• Journal of the Korean GEO-environmental Society
• /
• v.9 no.7
• /
• pp.13-23
• /
• 2008

In this study, the centrifuge tests and numerical analyses were performed to investigate the lateral flow behavior and stability of abutment when high filling was applied on the soft ground improved by SCP. The centrifuge model tests and numerical analyses were fulfilled in the case of the back of abutment filled by EPS (case 1) and soil (case 2), and the potentiometer was installed on the abutment and fill to measure the vertical and horizontal displacement at the top of abutment. As a result of the centrifugal tests, the horizontal displacement of abutment in the case 1 was 1.4cm that is almost coincide with the results of numerical and satisfy the allowable standard. On the other hand, the horizontal displacement of abutment in the case 2 was 12 cm that is 18% greater than that of numerical analysis and exceed the allowable standard. As a result of analysis, the maximum horizontal displacement of pile was 1.26 cm in case 1 that satisfies the criterion of allowable horizontal displacement (1.5 cm). In contrast, the maximum horizontal displacement of pile was 1.005 m in case 2 that greatly exceeds the allowable horizontal displacement.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.2
• /
• pp.77-84
• /
• 2006

This research evaluates thermal comfort by comparing the case of maintain cooing temperature of room with the case of raising it at the point of time that human body begins to adapt. An experiment uses constant temperature & humidity chamber 2 places. Pretesting room make up summer season environment, the testing room control by air-conditioner. In condition that maintain temperature of $33^{\circ}C$. The subjects stay in the pretesting room during the 30 minute for the heat storage amount of the normal summertime. The subjects stay in the testing room under each case (case 1: maintaining $24^{\circ}C$, case 2: maintaining $26^{\circ}C$, case 3: up $1^{\circ}C$ after maintaining $24^{\circ}C$ during 30 minute, case 4: up $1^{\circ}C$ after maintaining $26^{\circ}C$ during 40 minute). 1. Result of comparison of case 1 and case 2 appears that thermal sensitive vote examine from slight cool to cool and thermal comfort examine slight comfort by temperature rise at human body adaptation point of time.2. Test of case 3 and case 4 appear similar value at thermal sensitive vote and thermal comfort.3. Through the case 2 and case 4, continuous thermal comfort maintain at $24^{\circ}C$, if raise $26^{\circ}C$, same thermal comfort maintain after a human body adaptation temperature rising effect bring energy saving.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.4
• /
• pp.304-315
• /
• 2009

Numerical simulations were carried out to understand the effect of Sea Surface Temperature (SST) spatial distribution on regional circulation. A three-dimensional non-hydrostatic atmospheric model RAMS, version 6.0, was applied to examine the impact of SST forcing on regional circulation. New Generation Sea Surface Temperature (NGSST) data were implemented to RAMS to compare the results of modeling with default SST data. Several numerical experiments have been undertaken to evaluate the effect of SST for initialization. First was the case with NGSST data (Case NG), second was the case with RAMS monthly data (Case RM) and third was the case with seasonally averaged RAMS monthly data (Case RS). Case NG showed accurate spatial distributions of SST but, the results of RM and RS were $3{\sim}4^{\circ}C$ lower than buoy observation data. By analyzing practical sea surface conditions, large difference in horizontal temperature and wind field for each run were revealed. Case RM and Case RS showed similar horizontal and vertical distributions of temperature and wind field but, Case NG estimated the intensity of sea breeze weakly and land breeze strongly. These differences were due to the difference of the temperature gradient caused by different spatial distributions of SST. Diurnal variations of temperature and wind speed for Case NG indicated great agreement with the observation data and statistics such as root mean squared error, index of agreement, regression were also better than Case RM and Case RS.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.7
• /
• pp.255-262
• /
• 2014

Our previous research[1] suggested object extraction and modeling method based on Fillmore's case grammar. This approach had not considered of use case extraction and method. To solve this problem, we adopt Fillmore's semantic method as linguistic approach into requirement engineering, which refine fillmore's case grammar for extracting and modeling use cases from customer requirements. This Refined mechanism includes the definition of a structured procedure and the representation of visual notations for 'case' modeling. This paper also proposes the use case decision matrix to identify use case size from extracted use cases based on goal oriented requirement engineering(GoRE), which related with the complexity of use case, and also prioritizes the use cases with this matrix. It demonstrates our proposal with the bank ATM system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.203-208
• /
• 2016

