• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.493-494
• /
• 2008

LGP for the small size exit was designed and fabricated. Pattern design method, which is the most important thing in the design of the LGP, was converted from the line type into the cross type. By using this new method, the brightness unevenness, which was very difficult problem to be solved in V-cutting method, was improved. Currently products had 78% of the brightness uniformity but newly developed product in this research had 87% of the brightness uniformity. Also the optimized design rule provided the improvement of the brightness of the LGP developed in this study, that has brightness of $871cd/m^2$ whichwas 98% higher than the common products.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.91-98
• /
• 2006

A light guide panel (LGP) is an element of the LCD back light unit, which is used for display devices. In this study, the laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected. A Web-based design tool was developed to generate patterns of light guide panel at any location, and the tool may assist the designer to develop optimized patterns. Topcon-BM7 was used for luminance measurement of each specimen with $100mm{\times}100mm$ area. By Taguchi method optimized levels of each parameters were found, and luminance of $3523cd/cm^2$ and uniformity of 92% were achieved using the laser machined BLU.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.2
• /
• pp.47-54
• /
• 1999

SRB(Sulfate Reducing Bacteria) converts sulfate into sulfide using an organic carbon source as the electron donor. The sulfide formed precipitates the various metals present in the AMD (Acid Mine Drainage). This study is the fundamental research on heavy metal removal from AMD using SRB. Two completely mixed anaerobic reactors were operated for cultivation of SRB at the temperature of $30^{\circ}C$ and anaerobic batch reactors were used to evaluate the effects of carbon source, COD/sulfate($SO_4^=$) ratio and alkalinity on sulfate reduction rate and heavy metal removal efficiency. AMD used in this study was characterized by low pH 3.0 and 1000mg/l of sulfate and dissolved high concentration of heavy metals such as iron, cadmium, copper, zinc and lead. It was found that glucose was an organic carbon source better than acetate as the electron donor of SRB for sulfate reduction in AMD. Amount of sulfate reduction maximized at the COD(glucose)/sulfate ratio of 0.5 in the influent and then removal efficiencies of heavy metals were 97.5% of Cu, 100% of Pb, 100% of Cr, 49% of Mn, 98% of Zn, 100% Cd and 92.4% of Fe. Although sulfate reduction results in an increase in the alkalinity of the reactor, alkalinity of 1000mg/1 (as $CaCo_3$) should be should be added continuously to the anaerobic reactor in order to remove heavy metals from AMD.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.2
• /
• pp.92-98
• /
• 2004

The adsorption and desorption of Pb, Cd, Co, Zn, Cr, Co, Ni, and Mo on the waste Undaria sp. were studied. Except for Pb. the mono adsorption rate for all heavy metals were lower than that of the heavy metals mixed. However, the adsorption capacity of the heavy metals by 1g of biosorption, in mixed heavy metals increased According to FT-IR analysis of the biosorbent after heavy metal biosorption, the replacement of the functional group by the heavy metals ions could be confirmed and the inverted peaks became larger after heavy metals adsorption. The adsorption equilibrium of heavy metals was reached in about 1 hour. The equilibrium parameters were determined based on Langmuir and Freundlich isotherms. The affinity of metals on the biosorbent decreased in the following order: Pb>Cu>Cr>Cd>Co. The desorption rate decreased in the following sequence: NTA>$H_2SO_4$>HCl>EDTA. The desorption rate of heavy metals by NTA increased with increase in the concentration from 0.1 to 0.3% but the desorption rate became constant beyond 0.3%. Therefore, it represented that desorption rate of heavy metals was suitable under optimized condition ($30^{\circ}C$, pH 2 and 0.3% NTA solution) and was fast with 80% or more the uptake occurring within 10 min of contact time.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.77-84
• /
• 2006

This study was conducted to find a system for screening organic resources with 16 species, 62 samples which were selected to randomizing point from city, province and industrial areas in the whole country. Content of organic matters were $65.3%{\sim}98.0%$ in all samples so that they were largely over than 60%, raw material regulation of compost. Concentrations of total nitrogen and total phosphorus were $0.7{\sim}4.8%\;and\;0.8{\sim}5.0$, they could look for effect of the nitrogen and phosphorus supply as a raw material of compost. In case of 8 elements concentrations of heavy metal, they were too high to use as raw materials of compost which were over to regulation limit in Cu, Cr, Ni, and As from fiber industry, Ni from food company and leather industry, and the others are adapt to limit levels. HEM contents fro the highest to $113mg\;kg^{-1}$ from liber industry and PAHs content were the highest to $3,462ug\;kg^{-1}$ from paper-mill manufacture. Distribution of PAHs concentiations were naphthalene>phenanthrene>pyrene>fluoroanthene>acenaphthene. $Microtox{(R)}\;EC_{50}$ values for bioassay were pharmaceutical company>paper-mill manufacture>industrial area sewage sludge>fiber industry>urban sewage sludge>metropolitan sewage sludge. HEM between Zn, Cu, and Ni was significant at the 99% and between Cd was significant at the 95%, Microtox between Hg and BEM significant at the 95%.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.291-295
• /
• 1998

