• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.5
• /
• pp.1035-1041
• /
• 2002

Ultrasonic nebulizer with the application of new engineering methodology and the design of electronic circuit and 766ppm Cd nebulizing solution were used to generate cadmium aerosol for inhalation toxicology study. The results of particle size analysis for cadmium aerosol were as following. The highest particle counting for source temperature 20℃ was 43.449 x 10³ in inlet temperature 250℃ and particle diameter 0.75㎛. The highest particle counting for source temperature 50℃ was 43.211 x 10³ in inlet temperature 100 ℃ and particle diameter 0.75㎛. The highest particle counting for source temperature 70℃ was 41.917x10³ in inlet temperature 250℃ and particle diameter 0.75㎛. The ranges of geometric mean diameter(GMD) were 0.677-1.009㎛ in source temperature 20℃, 0.716-0.963㎛ in source temperature 50℃, and 0.724-0.957㎛ in source temperature 70℃. The smallest GMD was 0.677㎛ in source temperature 20℃ and inlet temperature 20℃. and the largest GMD was 1.009㎛ in source temperature 20℃ and inlet temperature 20℃. The ranges of geometric standard deviation(GSD) were 1.635-2.101 in source temperature 20℃. 1.676-2.073 in source temperature 50℃, and 1.687-2.051 in source temperature 70℃. The lowest GSD was 1.635 in source temperature 20℃ and inlet temperature 20℃, and the highest GSD was 2.101 in source temperature 20℃ and inlet temperature 200℃. Aerosol generated for cadmium inhalation toxicology study was polydisperse aerosol. The ranges of mass median diameter(MMD) were 1.399-5.270㎛ in source temperature 20℃. 1.593-4.742㎛ in source temperature 50℃, and 1.644-4.504㎛ in source temperature 70℃. The smallest MMD was 1.399㎛ in source temperature 20℃ and inlet temperature 20℃, and the largest MMD was 5.270㎛ in source temperature 20℃ and inlet temperature 200℃. Increasing trends for GMD, GSD, and MMD were observed with same source temperature and increase of inlet temperature. MMD for inhalation toxicology testing in EPA guidance is less than 4㎛. In our results. inlet temperature 20 and 50℃ in source temperature 20℃, and inlet temperature 20 to 150℃ in source temperature 50 and 70℃ were conformed to the EPA guidance. MMD for inhalation toxicology testing in OECD and EU is less than 3㎛. In our results, inlet temperature 20 and 50℃ in source temperature 20, 50, and 70℃ were conformed to the OECD and EU guidance.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.348-354
• /
• 2013

BACKGROUND: Globally, concern about emerging infectious diseases of livestock is growing. For the disposal of the animal carcass, it is necessary to recycle the carcass into an agriculturally usable product. The objective of this study was to investigate the composting conditions of liquid by-product obtained from degradation of animal carcass. METHODS AND RESULTS: Optimum conditions of liquid fertilizer were investigated using different microorganisms, pHs, and volumes of microorganisms (Lactobacillus rhamnosus+Pichia deserticola). Based on the results from the optimum conditions, compost maturity and quality of liquid fertilizer were evaluated for 112 days. The compost maturity of liquid fertilizer were higher in the order of LP(Lactobacillus rhamnosus + Pichia deserticola) > BC(Bacillus cereus) > BS(Bacillus subtilis). The optimum condition under different volumes of LP was injection of 0.5 mL/100 mL. The compost maturity under different pHs were higher in the order of pH 7 > $$5{\geq_-}9{\frac{._-}{.}}11$$. The liquid by-product at 56 days after composting was completely decomposed. The concentrations of T-N, T-P and $K_2O$ in liquid fertilizer at 56 days were 0.94, 0.17 and 3.78%, respectively, and the sum of those concentrations was 4.89%. CONCLUSION(S): Liquid fertilizer of by-product using pig carcass was decomposed with optimum conditions(LP, pH 7, injection of 0.5 mL/100 mL) in 56 days after composting, and was suitable for official standard of commercial fertilizer.

