• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.123-130
• /
• 1999

The bus as a feeder trip should supply equality service to the whole community. But in spite of the change of latent demand to the bus by the variety of regional structural change, the existing bus route can not supply effective feeder service. For cope with the latent demand to the bus, this study establish a concept that frame of the bus operation and management. This study tackled to evidence this fact by analyzing the bus transport problems in terms of the urban growth, and following issues were discussed: 1) the strategy for improvement of bus operation, 2) the land use control which is appropriate for the public transport network, 3) the economical range to justify the bus operation, 4) the allowance for the private transport mode. On the second part of this study, the difference on the bus operation was compared to determine the range within which the bus operation can be justified. This would provide the direction to improve the management for bus operation and fundamental information to develop the bus operation system.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1469-1472
• /
• 2019

CAN bus in automotive applications does not assign node addresses. When a node is hacked and it transmits malicious data frame, it is difficult to resolve which node is hacked. However, this CAN bus internal attack seriously threatens the safety of a car, so a prompt counterattack is necessary in the CAN bus physical layer. This paper proposes a counterattack method against malicious CAN bus internal attack. When a malicious data frame is detected, an intrusion detection system in the CAN bus increases the error counter of the malicious node. Then, the malicious node is off from the bus when its error counter exceeds its limit. A CAN controller with the proposed method is implemented in Verilog HDL, and the proposed method is proved to counterattack against malicious CAN bus internal attack.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.96-102
• /
• 2008

The SoC bus topology is classified to single and multiple bus systems due to bus number. In single bus system, the selected only one master among the masters that try to initiate the bus transaction can execute its data transaction. On the other hand, in multiple bus system, as several buses that can be operated independently are connected with bridge, multiple data can be transferred parallel in each bus. However, In the case of data communication from one bus system to the other, data latency has remarkably increased in multiple bus. Furthermore, the performance of multiple bus can be easily different from master number, slave type and so on. In this paper, the performance of single and multiple bus architecture is compared and quantitatively analysed with the variation of master number and slave type especially a tying SDRAM, SRAM and register with TLM simulation method.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.101-107
• /
• 2009

Growth in the VLSI process and design technology is resulting into a continuous increase in the number of IPs on a chip to form a system. Because of many IPs on a single chip, efficient communication between IPs is essential. We propose a dynamically reconfigurable 3-layer bus structure which can adapt to the pattern of data transmission to achieve an efficient data communication between various IPs. The proposed 3-layer bus can be reconfigured to multi-single bus mode, and single-multi bus mode, thus providing the benefits of both single-bus and multi-bus modes. Experimental results show that the flexibility of the proposed bus structure can reduce data transmission time compared to the conventional fixed bus structure. We incorporated the proposed bus structure in a JPEG system and verified that the proposed structure achieved an average of 22% improvement in time over the conventional fixed bus structure.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2369-2377
• /
• 1998

Fault simulators are used to evaluate the quality of a test pattern generated. So far, most fault simulators did not handle bus conflicts properly. We analyzed . all possible bus conflicts when test patterns are applied to a circuit with bus structure and categorized bus conflicts into various types. Also. we proposed an efficient method to identify various types of bus conflicts. The fault simulator which employs the proposed method can evaluate the quality of test patterns generated and also can avoid destruction of bus drivers due to bus conflicts hy warning the use of test patterns which cause bus conflicts. The proposed method can also be incorperated into a test pattern generator so that it can generate conflict-free test patterns.

• Journal of Convergence for Information Technology
• /
• v.8 no.5
• /
• pp.115-120
• /
• 2018

As the number ofconnected cars grows, the security of the connected cars is becoming more important. There are also increasing warnings about the threat of attacks via the CAN bus used for in-vehicle networks. An attack can attack through a vulnerability in the CAN bus because the attacker can access the CAN bus remotely, or directly to the vehicle, without a security certificate on the vehicle, and send a malicious error message to the devices connected to the CAN bus. A large number of error messages put the devices into a 'Bus-Off' state, causing the device to stop functioning. There is a way to detect the error frame, or to manage the power of the devices related to the bus, but eventually the new standard for the CAN bus will be the fundamental solution to the problem. If new standards are adopted in the future, they will need to be studied.

• Journal of Korea Multimedia Society
• /
• v.15 no.2
• /
• pp.281-289
• /
• 2012

The goal of our research is to develop more effective bus information system using user generated information and social tagging. In this research, we have developed a smartphone-based bus guide system using social tagging and awareness of location. It will guide users to the nearby bus stops and provides users with information about the bus lines at the bus stops. Information around bus-stops can also be registered as tags into the system by users and can be utilized for bus information service. Simple keyword search utilizing tagging information can provide users with bus information about destinations.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1777-1782
• /
• 2007

Since July in 2004, starting with urban bus reorganization of Seoul metropolitan government, the change of the public transportation which integrates the urban bus and the subway of the metropolis are being continued. But the integration of such bus and the subway is staying to only a fare system mainly, and the guidance system of the subway and the bus has not changed. So we propose the concept of the new guidance system following public transportation change tendency. At first we introduce the new information system which can guide city railroad and bus altogether, and we propose new system which can guide divided by the trunk line and the branch line instead of bus and subway. Last high-functional guidance system which can give passengers tip and hint for various and effective usage of public transportation in more complicated city transit network is introduced. This new guidance system can increase competitiveness of public transportation system and stretch transportation share of it. And that guidance system is high-class contents that all public transportation business can utilize, so it can originate new industry. In conclusion, this new innovative guidance system is important field that government, local administration and public transportation business must be concerned and develop.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.83-93
• /
• 2005

This paper again to present position of a bus that is running in bus government organization small grasp and Can instruct control about the vehicles progress speed in government organization small to bus driver. Therefore, Inform a bus that own wants to ordinary people who carry transfer communication terminal is situated to where present, ad Do by purpose that offer system that inform running information of a bus to ARS and FAX, internet and ordinary people through PC communication. Also, Intelligence style bus control system that see also includes function that do as can guide arrival expectation depot automatically without driver's manufacturing when run a bus.