 함수를 얻는다. 또한 변환 영역에서 저대역 여파를 통해 받은 파일럿 신호에 존재하는 가산성 백색 정규 잡음의 영향을 상당히 줄일 수 있다. 이 때 저대역 여파기의 차단 주파수는 채널의 다중경로 수에 따라 정해진다. 같은 방법을 이용한 내삽법을 시간축으로 적용하여 시간에 따라 변하는 부채널의 채널 응답을 얻을 수 있다. 이 논문에서는 여러 가지 내삽법에 대한 평균 제곱 오차 성능을 수식적으로 제시한다. 제안한 저대역 여파를 결합한 내삽법을 쓰면 채널의 통계적 특성에 관한 정보 없이, 그리고 훨씬 적은 계산량으로 선형 최소 평균 제곱 오차 추정기와 비슷한 성능을 얻는다. 레일리 감쇄 채널에 대한 모의 실험을 통해 같은 비트 오류율에 대한 신호 대 잡음 비의 이득이 있음을 보인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.243-245
• /
• 1998

미래의 셀룰라 이동통신망은 멀티미디어 데이터 서빗를 제공하기 위해서 높은 대역폭이 필요하기 때문에 셀의 크기가 수십 미터 내오인 피코 실(pico cell)로 구성되는 피코 셀 망이 될 것이다. 이와 같은 피코 셀룰라 망에서는 이동통신자의 우치 변화에 따른 handoff 처리 회수가 상대적으로 증가하므로, handoff 처리로 인한 망부하가 늘어났고, handoff처리 지연으로 인하여 사용자는 중단없는 연결서비스 (seamless connection service)를 받지 못할 수도 있다. 본 논문은 VT-CSMA방식을 응용한 기법을 새로운 handoff방식으로 제안한다. 이 기법은 handoff에서 사용하고 delay time virtual clock 과 real clock 의 2개의 clock을 갖도록 함으로써, 빠른 속도로 이동하는 호는 느린 속도로 이동하는 호보다 상대적으로 짧은 시간 내에 handoff가 처리 되도록 한다. 모의 실험 결과는 VT-CSMA기법을 응용한 새로운 방식이 기존 CDMA 방식에서 drop되는 호를 많이 줄이는 효과가 있음을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.912-916
• /
• 2004

The home network is the technique to guarantee a safe, economical, socially integrated, and healthy life to the family and it provides domestic safety, instrument control, controllable energy and health monitoring by the connection of the home appliances using wired and wireless networks. A home control system has been developed for managing and controlling home appliances. This paper designs the broadband PLC home controller using broadband PLC technology which can save much cost at a network infrastructure using the existing power line at a home and design the USB home controller using USB technology which is low cost and has many goods with it. And the embedded home server manages those. The CDMA module provides mobile functions to the home control system in this paper. And we choose the OSGi specification which is compatible with other home middleware and can accept various communication techniques of home network

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.571-574
• /
• 2002

In a recent wireless network environments, dynamic host configuration protocol (BHCP) service is used to assign IP addresses to mobile terminals. In IPv6 networks, it is necessary to introduce the concept of handoff to support a seamless service to mobile terminals. In a general soft handoff technique used by code-division multiple acces (CDMA) communication systems, the powers received to base station are simply compared to determine which base station will handle the signal to and from each mobile termins. However, in IPv6 network, to transmit data-oriented services, it is necessary to support an enhanced soft handoff technique with more security and quality of service. In this paper, we propose a scheme to reduce a signaling process of handoff in IPv6 network. Also, we propose a technique to reduce wasted reservation resources and to guarantee quality of service (QoS) using DHCP.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.201-204
• /
• 2000

In this paper, a wireless engineering field tool based on WCDMA is designed and implemented. Emerging requirements for higher rate data service and better spectrum efficiency are identified for the third generation mobile radio systems. The proposed WCDMA field tool is used for improving the quality of WCDMA service. The current position and time are measured and recorded with CDMA field data. With the system a user can observe the spatial distribution of the field data. For providing concurrency, the system is decomposed of four units and each unit is implemented by using threads.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.1036-1042
• /
• 2007

현재 우리나라 상수도 시스템의 경우 대부분 각 가정집에 설치된 계량기의 측정값을 검침원이 육안으로 확인, 수기 기입 방법으로 수도 검침이 이루어지고 있다. 이러한 방법은 사생활 침해 및 범죄로 이어질 가능성이 있다. 본 논문에서는 상수도의 검침데이터를 무선주파수 및 코드분할다중접속방식을 사용하여 송수신 가능한 네트워크 망을 구축, 수신된 데이터 값을 활용하여 각 상수도 수용가의 사용량을 자동으로 검침하여 청구 내역서까지 작성해 주는 상수도 자동검침시스템을 소개한다. 상수도 자동검침시스템은 검침을 디지털화하고 이를 무선송신 가능한 검침기와 검침기의 검침데이터 값을 송수신 할 수 있는 중계기 및 집중기, 그리고 CDMA 망을 통한 검침데이터를 수신할 수 있는 애플리케이션 서버 등을 구축하여 지역 내 원격 검침 네트워크 망을 구축하는 것을 포함하고 있다. 본 연구의 시스템은 화재, 가스, 전기 등의 검침데이터를 통합으로 수집하여 데이터를 관리하는 통합 시스템으로 확대가 용이하며 이러한 상수도 자동검침시스템은 누수 및 독거노인 등의 생활보호대상자의 안전을 확인하는 기초 정보로도 활용할 수 있다.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1998.05a
• /
• pp.22-22
• /
• 1998

This paper reviews the benefits of users participation in IMT-2000 standardization by the creation of users coalitions, focusing in particular on phased standards strategy necessary for the evolutionary approach from second generation to third generation systems. It first presents in detail the current status of IMT-2000 standardization progress occurring at each regional standard body including TIA of US, ETSI of Europe, TTA of Korea and ARIB of Japan. With this clear understanding of standardization situations worldwide, we may be able to come up with our standards strategies related to IPR issues and efficient standard-setting mechanism between manufacturers and service providers. In addition, this paper addresses the necessity for phased licensing of IMT-2000 service in order to avoid the high cost of new infrastructures and ensure an acceptable financial investment returns for existing cellular and PCS service providers. An author hopes that this paper can provide the adequate standardization directions of IMT-2000 to satisfy the varying regional and global market requirements.

• Journal of Computing Science and Engineering
• /
• v.6 no.4
• /
• pp.310-319
• /
• 2012

Next generation wireless receivers demand low computational complexity algorithms with high computing power in order to perform fast signal detections and error estimations. Several signal detection and estimation algorithms have been proposed for next generation wireless receivers which are primarily designed to provide reasonable performance in terms of signal to noise ratio (SNR) and bit error rate (BER). However, none of them have been chosen for direct implementation as they offer high computational complexity with relatively lower computing power. This paper presents a low-complexity power-efficient algorithm that improves the computing power and provides relatively faster signal detection for next generation wireless multiuser receivers. Measurement results of the proposed algorithm are provided and the overall system performance is indicated by BER and the computational complexity. Finally, in order to verify the low-complexity of the proposed algorithm we also present a formal mathematical proof.