In this study, to clarify the differences rebar corrosion beginning, through the actual corrosion accelerated test in corrosion time and laboratory test chamber of the structure of the marine environment results in both environments, it is an object of correlation coefficient derived. The accelerated corrosion test was carried out by two case, I.e., one is $20^{\circ}C$ of low temperaure codition(case 1), and the other is $65^{\circ}C$ of high temperaute codition(case 2). Whether corroions occurs, it was measures using half-cell potential method. The results indicated that case 2 is to acclerate the corrosion of rebar about 1.7~1.8 times as compared with case 1, thenthe corrosion of rebar embadded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between acclerated corrosion test and long-term exposure test, case 1 is 2.45 to 2.94, and case 2 is 4.37~4.99.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.397-401
• /
• 2015

In this study, analysed the characteristics of power drop and surface damage in solar cell through high temperature and humidity test in the 3 case of EVA(ethylene vinyl acetate) and 2 case ribbon thickness. The solar cells were tested during the 500hr in $85^{\circ}C$ temperature and 85% relative humidity conditions, that excerpted standard of PV Module(KS C IEC-61215). Through the EL(Electroluminescence) shots, specimen's surface have partialy damaged. Before and after high humidity and high temperature test, ribbon thickness $200{\mu}m$ EVA1 case power drop rate was 8.463%, EVA2 case was 6.667%, EVA3 case was 6.373%. In the ribbon thickness $250{\mu}m$ EVA1 case power drop rate was 6.521%, EVA2 case was 8.517%, EVA3 case was 6.019%. EVA3 case was the lowest power and FF(fill factor) drop rate at the 2 case of ribbon thickness, because EVA3 is laerger than EVA1 and EVA2 in thickness, elongation and tensile strength.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.489-497
• /
• 2017

The purpose of this study is to develop case management activities inventory and analyze the perception on case management practice using importance-performance analysis(IPA) in community welfare centers. The comprehensive literature review and the content analysis from the professional scholar and social workers produced 89 items of case management activities items. A survey was conducted to 277 case managers in community welfare centers. The exploratory factor analysis, reliability and validity analysis developed the case management activities inventory comprised of 11 factors and 61 items. Suggestions were made to improve case management practice in community welfare centers.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.3
• /
• pp.15-23
• /
• 2024

Subsurface drainage improves crop productivity in poorly drained soils but may also substantially contribute impairment of surface water quality due to excess leaching losses of nutrients like Nitrate-Nitrogen (NO₃-N). This research presents preliminary findings from a 3-years tile depth and spacing study in Illinois state that includes three drain spacings implemented in 2 plots. We found that the plot with the narrower subsurface drainage (Case 1) exported more drainage water compared to the plot with the narrower subsurface drainage system (Case 2). The total drainage water from Case 1 plot showed 57% more compared to Case 2 plot. Whereas we observed that the plot with narrower drain spacing (Case 1) exported only 9% more NO₃-N leaching losses compared to the wider plot (Case 2). The average corn yield was observed higher in plot Case 1 compared to Case 2. Especially, we observed about 7% higher corn yield in plot Case 1 compared to Case 2 plot in the relatively dried year (2022). The preliminary findings for this study suggest that subsurface drainage systems can be optimized to reduce nutrient losses while improving the crop productivity.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.11a
• /
• pp.417-422
• /
• 2002

Use Case는 일반적으로 시스템의 기능적 요소를 나타내기 위하여 활용하며, 고객의 요구사항을 반영하여 작성을 한다. 그러므로 Use Case 규격대로 시스템이 구현되었는가를 검증하는 것은 고객이 원하는 시스템이 구현되었는가를 검증하는 것이라 할 수 있다. 그러므로 Use Case를 기반으로 테스트를 수행 하기 위한 테스트 케이스 작성이 필요하다. 본 논문에서는 Use Case를 이용하여 테스트 케이스를 도출하는 과정을 제안하고, 이에 의하여 확보되는 테스트 커버리지의 의미를 설명한다.

• Journal of Chest Surgery
• /
• v.21 no.5
• /
• pp.842-849
• /
• 1988

Between July, 1987, and September, 1988, 6 patients with coronary occlusive disease received coronary artery bypass surgery at Kyungpook University Hospital. There were five males and one female whose age ranged from 39 to 64 years[mean 54*8.0 years]. Of the 6 patients, 5 suffered from unstable angina, 1 suffered from stable angina. Selective coronary angiography revealed a significant stenosis of the left anterior descending artery in 6 cases, of its diagonal branch in 1 case, of the right coronary artery in 1 case, the circumflex artery in 1 case, and of its obtuse marginal branch in 1 case. The mode of anastomosis were single saphenous vein graft in 3 cases, single left internal mammary artery graft in 1 case, double saphenous vein graft with sequential anastomosis in 1 case, and left internal mammary artery plus saphenous vein graft in 1 case. Of these, 6 grafts to left anterior descending artery were done. There was no operative death, but perioperative myocardial infarction was happened in 1 case. All survivors were free of angina and discontinuing medical therapy during the follow up period[mean 7.8*5.15 months].