Changes of chemical components and natural supplies by precipitation at agricultural zone in Chinan area of Chonbuk province from May 1, 1997 to April 30, 1998 were investigated. pH of precipitation ranged $6.44{\sim}7.24$ and EC showed $14.23{\sim}30.67{\mu}S/cm$. The $total{\sim}N$, NH4-N and NO3-N were $1.43{\sim}10.14$, $0.57{\sim}4.39$, and $0.18{\sim}1.69㎎/L$ respectively. The content of total-P showed $0.015{\sim}0.087㎎/L$ but ortho-P was not detected. The content of suspended solid, $Ca^{++}$, $Mg^{++}$, $Na^+$ and $K^+$ showed $3.6{\sim}15.3$, $0.37{\sim}1.66$, $0.17{\sim}0.52$, $0.22{\sim}0.87$, and $0.17{\sim}0.58㎎/L$. The content of SO42- and Cl- showed $3.37{\sim}014.47㎎/L$ and $1.02{\sim}7.24㎎/L$ respectively. Only Cu and Zn of heavy metals were detected $0{\sim}0.019㎎/L$ and $0.009{\sim}0.098㎎/L$ but Cd, Cu, Ni and Cr were not detected. Natural supplies of chemical components were 39.48㎏/ha/yr of total-N, 21.82㎏/ha/yr of $NH_4-N$, 6.90㎏/ha/yr of $NO_3-N$ and 0.68㎏/ha/yr of total-P. Also $Ca^{++}$, $Mg^{++}$, $Na^+$, $K^+$, $SO_4^{2-}$ and $Cl^-$ were supplied 14.46, 5.00, 7.26, 5.46, 98.76 and 31.16㎏/ha/yr respectively. Only of heavy metals were supplied 0.024㎏/ha/yr of Cu and 0.044㎏/㏊/yr of Zn.

• Journal of Life Science
• /
• v.20 no.5
• /
• pp.717-722
• /
• 2010

The safety of animal feed was evaluated by analyzing the levels of heavy metals (Pb, Cr, Cd, As, Se and Ag) in cattle, swine, and poultry feeds and the levels of Cu, Zn and P in swine feed. Feeds used in the analysis were produced in Korea from 2004 through the first half of 2007. The results of the study revealed that, with the exception of Cd, the concentration of heavy metals were much lower than the Minimum Regulation Levels (MRLs). However, the Cd concentration exceeded the MRL in 1 of 987 swine feed samples in 2005, as well as in 4 of 1,239 swine feed samples and 1 of 778 poultry feed samples in 2006. The levels of Cu, Zn and P in swine feed were compared with the swine breeding standard. The results of this analysis revealed that the Cu concentrations in the samples exceeded the MRL for growing pigs by 0.97%, and that for finishing and breeding pigs by 9.9%. In addition, the Cu levels (80.98 ppm for piglet, 44.82 ppm for growing pigs, 19 ppm for finishing and breeding pigs) in swine feed showed higher levels compared to 3.5-6.0 ppm, which is the Cu requirement for swine. Furthermore, the results of the Zn analysis revealed that the samples exceeded the MRL for piglets, growing pigs, and finishing and breeding pigs by 5.7%, 7.7%, and 9.3%, respectively. Finally, the average concentration of P in swine feed was 0.74%, which is almost the same as the phosphate requirement for swine.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.517-524
• /
• 2009

We collected 177 fishes representing 53 species of fish from the eastern (Pohang), western (Gunsan), and southern (Tongyeong) coasts of Korea, and measured their heavy metal contents. The mean recoveries of the heavy metals extracted from cod muscle (certified reference material, CRM) were $88.7{\sim}100.6%$. The mean levels of the heavy metals in the samples taken from the edible portion of each fish were high in the order of Zn ($8.981{\pm}4.835{\mu}g/g$), Cu ($0.755{\pm}0.507{\mu}g/g$), and Mn ($0.433{\pm}0.699{\mu}g/g$), which are necessary metals in the human body, and then followed by Cr ($0.206{\pm}0.181{\mu}g/g$), Ni ($0.081{\pm}0.110{\mu}g/g$), Pb ($0.038{\pm}0.046{\mu}g/g$), Cd ($0.017{\pm}0.023{\mu}g/g$). The average daily intakes of the heavy metals by the fishes were as follows: Cd (0.81 ${\mu}g$), Cr (9.98 ${\mu}g$), Cu (36.63 ${\mu}g$), Mn (21.01 ${\mu}g$), Ni (3.93 ${\mu}g$), Pb (1.84 ${\mu}g$) and Zn (435.58 ${\mu}g$). The average weekly intakes of Cd, Cu, Pb and Zn by the fishes were 1.35%, 0.12%, 0.86%, and 0.73% respectively, as compared with PTWI (Provisional Tolerable Weekly Intakes) established by FAO/WHO Expert Committee for Food Safety Evaluation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.409-415
• /
• 1999