• Journal of the Korean earth science society
• /
• v.22 no.5
• /
• pp.350-359
• /
• 2001

The purpose of this study is to develop theme-based integrated science unit by the interdisciplinary approach and to analyze it's effects on the science achievement and the attitude towards science learning. 'Interaction' and 'Stability' were selected as the integrated themes, and the main concept and subconcept in relation to the themes were extracted from the four areas of science, and the learning contents were constructed in the integrated ways. While the main concept have relevance to subconcept in the interaction, the main concept have little relevance to subconcept in the stability. Therefore, the stability was to fit with middle school integrated science theme, but the interaction was not. The theme-based integrated science units developed was implemented in middle school, and the results are follows. First, the science achievement of group of theme-based integrated science teaching is significantly higher than those of group of traditional teaching. Second, the scores of the test of attitude toward science learning of the group of theme-based integrated science teaching is significantly higher than those of group of traditional teaching. Third, the students' perception of theme-based integrated science teaching was positive. The students have participation, interest, motivation in theme-based integrated science teaching, and students have difficulty in learning theme-based integrated science teaching.

• Development and Reproduction
• /
• v.14 no.4
• /
• pp.297-306
• /
• 2010

Tributyltin (TBT), an endocrine disrupting chemical, has been reported to decrease testicular function by causing apoptosis in the testis, but this mechanism is not fully understood. Thus, in this study we examined whether TBT induces adipogenesis of the Leydig cells to find out the correlation between adipogenesis and apoptosis in the testis. Three week old SD male rats were orally administrated with sesame oil, 1 mg/kg of TBT, or 10 mg/kg of TBT daily for 1 week and weighed after administration. The testes obtained on day 8 were weighed and stained with BODIPY and TUNEL kit. Using total RNA extracted from the isolated Leydig cells, adipogenesis and apoptosis-related genes were analyzed by real-time PCR. The testicular weights of the rats treated with 10 mg/kg TBT were significantly decreased compared to those in the control rats treated with sesame oil. As a result of BODIPY staining, the number of Leydig cells stained with BODIPY was increased in the rats treated with 10 mg/kg TBT compared with the control rats. Similar to BODIPY staining results, the TUNEL assay showed that the apoptosis of Leydig cells was increased in TBT treated rats. The results of the gene expression analysis in the Leydig cells showed that the expression of adipogenesis-related genes (PPAR${\gamma}$, aP2, Perilipin, CD36) and apoptosis-related genes (TNFRSF1A, TNFSF10) was increased after TBT administration. The present study demonstrates that TBT induces the expression of adipogenesis-related and apoptosis-related genes in the Leydig cells leading to adipogenesis and apoptosis in the testes. These results suggest that the dysfunction of Leydig cells by TBT exposure may cause a loss in testicular function.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.89-101
• /
• 2003

River deposits and farmland soils were analyzed to investigate the pollution level of heavy metals in the vicinity of the Goro abandoned Zn-mine. Surface (0-40 cm) and subsurface (40-100 cm) soils were collected around a main river located at the lower part of the Goro mine, and analyzed by ICP-MS for Cd, Cu, Pb, Zn and Cr after 0. 1N HCI extraction and by AAS for As after IN HCI extraction. Concentrations of cadmium and lead at the surface river deposits close to the mine were over the Soil Pollution Warning Limit (SPWL), and 43% of sample sites (6 of 14 samples) were over SPWL for As suggesting that river deposits were broadly contaminated by arsenic. Results from farmland soil analysis showed that surface soils were contaminated by heavy metals, while only arsenic was over SPWL at 50% of sampling sites. Main pollution mechanism around the Goro mine was the discharge of mine tailing and waste rocks from the storage site to the river and to adjacent farmland during flood season. Pollution Grades for sample locations were prescribed by the Law of Soil Environmental Preservation, suggesting that the pollution level of heavy metals around the Goro mine was serious, and the remediation operation fur arsenic and the isolation of mine tailing and waste rocks from river and farmland should be activated to protect further contamination. The area needed to clean up was estimated from pollution distribution data and the remediation methods such as a soil washing method and a soil improvement method were considered as the further remediation operation for arsenic contaminated soils and river deposits around the Goro abandoned mine.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.47-57
• /
• 2006

