• 한국의상디자인학회지
• /
• 제19권4호
• /
• pp.123-137
• /
• 2017

The purpose of this study is to suggest sleeve cap height with a satisfying wearing sensation and appearance on jackets for women in their twenties so that high-consumer demand jackets can be produced. Five experimental jackets with sleeve cap heights of [(AH/3)-1cm], [(AH/3)-0.5cm], [AH/3], [(AH/3)+0.5cm] and [(AH/3)+0.8cm] were made for 30 subjects to try on after which the subjects were then surveyed for their assessment of appearance, wearing sensation and preference. On the basis of the results, the optimum height of the sleeve cap has been proposed along with the following contents and results of this research. 1. [AH/3] [(AH/3)+0.8cm] of sleeve cap height was assessed to beof desirable appearance. 2. [AH/3] of sleeve cap height garnered a high opinion in terms of intuitive wearing sensation, while [(AH/3)-1cm] [AH/3] were the heights with overall satisfaction of intuitive and movement wearing sensations. If discomfort in the upper sleeve at 'straight arm' posture can be tolerated, the sleeve cap height can be set to [(AH/3)-1cm]~[(AH/3)+0.5cm]. 3. [AH/3] and [(AH/3)+0.5cm] were found to have a high preference among wearers, which indicated that the women in their twenties prefer a slim type of sleeve, putting appearance above wearing sensation. Consequently, [AH/3] is desirable when appearance, wearing sensation and preference are considered, [(AH/3)+0.5cm] is fit for business uniform for static duties or formal dress focused on aesthetic impression and [(AH/3)-1cm]~[AH/3] are desirable for work clothes when considering active duties.

• Tuberculosis and Respiratory Diseases
• /
• 제78권3호
• /
• pp.232-238
• /
• 2015

Background: A relationship between low vitamin D levels and the development or outcomes of respiratory diseases has been identified. However, there is no data on the vitamin D status in patients with acute eosinophilic pneumonia (AEP). We evaluated the vitamin D status in patients with AEP among South Korean military personnel. Methods: We prospectively compared the serum levels of total 25-hydroxyvitamin D [25(OH)D], 25(OH)D3, and 25(OH)D2 among patients with AEP, pulmonary tuberculosis (PTB), and community-acquired pneumonia (CAP). Results: In total, 65 patients with respiratory diseases, including AEP (n=24), PTB (n=19), and CAP (n=22), were identified. Of the 24 patients with AEP, 2 (8%) had deficient total 25(OH)D levels (<10 ng/mL), 17 (71%) had insufficient total 25(OH)D levels (${\geq}10$ to <30 ng/mL), and only 5 (21%) had sufficient total 25(OH)D levels (${\geq}30$ to <100 ng/mL). The difference in the total 25(OH)D levels among patients with AEP, PTB, and CAP was not statistically significant (p=0.230). The median levels of total 25(OH)D, 25(OH)D3, and 25(OH)D2 were 22.84, 22.84, and 0.00 ng/mL, respectively, and no differences in the 25(OH)D level were present among patients with AEP, PTB, and CAP with the exception of the total 25(OH)D level between patients with AEP and PTB (p=0.042). Conclusion: We have shown that low vitamin D levels are frequently found in patients with AEP and are comparable with those in patients with PTB and CAP.

• 한국지반공학회논문집
• /
• 제25권11호
• /
• pp.17-26
• /
• 2009

마이크로파일이 직접기초시스템으로 활용되는 경우 말뚝 캡이 설치되어 말뚝지지 전면기초의 래프트와 같은 역할을 수행하지만 마이크로파일 기초시스템의 하중분담 거동에 관한 연구는 미미한 실정이다 이에 본 연구에서는 말뚝캡이 씌워진 실물 크기의 마이크로파일 재하시험 자료를 바탕으로 3차원 비선형 유한요소해석을 실시하여 마이크로 파일과 래프트의 하중분담 거동을 분석하고 각각의 변수들이 하중분담 거동에 미치는 영향을 파악하였다. 해석 결과 $2{\times}1$ 마이크로파일 기초시스템의 경우 최종하중단계에서 약 50%의 하중을, 그리고 $2{\times}2$ 마이크로파일 기초시스템의 경우 약 30%의 하중을 캡이 분담하고 있는 것으로 나타났다. 또한 마이크로파일의 간격 및 경사각이 증가할수록 캡의 하중분담이 커지는 것을 알 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.181-184
• /
• 2001

An insulated monopole antenna having a balun and a cap at the coaxial feeder and the monopole end, respectively, may be designed to have a well-confined uniform heating Pattern as well as the satisfactory impedance matching at the input port of the antenna. Measurements by using the infra red camera in the biologically equivalent tissue phantom shows that the highest temperature is 46 degree in centigrade at the 20 watts input Power for 2 minutes and input reflection less than -30 dB at 2450 MHz.

