• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.300-308
• /
• 2018

The contribution analysis of various external aeroacoustic noise sources to interior noise is important, enabling to design an automobile with a low interior noise level. With a new technique, the CD (Cholesky Decomposition), it is proposed to decompose an overall interior noise spectrum into multiple spectra, each representing the contribution of a specific noise source to the interior noise. In order to validate this method, three kinds of experiments were conducted. Furthermore, it is proposed to improve the CD-based contribution analysis method to be integrated with existing exterior microphone arrays in the wind tunnel. This method was validated with an experiment with two speakers.

• Journal of Food Hygiene and Safety
• /
• v.13 no.2
• /
• pp.129-134
• /
• 1998

To develop an enzyme-linked immunosorbent assay (ELISA) for nivalenol (NIV), we produced polyclonal antibodies against tetraacetyl nivalenol (Ac4-NIV) and established ELISA conditions. Ac4-NIV-hemisuccinate conjugated to bovine serum albumin (Ac4-NIV-HS-BSA) was immunized with Freund's adjuvants into rabbits subcutaneously several times. By use of the antiserum showing the highest titer and Ac4-NIV-HS-HRP conjugate, we established competitive direct ELISA (cdELISA). Standard curve of cdELISA showed that the detection range of Ac4-NIV was about 10~5,000 ng/ml (ppb). The cross-reactivities of the polyclonal antibody towards Ac4-NIV and acetyl T-2 were 100 and 70% respectively, and those towards NIV, deoxynivalenol, 3-acetyl deoxynivalenol, 15-acetyl deoxynivalenol, triacetyl deoxynivalenol, fusarenonX, and T-2 were less than 0.1%. When cdELISA was applied to NIV-spiked corns followed by extraction with 70% acetonitrile and acetylation with acetic anhydride in pyridine, the recovery rates of the Ac4-NIV were 108, 143, and 70% (average, 107%) in the levels of 100, 300, and 1,000 ng/g (ppb), respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.327-328
• /
• 2012

의료분야의 진단 방사선 장비는 초기의 필름방식 및 카세트에서 진보되어 현재는 디지털방식의 DR (Digital Radiography)이 널리 사용되며 이에 관한 연구개발이 활발히 진행 되고 있다. DR은 일반적으로 직접방식과 간접방식으로 나눌 수 있다. 직접방식의 원리는 X선을 흡수하면 전기적 신호를 발생 시키는 광도전체(Photoconductor)를 사용하여 광도전체 양단 전극에 전압을 인가하여 전기장을 유도한 가운데, X선을 조사하면 광도전체 내부에서 전자-전공쌍(Electron-hole pair)이 생성된다. 이것은 양단에 유도된 전기장의 영향으로 전자는 +극으로, 전공은 -극으로 이동하여 아래에 위치한 하부기판을 통하여 이미지로 변조된다. 간접방식은 X선을 흡수하면 가시광선으로 전환하는 형광체(Scintillator)를 사용하여 조사된 X선을 형광체에서 가시광선으로 전환하고, 이를 Photodiode와 같은 광변환소자로 전기적 신호로 변환하여 방사선을 검출하는 방식을 말한다. 본 연구에서는 직접방식에서 이용되는 광도전체 중 흡수효율이 높고 Mobility가 뛰어난 CdTe를 선정하여 PVD (Physical vapor deposition)방식으로 300 m의 두께를 목표로 하여 증착을 진행하였다. Chamber의 진공도가 $2.5{\times}10^{-2}$ Torr로 도달 시점부터, Substrate와 Boat에 열을 가하였다. Substrate온도는 $350^{\circ}C$, Boat온도는 $300^{\circ}C$도로 설정하여 11시간 동안 진행하였다. Substrate온도는 $303^{\circ}C$, Boat온도는 $297^{\circ}C$도부터 증착이 시작되어 선형적인 증가세 추이를 나타내어 Substrate 및 Boat온도가 설정 값에 도달 하였을 때, $25{\sim}34.4{\AA}/s$ 증착율을 나타내었다. 하부전극의 물질에 따른 CdTe증착 효율성 평가를 진행한 후, 그에 따른 전기적 특성을 알아보았다. 하부전극의 물질로는 ITO (Indium Tin Oxide), Parylene이 코팅 된 ITO, Au, Ag를 사용하였다. 하부전극의 물질 상단에 Thermal Evaporation System을 사용하여 CdTe를 증착한 후, Cdte 상단에 Au를 증착 시켜 민감도(Sensitivity)와 암전류(Dark current)를 측정하였다. 증착 결과 ITO와 Ag상단에 증착시킨 CdTe박막은 박리가 되었고, Au와 Parylene이 코팅 된 ITO에는 CdTe박막이 안정적이게 형성이 되었다. 이 두 샘플에 대하여 동일한 조건으로 민감도와 암전류를 측정 시, Parylene이 코팅된 ITO를 하부전극으로 사용한 CdTe박막은 0.1021 pA/$cm^2$의 암전류와 1.027 pC/$cm^2$의 민감도를 나타낸 반면, Au를 하부전극으로 사용한 CdTe박막은 0.0381 pA/$cm^2$의 암전류와 1.214 pC/$cm^2$의 민감도를 나타내어 Parylene이 코팅된 ITO보다 우수한 전기적 특성을 나타내었다. 따라서 Au는 CdTe박막 증착 시, 하부전극 기판으로서 뛰어난 특성을 나타내는 것을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.345-348
• /
• 1999

