• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.175-180
• /
• 2002

In order to satisfy the requirements of time reduction and cost saving for development of electronic control systems(ECU) in automotive industry, the applications of a standardized real-time operating system(RTOS) and a communication protocol to ECUs are increased. In this study, a body control module(BCM) that employs OSEK/VDX(open system and corresponding interfaces for automotive electronics/vehicle distributed executive) OS tour the RTOS and a controller area network(CAN) fur the communication protocol is designed, and the performances of the system are evaluated. The BCM controls doors, mirrors, and windows of the vehicle through the in-vehicle network. To identify all the transmitted and received control messages, a PC connected with the CAN communication protocol behaves as a CAN bus emulator. The control system based upon in-vehicle network improves the system stability and reduces the number of wiring harness. Furthermore it is easy to maintain and simple to add new features because the system is designed based on the standards of RTOS and communication protocol.

• 전기학회논문지P
• /
• 제52권3호
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.130-133
• /
• 2001

VoIP(voice over internet protocol) technology is based on IP protocol. The IP protocol can be involved in two types of communication: unicasting and multicasting. Unicasting is the communication between one sender and one receiver. It is one-to-one communication. Multicasting is one-to-many communication. So that, many receivers can get same data from one sender simultaneously. and, the different protocol are proposed for VoIP; H.323, SIP and MGCP. MGCP is perfect server-client protocol, so MGCP is very attractive VoIP protocol to ISP. This paper uses MGCP and offers modified MGCP for conference call. So that, Modified MGCP is compatible to MGCP, and supports conference call using IP-multicast.

• Journal of information and communication convergence engineering
• /
• 제18권1호
• /
• pp.8-15
• /
• 2020

Internet-of-Things (IoT) technologies are used everywhere, and communication is one of its core and essential aspect. To solve the networking and communication of small IoT terminals, in this paper, a communication scheme based on low-cost WiFi is proposed, which also has the advantages of good compatibility and low power consumption. At the same time, it has a convenient one-key configuration mode, which reduces the technical requirements for operators. In this study, a communication protocol is designed that mainly aims at up to dozens of domestic IoT terminals, in which the amount of data is not large, data exchange is not high, and network is unstable. According to the alarm data, update data, and equipment or network fault, the protocol can respectively transmit in real time, regularly and repeatedly. This protocol is open and easy to integrate, and after cooperating with tiny encryption algorithm, information can be safely transmitted.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1820-1826
• /
• 2013

산업현장에서 가장 많이 사용하고 있는 이기종 필드 센서 네트워크의 경우 센서간 통신은 CAN 통신 방식을 기반으로 버스형 구조로 설계되어 있다. 이러한 네트워크는 버스형 구조 특성상 거리 벡터 라우팅 프로토콜을 지원하고 있으며, 또한 이기종 네트워크를 지원할 경우 별도의 라우팅 테이블을 두어 변환하는 방식을 지원한다. 하지만 이러한 네트워크는 확장의 제한 및 늦은 전송처리속도 문제로 인해 네트워크 효율성 저하에 원인이 되고 있다. 그래서 본 논문에서는 네트워크의 확장성 및 높은 전송 처리속도를 보장하기 위한 새로운 CAN 라우팅 프로토콜을 제안한다. 제안하는 라우팅 프로토콜은 RIPv2 기반으로 설계되었으며, 거리 벡터 라우팅 프로토콜의 단점을 보안하기 위해 우선순위 부여 및 부가 기능을 부여할 수 있는 구간을 두는 방식을 지원하도록 설계하였다. 본 논문에서 제안하는 방식의 효율성 증가를 검증하기 위해 CAN 통신 기반으로 이기종 필드 센서 네트워크를 구축하여 데이터 전송률을 측정하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.31-34
• /
• 2005

In this paper, we proposed a MAC protocol which can be used in power line communications(PLC). In the power line communication network, the data signal cannot travel long distance because of a serious attenuation. Consequently, we need to have a number of repeaters (amplifiers) in order to recover the signal power, which causes flooding problem in the network The proposed MAC protocol uses polling concept and solves the flooding problem in the power line communication network. The proposed protocol can be applied to power line communication networks for automatic power distribution control system. A mathematical analysis has been carried out to estimate the performance of the proposed protocol.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권3호
• /
• pp.25-33
• /
• 2021