• 대한환경공학회지
• /
• 제30권3호
• /
• pp.250-256
• /
• 2008

• 한국대기환경학회지
• /
• 제24권1호
• /
• pp.72-82
• /
• 2008

Benzene is a very harmful and toxic compound known as human carcinogen by all routes of exposure. Owing to the risky feature of benzene, several countries such as Japan, UK and EU have established the ambient air quality standard and protect from that risk of it. Korea also has designated it as one of the criteria air pollutants and established the concentration limit ($5\;{\mu}g/m^3$) in the air and is going to apply the standard from 2010. Benzene is emitted from various sources such as combustion plants, production processes, waste treatment facilities and also automobiles. Mobile source is known as one of the major emission sources of benzene. In this study, we estimated the domestic emissions of benzene from mobile source and compared the results with those of advanced countries. Mobile source was divided into 2 categories, Le., on-road source and non-road source. The total emissions of benzene from mobile source were estimated as 3,106 tons/yr and 1,612 tons/yr was emitted from on-road source and 1,494 tons/yr was from non-road source. Emission ratio of benzene from on-road source showed that 80.0% was from passenger cars, 10.1% was from taxis, 7.2% was from light-duty vehicles, 2.5% was from heavy-duty vehicles and 0.2% was from buses. In the case of non-road source, the distribution showed that 66.3% was from construction machineries, 14.5% was from locomotives, 11.7% was from ships, 7.1% was from agriculture equipments and 0.5% was from aircrafts. The cold-start emissions were estimated as 942 tons/yr and this value was almost 1.5 times greater than that for hot engine emissions (608 tons/yr). In addition, the fuel-based distribution was 65.9%, 31.1% and 2.8% from gasoline, LPG and diesel vehicles, respectively. The emission ratio from mobile source occupied 65% and 30% of total benzene emissions in USA and UK, respectively. In case of Korea, the emission ratio of benzene from mobile source occupied 29% (15% from on-road source, 14% from non-road source) which showed similar value with UK.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.391-396
• /
• 2022

The purpose of this study was to investigate the effect of cross arms and palms facing forward on spinopelvic parameters during the whole spine lateral radiography. In addition, we would like to present the usefulness of a posture with the palm facing forward during whole spine lateral radiography of the spine using EOS. The subjects of this study were images of a total of 50 patients (18 males, 32 females) who whole spine lateral radiography using the conventional method and the EOS method from October 2020 to March 2021. The posture used in this study was set as 'CAP' for cross arms and 'PUSH' for posture with palms facing forward. In this study, among the spinal stability factors, thoracic kyphosis (thoracic vertebrae 4 to 12), lumbar lordosis (lumbar vertebrae 1 to sacrum 1), sagittal vertical axis, sacral slope, and shoulder flexion angle were compared on average. The mean thoracic kyphosis was 34.52±12.46° for CAP and 28.46±10.81° for PUSH (p<0.01). The lumbar lordosis of CAP was 42.45±17.45°and that of PUSH was 40.56±16.14°(p>0.57). The sagittal vertical axis was 26.59±34.34 mm in CAP and 21.21±35.41 mm in PUSH (p>0.44). In CAP, the sacral slope was 30.96±10.29°, and in PUSH, it was 31.01±10.19° (p>0.98). shoulder flexion angle was 38.31±8.24° for CAP and 26,08±6.71° for PUSH(p<0.01). As a result of this study, the PUSH posture is considered to be a posture that can minimize the shoulder flexion angle and can perform a stable examination while minimizing changes in spino-pelvic parameter.

• 대한수학회보
• /
• 제30권2호
• /
• pp.213-221
• /
• 1993

In this paper, we will show that the multiplicative group G in a finite ring R with identity 1 has a (B, N)-pair satisfying the following conditions; (1) G=BNB where B and N are subgroups of G. (2) B.cap.N is a normal subgroup of N and W = N/(B.cap.N), is generated by a set S = { $s_{1}$, $s_{2}$, .., $s_{k}$} where $s_{i}$.mem.N/(B.cap.N), $s_{i}$$^{2}$.iden.1 and $s_{i}$.neq.1. (3) For any s.mem.S and w.mem.W, we have sBw.contnd.BwB.cup.BswB. (4) We have sBs not .subeq. B for any s.mem.S. When G, B, N and S satisfy the above conditions, we say that the quadruple (G, B, N, S) is a Tits system. The group W is called the Weyl gorup of the Tits system.ystem.m.

• 보존과학연구
• /
• 통권29호
• /
• pp.91-110
• /
• 2008

The museum of Chonnam National University unearthed and researched an Andong tumulus located in Gildu-ri, Podumyeon, Goheung, Jeonnam in March 2006, and many remains were excavated from the tomb. The Conservation Science division of the National Research Institute Cultural Heritage was asked to deal with about 100 pieces of relics with gilt bronze, including a Gilt-Bronze Cap, and ironware remains from the excavated site for the museum of Chonnam National University and urgently dealt with the excavated site for 4 days from March 27 to March 30, 2006. All of the remains were dealt with and cleaned up in this way, were moved to the National Research Institute Cultural Heritage, and have been under a conservation treatment until now. In this study, excavated conditions, the handling of the excavated site, the conservation treatment process until now, and the forthcoming conservation treatment plans will be examined specifically focusing on the Gilt-Bronze Cap with gilt bronze among many other remains.

• 한국가시화정보학회지
• /
• 제14권2호
• /
• pp.25-30
• /
• 2016

The wafer temperature and its uniformity inside the LPCVD chamber were analyzed. The temperature uniformity at the end of the wafer load depends on the heat-insulating cap. The finite difference method was used to investigate the radiation and conduction heat transfer mechanisms, and the temperature field and heat diffusion in the LPCVD chamber was visualized. It was found that the temperature uniformity of the wafers could be controlled by the size and distance of the heat-insulating cap.