• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.921-927
• /
• 2006

The current DGPS technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM(Interface Module) replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.89-95
• /
• 2004

CDMA is the way that more than one users can share the time and frequency at the same time and connect with multiple access in mobile communication. Multiple Access is indispensible for mobile communication because the limited frequency is able to be used by many users in mobile communication. CDMA is also applied to home network, military, business and medical sectors. This paper, presents a users should share limited frequency resource. CDMA module implemented with 8-layer PCB which consists of the Slice-board circuit, keeping Radio frequency characteristics and a slot type connector.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.38-42
• /
• 2010

This paper shows that beamfoming module deign to adapt smart antenna system in CDMA2000 environments. The designed beamfroming module has been implemented on a general-purpose DSP as a test-bed to confirm the superior performances based on real-time processing. From the various simulation result, it is confirm that beamforming module is provide a superior beampattern in smart antenna system.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.53-60
• /
• 2005

In this paper, we developed a mobile fingerprint identification system using wireless LAN based on IEEE 802.11 or mobile networks based on CDMA. The proposed system contains a server system to register fingerprints and ID data, clients system which is PDA with WLAN or CDMA module and fingerprint identification module.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2674-2685
• /
• 1997

In this paper, the design and imprlementation of dual-band power amplifier which is used as a critical part for mobile phone to be simultaneously working at a dual band, 800MHz CDAM and PCS frequency band is described. DC operating point of power FET is limited to Class-B to enable long talk time considering that the tyupical power range of CDMA phones in working is around 10 to Class-B to enable long talk time considering that the typical power range of CDMA phones in working is around 10 to 15dBm, i.e., liner range. The power amplifier which employs two GaAs FETs with good linerity at a low operating point has duplexer cuplexer circuit to separate two frequency bands at input and output stage. Electromagnetic analysis for via holes and coupling between narrow transmission lines is included to design a circuit. Moduld size of 0.96CC($22{\times}14.5{\times}3mm^3$) and maximum module current of 130mA at output power range, 10 to 15dBm are attained. The power amplifer module has achieved ACPR performance with 2 to 3dB marging from IS-95 requirement at output powers, 23.5dBm for PCS and 28dBm for 800MHz CDMA respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1602-1609
• /
• 1998

In this paper, the design and implementation of the novel RF front end circuit for CDMA based PCS phone is described. This novel scheme is realized by building the power amplifier module combined with duplexer. The dielectric filters which are parts of duplexer are broken up and relocated into the module. Electromagnetic analysis for via holes and coupling between narrow transmissio lines is icluded to design a circuit. The combined moule has been minimaturized to be as small as 1.5CC. It has satisfied IS-95 requirements for linearity performances of CDMA signal at 24-dBm output power as well as played apart as a duplexer. The operating current of about 95mA has been saved owing to both rearranging dielectric filters and limiting operating point to class-B by considering real working power range of CDMA phones.

• The Magazine of the IEIE
• /
• v.30 no.4
• /
• pp.422-422
• /
• 2003

본 논문에서는 기존의 기지국과 W-CDMA 시스템을 상호 연동하기 위한 SDR(Software Defined Radio) 기반의 멀티 밴드 디지털 IF 모듈 구현에 대해 소개한다. 하드웨어 플랫폼상에 테스트 및 시험 검증하기 위해서 크게 광대역 ADC, DAC, FPGA로 구성하였으며, FPGA 내에 디지털 필터 및 NCO 등의 응용 소프트웨어는 VHDL로 코딩하였다. 디지털 필터는 FPGA의 허용 자원을 고려하여 인터폴레이션 및 데시메이션을 위한 폴리페이즈 필터 뱅크로 구현하였다. 또한 송신단에서는 이미지 성분을 제거하기 위해 2단의 DCQM(Digital Complex Quadrature Modulation)을 적용하였으며, 이때 적용되는 NCO(Numerically Controlled Oscillator)는 1/4주기의 LUT를 사용하여 설계하였다. 수신단에서는 IF 단에 SAW 필터를 사용하지 않기 때문에 W-CDMA의 블록커 규약에 준하면서 근접 채널을 제거하기 위한 고출력의 감쇄 특성을 갖는 필터를 설계하였다. 본 논문에서는 컴퓨터 시뮬레이션 결과와 스펙트럼 분석기를 통해 측정된 결과를 비교 분석하였으며 이에 대한 디지털 IF 모듈의 성능을 검증하였다.

• The Magazine of the IEIE
• /
• v.30 no.4
• /
• pp.76-88
• /
• 2003

본 논문에서는 기존의 기지국과 W-CDMA 시스템을 상호 연동하기 위한 SDR(Software Defined Radio) 기반의 멀티 밴드 디지털 IF 모듈 구현에 대해 소개한다. 하드웨어 플랫폼상에 테스트 및 시험 검증하기 위해서 크게 광대역 ADC, DAC, FPGA로 구성하였으며, FPGA 내에 디지털 필터 및 NCO등의 응용 소프트웨어는 VHDL로 코딩하였다. 디지털 필터는 FPGA의 허용 자원을 고려하여 인터폴레이션 및 데시메이션을 위한 폴리페이즈 필터 뱅크로 구현하였다. 또한 송신단에서는 이미지 성분을 제거하기 위해 2단의 DCQM(Digital Complex Quadrature Modulation)을 적용하였으며, 이때 적용되는 NCO (Numerically Controlled Oscillator)는 1/4주기의 LUT를 사용하여 설계하였다. 수신단에서는 IF 단에 SAW필터를 사용하지 않기 때문에 W-CDMA의 블록커 규약에 준하면서 근접 채널을 제거하기 위한 고출력의 감쇄 특성을 갖는 필터를 설계하였다. 본 논문에서는 컴퓨터 시뮬레이션 결과와 스펙트럼 분석기를 통해 측정된 결과를 비교 분석하였으며 이에 대한 디지털 IF 모듈의 성능을 검증하였다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.1
• /
• pp.17-24
• /
• 2008

This paper describes the measurements that provide a characterization of the code-domain channels of a CDMA base station transmitter. One of the measurements, called code-domain power(CDP), provides the distribution of power in the code domain channels. This measurement can be used to verify that the various channels are at expected power levels and to determine when one code channel is leaking energy into the other code channels. We develop module of CDP measurement in the CDMA system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1932-1938
• /
• 1999

In this paper, planar duplexer module combined with power amplifier is described. This new scheme is to enhance power efficiency as well as to minimize the size of RF circuit in CDMA phone. Each filter which was a part of duplexer, was realized with planar type and rearranged into the power amplifier module on the multilayer board. Each electrical specifications of existing power amplifier and duplexer were satisfied. Especially, ACPR performances measured at output power of 24dBm which is 2dB lower than that of a conventional one, meet IS-95 for a power amplifier of CDMA phone. Overall current about 80mA has been successfully saved as a result of new scheme. In addition, the module size has been reduced to be as small as 1.08CC.