• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.356-361
• /
• 2023

In order to improve the durability of the proton exchange membrane fuel cell (PEMFC), it is important to accurately evaluate the durability of the polymer membrane in a short time. The test conditions for chemically accelerated durability evaluation of membranes are high voltage, high temperature, low humidity, and high gas pressure. It can be said that the protocol is developed by changing these conditions. However, the relative influence of each test condition on the degradation of the membrane has not been studied. In chemical accelerated degradation experiment of the membrane, the influence of 4 factors (conditions) was examined through the factor experiment method. The degree of degradation of the membrane after accelerated degradation was determined by measuring the hydrogen permeability and effluent fluoride ion concentration, and it was possible to determine the degradation order of the polymer membrane under 8 conditions by the difference in fluoride ion concentration. It was shown that the influence of the membrane degradation factor was in the order of voltage > temperature > oxygen pressure > humidity. It was confirmed that the degradation of the electrode catalyst had an effect on the chemical degradation of the membrane.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.79-102
• /
• 2023

Objective : Autistic Spectrum Disorders(ASD) is a developmental disorder characterized by atypical sensory adaptation, communication problem, stereotyped behavior, and feeding disorders. The reasons for ASD feeding disorders are oral sensory motor, cognitive, behavioral, and social problems. Major symptoms include picky eating, selective eating, food refusal, food neophobia, limited food variety, and food aversion. ASD feeding disorders could be accompanied by various problems such as health and nutrition intake problems, feeding development, eating-related sociability, and family and caregiver stress. Feeding problems and disorders in ASD can present from birth. However, ASD is diagnosed by the age of 3, and there might be an appropriate treatment gap. Usually, symptoms of feeding disorders tend to decrease with age. However, the symptoms often remain, so early evaluation, intervention, and periodic checking are necessary. In this study, the general information about the feeding disorder characteristics of ASD, influencing factors, and intervention were described through a literature review. Conclusion : Sensory-based therapy and behavior-based therapies are generally used for feeding disorders in ASD. Sensory-based therapy is effective for food sensitivity and behavior-based therapy for food selection. As the symptoms of feeding disorders in ASD are diverse, a comprehensive approach includes play and participation, oral motor exercise, diet, and daily life. However, appropriate evaluation, intervention protocol, and guidelines for the treatment of feeding disorders in ASD are limited. Therefore, a complex approach based on a more systematic understanding is needed. Feeding rehabilitation specialists, such as occupational therapists, should provide appropriate evaluation and intervention.

• Research in Plant Disease
• /
• v.30 no.2
• /
• pp.199-205
• /
• 2024

Erwinia amylovora, a causal pathogen of fire blight, has been continuously inducing damage to the apple and pear trees in South Korea since 2015. Farmers apply antibiotics during blooming season to prevent the fire blight. However, continuous use of antibiotics can induce the emergence of resistant bacteria, which consequently reduces control efficacy. In this study, we assessed the minimal inhibitory concentration (MIC) of streptomycin, using a total of 361 E. amylovora isolates that were collected from the six provinces of South Korea from 2019 to 2023. As a result, the MIC of streptomycin ranged from 0.5 to 4 ㎍/ml and the strA-strB genes were not identified from the isolates. The MIC was higher in the isolates from Gyeonggi-do, Gangwondo, and Chungcheongbuk-do compared to those from other three provinces. These results may bring broad attention to the use of streptomycin and aid in developing a management protocol for the occurrence of fire blight in South Korea.

• Smart Media Journal
• /
• v.13 no.6
• /
• pp.9-15
• /
• 2024

In recent trends, there has been an increase in 'Qshing' attacks, a hybrid form of phishing that exploits fake QR (Quick Response) codes impersonating government agencies to steal personal and financial information. Particularly, this attack method is characterized by its stealthiness, as victims can be redirected to phishing pages or led to download malicious software simply by scanning a QR code, making it difficult for them to realize they have been targeted. In this paper, we have developed a classification technique utilizing machine learning algorithms to identify the maliciousness of URLs embedded in QR codes, and we have explored ways to integrate this with existing QR code readers. To this end, we constructed a dataset from 128,587 malicious URLs and 428,102 benign URLs, extracting 35 different features such as protocol and parameters, and used AutoML to identify the optimal algorithm and hyperparameters, achieving an accuracy of approximately 87.37%. Following this, we designed the integration of the trained classification model with existing QR code readers to implement a service capable of countering Qshing attacks. In conclusion, our findings confirm that deriving an optimized algorithm for classifying malicious URLs in QR codes and integrating it with existing QR code readers presents a viable solution to combat Qshing attacks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.64-71
• /
• 2024

The most critical aspect of full-arch prosthodontic treatment is evaluating whether the patient's vertical occlusal dimension is appropriate, and if necessary, restoring it through increasing vertical dimension. If the vertical occlusal dimension is too low, it can lead to reduced chewing efficiency, as well as not only aesthetic concerns but also potential issues like hyperactivity of muscles and posterior displacement of the mandible. This report is about the patient dissatisfied with pronunciation and aesthetics due to an inappropriate vertical occlusal dimension resulting from prior prosthetic interventions, underwent full-arch prosthodontic restoration treatment. Through the utilization of digital diagnostic apparatus, a comprehensive evaluation was undertaken for patient's vertical occlusal dimension, occlusal plane orientation, and the condition of prosthetic restorations. Through 3D facial scanning, the facial landmarks were discerned, and subsequently, the new occlusal plane was established. This provided the foundation for a digitally guided diagnostic wax-up. An elevation of 5 mm from the incisor was determined. Comprehensive dental rehabilitation was then executed for all remaining teeth, excluding the maxillary four incisors. The treatment protocol followed a systematic approach by initially creating implant-supported restorations on both sides of the dental arch to establish a stable occlusal contact. Subsequently, prosthetic restorations for the natural dentition were generated. Diagnostic and treatment planning were established through the utilization of facial scanning. This subsequently led to a reduction in treatment complexity and an expedited treatment timeline.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.149-164
• /
• 2024