Energy-harvesting wireless sensor networks(EH-WSNs) can collect energy from the environment and overcome the technical limitations of existing power. Since the transmission distance in a wireless sensor network is limited, the data are delivered to the destination node through multi-hop routing. In EH-WSNs, the routing protocol should consider the power situations of nodes, which is determined by the remaining power and energy-harvesting rate. In addition, in applications such as environmental monitoring, when there are urgent data, the routing protocol should be able to transmit it stably and quickly. This paper proposes an adaptive routing protocol that satisfies different requirements of normal and urgent data. To extend network lifetime, the proposed routing protocol reduces power imbalance for normal data and also minimizes transmission latency by controlling the transmission power for urgent data. Simulation results show that the proposed adaptive routing can improve network lifetime by mitigating the power imbalance and greatly reduce the transmission delay of urgent data.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1144-1155
• /
• 2006

Digital communication networks have become a core technology in advanced building automation systems. BACnet(Building Automation and Control networks) is a standard data communication protocol designed specifically for building automation and control systems. BACnet adopts Master-Slave/Token-Passing(MS/TP) protocol as one of its field level networks. In this study, we introduce a method of implementing a bandwidth allocation scheme in the MS/TP protocol. The bandwidth allocation scheme improves the capability of real-time communication of the original MS/TP protocol. The bandwidth allocation scheme introduced in this paper can be easily implemented in the existing MS/TP protocol with a slight modification. In this study, we actually developed the hardware and firmware of the modified MS/TP communication module in which the bandwidth allocation scheme is implemented. Using the modified MS/TP communication module, we developed an experimental model in order to examine the validity of the bandwidth allocation scheme in the MS/TP protocol. Experimental results show that the modified MS/TP protocol satisfies the requirements of real time communication for periodic and urgent messages of BACnet communication services.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5035-5057
• /
• 2019

Advancements in nanotechnology and novel nano materials in the past decade have provided a set of tools that can be used to design and manufacture integrated nano devices, which are capable of performing sensing, computing, data storing and actuation. In this paper, we have proposed cooperative nano communication using Power Switching Relay (PSR) Wireless Power Transfer (WPT) protocol and Time Switching Relay (TSR) WPT protocol over independent identically distributed (i.i.d.) Rayleigh fading channels in the Terahertz (THz) Gap frequency band to increase the range of transmission. Outage Probability (OP) performances for the proposed cooperative nano communication networks have been evaluated for the following scenarios: A) A single decode-and-forward (DF) relay for PSR protocol and TSR protocol, B) DF multi-relay network with best relay selection (BRS) for PSR protocol and TSR protocol, and C) DF multi-relay network with multiple DF hops with BRS for PSR protocol and TSR protocol. The results have shown that the transmission distance can be improved significantly by employing DF relays with WPT. They have also shown that by increasing the number of hops in a relay the OP performance is only marginally degraded. The analytical results have been verified by Monte-Carlo simulations.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제11권4호
• /
• pp.312-333
• /
• 2005

SIP(Session Initiation Protocol)은 VoIP(Iroice over IP)와 같은 인터넷 멀티미디어 통신 시스템의 세션 제어 프로토콜로 제안되었으며 많은 표준안에서 채택하고 있다. SIP는 다양한 형태의 오디오와 비디오 형식과 품질이 보장된 실시간 데이터 전송을 지원하기 위해 복잡한 세션 제어 단계를 갖는다. 그러나 지금까지의 프로토콜 분석기는 SIP 기반 멀티미디어 통신 시스템에서 발생되는 트래픽을 상세하게 분석해주지 못하고 있다 이에 본 논문에서는 SIP 기반의 멀티미디어 통신 시스템의 세션 설정 단계에서 데이터 교환 및 세션 변경에 따른 세부 정보를 분석하고 진단할 수 있는 도구로 새로운 프로토콜 분석기를 설계하고 구현한다. 제안된 프로토콜 분석기는 STAT(SIP based Traffic Analysis Tool)이라고 부르며 범용성과 확장성이 있도록 PC Windows에서 사용 가능한 소프트웨어로 구현되었다. STAT는 이더넷의 특징인 동보 기능을 이용하여 저수준 패킷을 수집하여 분석함으로써 SIP 기반 통신 시스템에 직접적인 영향 없이 세션 연결 상태와 실시간 트래픽 모니터링 정보를 제공한다. 따라서 본 논문에서 구현한 STAT는 SIP 기반 멀티미디어 통신 시스템의 개발 및 관리 도구로 활용될 수 있다.