To evaluate the purification capacity of pollutants (COD, $PO_4^{3-}-p$, $NO_3^{-}-N$, Cu, Cd, Pb) in the three tidal flats, Eueunri, Gyewhado, Chunjangdae, the experiments were carried out with the batch reactor equipped with artifical tidal flats. Eueunri tidal flat was $98.8\%$ content of silt and clay and Chungjangdae was $97.84\%$ content of sand. The organic matters (I.L., $COD_{sed}$, POC) in Eueunri tidal flat were 2$\~$8 times higher than other tidal flats. The purification capacity of COD was 0.75 kg/ha/12 hr in Eueunri, 0.60 kg/ha/12 hr in Gyewhado and 0.55 kg/ha/12 hr in Chunjangdae. The mean purification capacity of COD in three tidal flats was 1.27 kg/ha/day. The calculated purification capacity of COD was 25.4 ton/day in the disappeared tidal flat areas (20,000 ha) of the Saemangeum reclamation. The purification capacity of phosphorus was 0.21 kg/ha/12 hr in Gyewhado, 0.39 kg/ha/12 hr in Eueunri and 0.22 kg/ha/12hr in Chunjangdae. The nitrate was 0.53, 0.74 and 0.43kg/ha/12hr, respectively. The purification capacity of heavy metals (Cu, Cd, Pb) were 88.9g/ha/12hr, 11.0g/ha/12hr, 1.7g/ha/12hr in Gyewhado, 89.1g/ha/12hr, 18.0g/ha/12hr, 2.6g/ha/12hr in Eueunri and 55.3g/ha/12hr, 18.0g/ha/12hr, 2.1g/ha/12hr in Chunjangdae, respectively. Accordingly, the purification capacity of pollutants in Eueunri tidal flat with high contents of organic matter were higher than other tidal flats. So, the purification capacity of pollutants were affected by physical and/or chemical characteristics of tidal flats.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.8
• /
• pp.574-582
• /
• 2012

This study presents the concentrations of the polycyclic aromatic hydrocarbons (PAHs) listed as priority pollutants by United States Environmental Protection Agency (US EPA), in 98 sludges from 54 industrial wastewater treatment facilities of South Korea. The mean concentrations of ${\Sigma}_{16}PAHs$ were ranged from 32.5 ${\mu}g/kg-dw$ to 1189.3 ${\mu}g/kg-dw$ by industries, and the highest content was found in the petrochemical industry, followed by chemical, clothing manufacturing and dying, pulp and papermaking, secondary wastewater treatment, and food/beverage producing industries. Comparisons to the EU and Danish standards of ${\Sigma}_{16}PAHs$ in sewage sludge for land application showed only two samples (one from petrochemical, and the other from chemical industry) exceeded the limits. ANOVA test with PAH concentrations as variables revealed no statistically significant influences by industrial types and sampling time (i.e., seasonal variations). Pearson correlations between individual PAHs showed strong relationships (r>0.7) among 4-ring PAHs. Concentrations of acenaphthylene, anthracene, fluoranthene, benzo(a)anthracene, benzo(f)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene presented strong correlations to ${\Sigma}_{16}PAHs$. Principal component analysis discriminated entire samples into three groups by two principal components (PC1 and PC2) with 70% of data variations, in which industrial types were not of importance, but a dominance of certain PAHs. Samples in group-I, which is high PC1 and low PC2, were characterized by a dominance of 2-ring PAHs, and in group-II, PC1 and PC2 showed a linear relation, was dominant 4-ring PAHs. Group-III with low PC1 and high PC2 includes 17 samples showing a noticeably high contribution of 3-ring PAHs to ${\Sigma}_{16}PAHs$. This study provides concentrations of PAHs in industrial sludges collected from a wide variety of sources (six industrial types) and two seasons of sampling events, and the comparison of ${\Sigma}_{16}PAHs$ with other studies are also discussed.