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blend^TM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC^TM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT^TM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.3
• /
• pp.393-401
• /
• 2024

Recently, the Internet of Things (IoT) has been widely used in industries and daily life that directly affect human safety, life, and assets. However, IoT devices, which need to meet low-cost, lightweight, and low-power requirements, face a significant problem of shortened battery lifetime due to battery draining attacks and interference. To solve this problem, the 802.11ba standard for the Wake-up Receiver (WuR) has emerged, this feature is playing a crucial role in minimizing energy consumption. However, the WuR protocol did not consider security mechanisms in order to reduce latency and overhead. Therefore, in this study, anAdaptive Power Saving Mechanism (APSM) is proposed for low-power WuR to counter battery draining attacks. APSM can minimize abnormally occurring power consumption by exponentially increasing power-saving time in environments prone to attacks. According to experimental results, the proposed APSM improved energy consumption efficiency by a minimum of 13.77% compared to the traditional Legacy Power Saving Mechanism (LPSM) when attack traffic ratio is 10% or more of the total traffic.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.83-89
• /
• 2024

After the end of the service of Internet Explorer, the use of ActiveX ended, and the Non-ActiveX policy spread. HTML5 is used as a standard protocol for web pages established based on the Non-ActiveX policy. HTML5, developed in the W3C(World Wide Web Consortium), provides a better web application experience through API, with various elements and properties added to the browser without plug-in. However, new security vulnerabilities have been discovered from newly added technologies, and these vulnerabilities have widened the scope of attacks. There is a lack of research to find possible security vulnerabilities in HTML5-applied websites. This paper proposes a model for detecting tags and attributes with web vulnerabilities by detecting and analyzing security vulnerabilities in web pages of public institutions where plug-ins have been removed within the last five years. If the proposed model is applied to the web page, it can analyze the compliance and vulnerabilities of the web page to date even after the plug-in is removed, providing reliable web services. And it is expected to help prevent financial and physical problems caused by hacking damage.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.389-406
• /
• 2011

As part of a feasibility study for introducing carbon labeling of fruit products in Korea, we explore the use of carbon footprints for Korean kiwifruit from Gyeongnam region as a case study. In Korea, the Korean Environmental Industry and Technology Institute (KEITI) is responsible for the carbon footprint labeling certification, and has two types of certification programs: one program focuses on climate change response (carbon footprint labeling analysis) and the other on low-carbon products (reduction of carbon footprints analysis). Currently agricultural products have not yet been included in the program. Carbon labeling could soon be a prerequisite for the international trading of agricultural products. In general the carbon footprints of various agricultural products from New Zealand followed the methodology described in the ISO standards and conformed to the PAS 2050. The carbon footprint assessment focuses on a supply chain, and considers the foreground and the background systems. The basic scheme consists of four phases, which are the 'goal', 'scope', 'inventory analysis', and 'interpretation' phases. In the case of the carbon footprint of New Zealand kiwifruit the study tried to understand each phase's contribution to total GHG emissions. According to the results, shipping, orchard, and coolstore operation are the main life cycle stages that contribute to the carbon footprint of the kiwifruit supply chain stretching from the orchard in New Zealand to the consumer in the UK. The carbon emission of long-distance transportation such as shipping can be a hot-spot of GHG emissions, but can be balanced out by minimizing the carbon footprint of other life cycle phases. For this reason it is important that orchard and coolstore operations reduce the GHG-intensive inputs such as fuel or electricity to minimize GHG emissions and consequently facilitate the industry to compete in international markets. The carbon footprint labeling guided by international standards should be introduced for fruit products in Korea as soon as possible. The already established LCA methodology of NZ kiwifruit can be applied for fruit products as a case study.

• Journal of Chest Surgery
• /
• v.43 no.1
• /
• pp.20-24
• /
• 2010

Background: Fulminant myocarditis is a rare, but life threatening condition. Its prognosis is related with proper management in the acute phase. A cardiopulmonary support device can be very useful in this phase. We report on our experiences with managing acute fulminant myocarditis with a cardiopulmonary support (CPS) device. Material and Method: We reviewed retrospectively 9 patients who had a CPS device used for their fulminant myocarditis between September, 2006 and October, 2008. A Capiox emergency bypass system (Terumo Inc, Tokyo, Japan) was percutaneously inserted in all the patients. Upon implantation, all the patients were in cardiogenic shock because of ventricular arrhythmia or severe left ventricular dysfunction. The mean left ventricular ejection fraction (EF) was $20{\pm}6%$ according to transthoracic echocardiography. Result: 3 patients died despite CPS. The CPS was bridged to a transplanted heart in one patient. The rest were successfully explanted after a mean time of $107{\pm}70$ hours of running. The mean EF after discharge was $56{\pm}7%$ without dilated cardiomyopathy. Conclusion: Fulminant myocarditis can be fatal, but its prognosis is excellent if these patients receive proper, timely treatment. A cardiopulmonary support device can be very useful in this acute period. However, the implantation and management protocol of cardiopulmonary support are not yet settled. Further study is necessary to lower the complications of cardiopulmonary support for patients with fulminant myocarditis.