The properties of Fe ions in the $ CdFe_2$$O_4$ and $CdFeAlO_4$ were investigated using the Mossbauer spectroscopy, in the temperature range from 300K to 900K. The calculated Debye temperature, recoil free fraction, mean square displacement and velocity are, 476.5K, 0.835, 3.39$\times$10\ulcorner$\textrm{cm}^2$, and 1.11$\times$10\ulcorner$\textrm{cm}^2$sec$^2$for Fe ions in the $CdFe_2$$O_4$ and 369.0K, 0.741, 5.65$\times$10\ulcorner$\textrm{cm}^2$ and 1.33$\times$10\ulcorner$\textrm{cm}^2$/$sec^2$in the $CeFeAlO_4$. The difference of the properties in the two samples were explained by the variation of the Fe\ulcorner-O\ulcorner bonding length with the substituted Al ions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.3
• /
• pp.18-23
• /
• 1978

In order to improve the efficiency of Cu2-xS-CdS PN junction type solar cell, a method of reducing the series resiatance is considered. In the fabrication of the thin film of Cu2-xS, what has the largest value of conductivity is fabricated at 250 $^{\circ}C$. The thin film of CdS which has beer fabricated at the temperature 250-30$0^{\circ}C$ of the substrate and 800-85$0^{\circ}C$ of evaporating material has the largest value of conductivity and also fairly good photoelectric characteristics. Therefore, the evaporated thin aim type CdS solar cell has been fabricated at the temperature 25$0^{\circ}C$ of the substrate and 800-85$0^{\circ}C$ of the evaporating material, and its efficiency is measured to he 6%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.399-399
• /
• 2012

II-V 족 화합물 반도체인 황화카드뮴(CdS)은 상온에서 2.42 eV의 밴드갭을 갖는 직접 천이형 물질로서 CdTe 또는 $CuInSe_2$와 같은 박막형 태양전지의 투과층(window layer)으로 널리 사용되고 있다. CdS 박막은 전자빔 증착법(e-beam evaporation), 화학용액증착법(chemical bath deposition), 열분해법(spray pyrolysis), 스퍼터링법(sputtering) 등으로 제작되고 있다. 이 중 스퍼터링법의 경우, 다른 증착법에 비해 조작이 간단하고 넓은 면적에서 균일한 박막을 증착할 수 있을 뿐만 아니라, 박막두께 조절이 용이하다. 따라서 본 실험에서는 RF 마그네트론 스퍼터링법으로 증착된 CdS 박막의 기판온도 및 열처리 온도변화에 따른 구조적 및 광학적 특성을 조사하였다. 기판은 RCA 기법으로 세정된 Corning Eagle 2000 유리 기판을 사용하였다. 박막 공정은 초기 진공 $1{\times}10^{-6}Torr$ 상태에서 20 sccm의 Ar 가스를 주입하고 100 W의 RF 파워, 7 mTorr의 공정 압력에서 기판 온도를 $200^{\circ}C$부터 $500^{\circ}C$까지 변화시키면서 수행하였다. 증착된 CdS 박막은 질소 분위기의 가열로(furnace)를 이용해 $300-500^{\circ}C$ 온도에서 30분간 열처리되었다. 시료들의 표면 형상은 scanning electron microscope를 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer를 사용하여 400-1,000 nm 파장영역에서의 투과율을 측정하였다. 그리고 X-선 회절분석(X-Ray Diffraction)으로 결정구조를 조사하고 결정립 크기를 산출하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.615-624
• /
• 2011

last few decades. In this study, the lyophilized cells of Pleurotus eryngii (mushroom) were used as an inexpensive biosorbent for Cd(II) and Pb(II) removal from aqueous solutions. The effect of various physicochemical factors on Cd(II) and Pb(II) biosorption such as pH (2.0-7.0), initial metal concentration ($0.0-300mg\;L^{-1}$), temperature, fungal biomass and contact time (0-120 min) were studied. Optimum pH for removal of Cd(II) and Pb(II) was 6.0, and the contact time was 45 min at room temperature. The nature of biosorbent and metal ion interaction was evaluated by Infrared (IR) spectroscopic technique. IR analysis of mushroom biomass revealed the presence of amino, carboxyl, hydroxyl and methyl groups, which are responsible for biosorption of Cd(II) and Pb(II). The maximum adsorption capacities of P. eryngii for Pb(II) and Cd(II) calculated using Langmuir adsorption isotherm were 82.0 and $16.13mg\;g^{-1}$, respectively. The adsorption isotherms for two biosorbed heavy metals were fitted well with Freundlich isotherm as well as Langmuir model with correlation coefficient ($r^2$>0.99). Thus, this study indicated that the P. eryngii is an efficient biosorbent for the removal of Cd(II) and Pb(II) from aqueous solutions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.33-35
• /
• 2008