This study was carried out to select the Eco-tree for successful phytoremediation of abandoned metalliferous mines. We examined vegetation and heavy metal concentrations of woody plants in abandoned mining areas, and also conducted seed germination and seedling growth experiment on contaminated soils from Gahak and Geumjeong mines. Pinus densiflora, Robinia pseudoacacia, Lespedeza bicolor and Alnus japonica showed high frequency in the survey areas and had high heavy metal concentrations compared to other species. Heavy metal concentrations were higher in roots than in leaves and stems. The seed germination rate was in the order of P. densiflora, L. bicolor, R. pseudoacacia, and Alnus japonica from the incubactor and greenhouse experiment. In the incubator experiment germination rate was highest in the control soil for P. densiflora and A. japonica. Germination rate of P. densiflora was highest on the 100% contaminated soil for Gahak mine while germination rate decreased with increased percentage of contaminated soil for Geumjeong mine. In the greenhouse experiment germination rate was lowest on the 40% contaminated soil for Gahak mine while germination rate was lowest on the 20% contaminated soil for Geumjeong mine and increased with increased percentage of contaminated soil. Shoot growth was highest for L. bicolor while root growth was highest for R. pseudoacacia except for 20% contaminated soil in Geumjeong mine.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.35-42
• /
• 2015

This study was performed for both evaluating the safety of other processed products and providing basic information for making the general standard for contaminants in the category of other processed products. We analyzed the contents of three heavy metals, thirty six anti-impotence drugs and their analogues, three anti-obesity drugs and their analogues, twenty eight steroid drugs and their analogues, collecting in Incheon Metropolitan City. Any illegal compound was not detected in those products. However the contents of lead, cadmium and mercury of those products were at the range of 0.001-13.390 mg/kg, 0.03-1.231 mg/kg and 0.001-0.650 mg/kg respectively. Because there are no standards of heavy metals against other processed products, we compared the analytical results with relevant standards of both S. Korea and foreign countries. As a result, two products exceeded the relevant standards of lead, and other two products exceeded the relevant standards of mercury. The relative hazards compared to PTWI of FAO/WHO (Codex), Seafoods-pajeonmix, Perilla seed powder exceeded PTWI standards 0.214. The compulsory standards of each food product are determined by the category of the products. Because there is no standard of heavy metals in the category of other processed products in S. Korea, any food products registered as other processed product by manufacturer are free with those standards. Abusing similar problems on the categorization of food products could cause consumers' health problem. To prevent these problems, detail regulations on the categorization of food products have to be introduced.

• Korean Journal of Ichthyology
• /
• v.28 no.3
• /
• pp.200-206
• /
• 2016

The 7-week feeding experiment was conducted to investigate the effects of one experimental diet (ED) and five different commercial diets (CDs) on growth and body composition of juvenile olive flounder, Paralichthys olivaceus. An ED was formulated to contain 50.0% crude protein (CP) from fishmeal, casein, zein and wheat flour and 15.0% crude lipid (CL) from squid liver oil. Five CDs for seawater fish were two domestic E commercial diet (DECD) and C commercial diet (DCCD), three imported H commercial diet (IHCD), M commercial diet (IMCD) and O commercial diet (IOCD) containing 53.1~58.0% CP and 4.8~12.7% CL, respectively. Each diet was fed to triplicate groups of juvenile olive flounder initially weighing $29.1{\pm}0.8g/fish\;(mean{\pm}SD)$ in a flow-through seawater system with a water temperature of $23.4{\sim}28.0^{\circ}C$. Weight gain (WG) was significantly greatest in fish fed the IMCD; intermediate responses were observed for fish fed the DECD, DCCD, and IOCD, while the IHCD and the ED produced the lowest WG values. Feed efficiencies (FE) were similar to WG excluding fish fed the DCCD; FE was also greatest in fish fed the DCCD. Survival with no significant difference approached 100% for fish fed the all six diets in this experiment. Whole-body crude protein and ash contents were not affected excluding moisture and crude lipid by the different type of diets. Therefore, type of diets appeared to be important factor in influencing WG, FE and whole-body moisture and crude lipid of juvenile olive flounder; the best diet for juvenile olive flounder was determined to be the imported commercial M diets containing intermediate protein (55.9%) and lipid (12.7%) in natural seawater based on highest WG, and FE, respectively. This study indicates that the one commercially formulated diet containing intermediate protein and lipid used in this experiment could be a practical diet for juvenile olive flounder; these differences in growth performance between ED and CDs may be due to different dietary protein and lipid levels.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.