• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.65-84
• /
• 2006

In this paper, we present an improved image formation model and propose a color image enhancement based on the model. In the presented image formation model, an input image is represented as a product of global illumination, local illumination, and reflectance. In the proposed color image enhancement, an input RGB color image is converted into an HSV color image. Under the assumption of white-light illumination, the H and S component images are remained as they are and the V component image only is enhanced based on the image formation model. The global illumination is estimated by applying a linear LPF with wide support region to the input V component image and the local illumination by applying a JND (just noticeable difference)-based nonlinear LPF with narrow support region to the processed image, where the estimated global illumination is eliminated from the input V component image. The reflectance is estimated by dividing the input V component image by the estimated global and local illuminations. After performing the gamma correction on the three estimated components, the output V component image is obtained from their product. Histogram modeling is next executed such that the final output V component image is obtained. Finally an output RGB color image is obtained from the H and S component images of the input color image and the final output V component image. Experimental results for the test image DB built with color images downloaded from NASA homepage and MPEG-7 CCD color images show that the proposed method gives output color images of very well-increased global and local contrast without halo effect and color shift.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.453-455
• /
• 2004

The quality of agricultural products is represented a degree of freshness and a special quality related to a commercial value. To grade cucumber, the charge-coupled device(CCD) camera is only used to measure external qualities like color. size and degree of bended cucumber The processed area of the image replaces the weigh of cucumber. That means there is no longer used the weighing beams. The system consists of Image processing system and distributing system. This paper explains the structure and movement of the automatic grade system and applies the algorithm for deformed cucumber and characteristics of cucumber through image processing to the grade system.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1763-1766
• /
• 2003

This paper proposes a non-contact color inspection system for plasma display panel (PDP). The red, green, and blue test pattern images are acquired by using the area color CCD camera at the various distance from the PDP. The RGB values are obtained from the region of interest (ROI) which are extracted by applying the image processing to the test pattern image. Finally, the CIE xy and u'v' chromaticity coordinates of the test pattern images according to the distance are acquired from the RGB color coordinates.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1136-1142
• /
• 2010

In this study, an efficient removal algorithm for specular reflections in a tooth color image is proposed to minimize the artefact interrupting color image segmentation. The pixel values of RGB color channels are initially reversed to emphasize the features in reflective regions, and then those regions are automatically detected by utilizing perceptron artificial neural network model and those prominent intensities are corrected by applying a smoothing spatial filter. After correcting specular reflection regions, multiple seeds in the tooth candidates are selected to find the regional minima and MCWA(Marker-Controlled Watershed Algorithm) is applied to delineate the individual tooth region in a CCD tooth color image. Therefore, the accuracy in segmentation for separating tooth regions can be drastically improved with removing specular reflections due to the illumination effect.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.140-145
• /
• 2011

Joint transform correlator (JTC) is a well known tool for color pattern recognition for a color image. Color images have red, green and blue components, thus in conventional JTC, three input channels of these color components are necessary for color pattern recognition. This paper proposes a new technique of color pattern recognition by decomposing the color image into three color components and recombining those components into a single gray image in the input plane. This new technique needs single input channel and single output CCD camera, thus a simple JTC can be used. We present various kinds of simulated results to show that our newly proposed technique can accurately recognize and discriminate color differences.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3334-3343
• /
• 1996

A quantitative flow visualization technique was developed to measure velocity and temperature fields simultaneously in a two-dimensional cross section of thermo-fluid flows. Thermochromic liquid crystal(TLC) particles are used as temperature sensor and velocity tracers. Illuminating a thermo-fluid flow with a thin sheet of white light, the reflected colors from the TLC particles in the flow were captured simultaneously by two CCD cameras; a 3-chip CCD color camera for temperature field measurement and a black and white CCD camera for velocity field measurement. Variations of temperature field were measured by using a HSI true color image processing system and TLC solution. The relationship between the hue values of TLC color image and real temperature was obtained and this calibration curve was used to measure the true temperature under the same camera and illumination condition. The velocity field was obtained by using a 2-frame PTV technique using the concept of match-probability to track true velocity vectors from two consecutive image frames. These two techniques were applied at the same time to the unsteady thermal-fluid flow in a Hele-Shaw cell to measure the temperature and velocity field simultaneously and some results are discussed.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.15-22
• /
• 2000

A monitoring and the forecasting system for the swine delivery was developed using CCD camera multi-function board microphone and data-recorder equipped on a personal computer. For the swine delivery monitoring and forecasting factors four factors were selected such as genitalia swine body shape breast color and sound. Image of physical variation of body shape, shape and color of genitalia area and color of breast of pregnant sow were grabbed using the CCD color camera and multi-function board and variation of voice of pregnant sow was acquired using microphone and data recorder. Acquired information of image and voice were analyzed using a custom developed algorithm and program. The result of the forecasting efficiency of swine delivery was 89%, 71% and 100% using the variation of genitalia are the body shape and the voice of pregnant sow. respectively. The efficiency of image processing was 100% for the delivery detection when the piglet was delivered half of its body from genitalia of pregnant sow, The monitoring and forecasting system informed the estimated time of the delivery of swine to a farm manager immediately if an estimated and established time set by the farm manager was the same and/or the estimated time ws earlier than the established time and the system detected the delivery.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1207-1214
• /
• 2009

In this study, we propose a novel color-image segmentation algorithm to discern the teeth region utilizing RG intensity and its relevant RGB histogram features with resolving the variations of its maximum intensity in terms of peaks and valleys. Tooth candidates in a CCD image are first extracted by applying RGB color multi-threshold levels and consequently the successive morphological image operations and a Sobel-mask edge processing are performed to resolve the teeth region and its contour.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2000

In recent year, many imaging systems have been developed, and it became increasingly important to exchange image data through the computer network. Therefore, it is required to reproduce color image independently on each imaging device. However, even if the image are same, perceived color is not always same under different viewing conditions. On the other hand, even if the image are different, we want to perceive same color under different viewing conditions. Therefore we must know the spectral reflectance information of object. We measured many reflectance human skin can be estimate using only three principal component. For Munsell color patches, five principle components were necessary to estimate the reflectance spectra. For that purpose, we have developed color image acquisition system that is composed of five band filters and CCD camera. Improved spectral reflectance of object is predicted by five band images taken by color image acquisition system and then we take account of camera's noise and component of object image for predicting accurate spectral reflectance of object. In the results, we confirmed that color difference and MSE(Mean Square Error) between measured and predicted spectral reflectance of object decreased into 0.0071 and 7.72 respectively.