We have fabricated and evaluated new high efficiency green light emitting phosphorescent devices with an emission layer of $[TCTA_{1/3}TAZ_{2/3}/TAZ]:Ir(ppy)_3$. The whole experimental devices have the basic structure of $2-TNATA(500 {\AA})/NPB(300{\AA})/EML(300{\AA})/BCP(50{\AA})/SFC137(500{\AA})$ between anode and cathode. We have also fabricated conventional phosphorescent devices with emission layers of $(TCTA_{1/3}TAZ_{2/3}):Ir(ppy)_3$ and $(TCTA/TAZ):Ir(ppy)_3$ and compared their electroluminescence characteristics with those of the device with an emission layer of $(TCTA/TCTA_{1/3}TAZ_{2/3}/TAZ):Ir(ppy)_3$. The current density(J), luminance(L), and current efficiency($\eta$) of the device with an emission layer of $(80{\AA}-TCTA/90{\AA}-TCTA_{1/3}TAZ_{2/3}/130{\AA}-TAZ):10%-Ir(ppy)_3$ were 95 $mA/cm^2$, 25000 $cd/m^2$, and 27 cd/A at an applied voltage of 10V, respectively. The maximum current efficiency was 52 cd/A under the luminance of 400 $cd/m^2$. The peak wavelength and FWHM(full width at half maximum) in the electroluminescence spectral were 513nm and 65nm, respectively. The color coordinate was (0.30, 0.62) on the CIE (Commission Internationale de l'Eclairage) chart. Under the luminance of 15000 $cd/m^2$, the current efficiency of the device with an emission layer of $(80{\AA}-TCTA/90{\AA}-TCTA_{1/3}TAZ_{2/3}/130{\AA}-TAZ):10%-Ir(ppy)_3$ was 34 cd/A, which has been improved 1.7 times and 1.4 limes compared to those of the devices with emission layers of $(300{\AA}-TCTA_{1/3}TAZ_{2/3}): 10%-Ir(ppy)_3$ and $(100{\AA}-TCTA/200{\AA}-TAZ):10%-Ir(ppy)_3$, respectively.

• Journal of Ginseng Research
• /
• v.37 no.3
• /
• pp.300-307
• /
• 2013

20S-dihydroprotopanaxatriol (2H-PPT) is a derivative of protopanaxatrol from ginseng. Unlike other components from Panax ginseng, the pharmacological activity of this compound has not been fully elucidated. In this study, we investigated the modulatory activity of 2H-PPT on the cellular responses of monocytes and macrophages to understand its immunoregulatory actions. 2H-PPT strongly upregulated the release of radicals in sodium nitroprusside-treated RAW264.7 cells and the surface levels of costimulatory molecule CD86. More importantly, this compound remarkably suppressed nitric oxide production, morphological changes, phagocytic uptake, cell-cell aggregation, and cell-matrix adhesion in RAW264.7 and U937 cells in the presence or absence of lipopolysaccharide, anti-CD43 antibody, fibronectin, and phorbal 12-myristate 13-acetate. Therefore, our results suggest that 2H-PPT can be applied as a novel functional immunoregulator of macrophages and monocytes.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.160-169
• /
• 2009

Poly-$\gamma$-glutamic acid ($\gamma$-PGA) was mixed natural flora of Bacillus subtilis, contaminated from cooked soybeans. Also, it was performed to find out the antiallergic activity by using NC/Nga mice, in vitro. The $\gamma$-PGA (PGA-HM : PGA-high molecular weight), Molecular weight 300 kDa, was decomposed and made PGA-LM (PGA-low molecular weight) which has molecular weight below 30 kDa by sonication. Therefore, it was same result between PGA-HM and PGA-LM, and reported PGA-LM as basic result. We found that PGA-LM contains antiallergic efficacy that inhibit B cells and Th2 cells activation from isolated CD4+T cells in NC/Nga atopic dermatitis model mice, and not show a cytotoxicity in the hFCs. To investigate the effects of these PGA-LM in vitro, isolation of splenic B cell and CD4+ T cells in atopic dermatitis mice were used. To elucidate the role of PGA-LM in anti-CD40+ interleukin-4 (IL-4)-mediated B-cell activation, showed that the capacity of B cells to expression IL-$1\beta$, IL-6, and TNF-$\alpha$ mRNA down-regulated, and IL-10 mRNA up-regulation by PGA-LM treatment, but it had no effect on TGF-$\beta$ expression. In addition to CD4+IFN-$\gamma$+ and CD4+CD25+foxp3+, the functions of PGA-LM in the development of the CD4+CD25+foxp3+ and CD4+IFN-$\gamma$+cells, the phenotype and functions of PGA-LM induced CD4+CD25+foxp3+, and CD4+IFN-$\gamma$+cells in CD4+T cells. These results suggested that PGA-LM could change cytokine production and generate CD4+CD25+foxp3+ Tregs in NC/Nga mice, and may be effective for immunotherapy in patients with AD.