• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.358-364
• /
• 2022

The Inter Communication System for avionics is in charge of processing all voice signals that internal calls between Pilot and Co-pilot, internal calls between Pilots and Crews, external calls through communication equipment such as Ultra/Very High Frequency Receiver/Transmitter(U/VHF RT), audio signal monitoring for navigation and mission equipment such as VHF Omnidirectional Range/Instrument Landing System(VOR/ILS), Tactical Air Navigation(TACAN), audio signal output for voice recording to Flight Data Recorder(FDR) and Data Transfer System(DTS), and warning/caution audio signal generate about the status and threat of aircraft. Because Inter Communication System for avionics is sensitive to noise in the case of analog audio signals, a redundant design that can protect audio signal from electromagnetic noise inside/outside of aircraft is required for the mission of pilots and crews. In this paper, Normal/Back-up operation mode and redundancy design plan based on digital method for the redundancy of the digital Inter Communication System for avionics and manufacturing, verification results are described.

• Elastomers and Composites
• /
• v.56 no.4
• /
• pp.243-249
• /
• 2021

The demand for truck bus radial (TBR) tires with enhanced fuel efficiency and wear resistance have grown in recent years. In addition, as the issue of particulate matter and air pollution increases, efforts are being made to reduce the generation of particulate matter. In this study, we investigated the effect of varying the content of butadiene rubber (BR) on the properties of the rubber compounds and the amount of particulate matter in the TBR tire tread compound. Furthermore, we utilized carbon black in the NR/BR blend compounds owing to its excellent compatibility, and we used silica in the ENR-25/BR blend compounds because it can interact chemically with epoxide groups. The NR/BR blend compounds and the ENR-25/BR blend compounds were evaluated by varying their BR content between 20 phr and 30 phr. The results showed that the ENR-25/BR blend compounds had superior wear resistance than the NR/BR blend compounds. This was caused by the interaction between silica and ENR. In addition, it was confirmed that the increased wear resistance as the BR content increased. Furthermore, compared to the NR/BR blend compounds, ENR-25/BR blend compounds exhibited a lower tan 𝛿 value at 60℃ because silica was used as filler. This indicates a higher fuel efficiency. The measurement results for wear particulate matter showed that as increasing the BR content resulted in generation of less wear particulate matter. This was caused by the increased wear resistance. Moreover, the ENR-25/BR blend compounds with excellent filler-rubber interaction exhibited lower quantities of generated wear particulate matters as compared to the NR/BR blend compounds.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.52-64
• /
• 2023

This paper concentrated on estimating the travel time value of individual regional bus passengers in various in-vehicle crowding conditions. In the analysis model, the traffic-selection data of individual transportation passengers based on smart-card data were used. Variables which reflect the level of in-vehicle crowding and the variables of in-vehicle travel time that reflect the level of in-vehicle crowding were included in the model using Box-Cox transformation. The result of this paper indicates that the travel time value experienced by individual users would increase as the in-vehicle crowding level increases. The smart card data used in this paper is considered to have significant implications in terms of conducting more sophisticated and realistic qualitative research to reflect the values of variables for in-vehicle traffic hours and in-vehicle crowding levels, which previously had limitations in observation and quantification. It is expected that the effects of improvement measures for reducing congestion on regional buses can be considered quantitatively by applying the estimation results of crowding multiplier.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1097-1108
• /
• 2023

Recently, demand for technology for energy economy and stable supply is increasing due to the increase in power demand of loads. The amount of DC power generation using new and renewable energy is noticeably increasing, and the use of DC power supplies is also increasing due to the increase in electric vehicles and digital loads. During parallel operation to increase the capacity of the power converter, the module bus method or the method using Can communication and serial communication has significant difficulties in smooth operation due to communication time delay for information sharing. Synchronization of information sharing of each power converter is essential for smooth parallel operation, and minimization of communication time delay is urgently needed as a way to overcome this problem. In this paper, a new communication method using pulse width information is proposed as a communication method specialized for parallel operation of power converters to compensate for the disadvantage of communication transmission delay in the existing system. The proposed communication method has the advantage of being easily implemented using the PWM and Capture function of the microcomputer. In addition, the DC/DC converter for DC distribution was verified through simulation and experiment, and it has the advantage of easy capacity expansion when applied to parallel operation of various types of power converters as well as DC/DC converters.

• Journal of Space Technology and Applications
• /
• v.3 no.4
• /
• pp.355-372
• /
• 2023

As the need for low-cost, high-efficiency cubesats develops in the new space age, commercial paradigms are shifting in the private sector. This paper examines the challenges of launching and operating both domestic and foreign cubesats, and proposes practical solutions to ensure the robustness and reliability of the satellites from a practical perspective. In particular, the paper deals with checkpoints that are easy to miss, focusing on key events that can occur from the satellite deployment process through normal mode to mission mode in the operation scenario. Although the contents presented in this paper may not be technically applicable to all cubesat systems due to the different nature of each satellite bus system, they will be of some help during satellite assembly, integration and testing.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.459-465
• /
• 2024

The flight control computer applied to manned/unmanned aircraft is one of the key components directly connected to the control of the aircraft, and is generally designed with a redundant architecture so that essential functions for flight can be maintained even if a failure occurs in a single channel. The operational flight program loaded on these redundant flight control computers should be designed considering a time synchronization between channels, input data selection methods from redundant sensors, and fault detection/isolation methods for channels. In this paper, we propose a redundancy management method applied to triplex compact flight control computers for advanced air vehicle. The proposed redundancy management method includes a synchronization algorithm between triplex channels, an input data voting method from sensors, a bus control right selection method for control command output, and a fault detection/isolation method for channels.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.233-243
• /
• 2008

Recognition for the importance and roles of public transportation is increasing because of traffic problems in many cities. In spite of this paradigm change, previous researches related with public transportation trip assignment have limits in some aspects. Especially, in case of multimodal public transportation networks, many characters should be considered such as transfers. operational time schedules, waiting time and travel cost. After metropolitan integrated transfer discount system was carried out, transfer trips are increasing among traffic modes and this takes the variation of users' route choices. Moreover, the advent of high-technology public transportation card called smart card, public transportation users' travel information can be recorded automatically and this gives many researchers new analytical methodology for multimodal public transportation networks. In this paper, it is suggested that the methodology for establishment of brand new multimodal public transportation networks based on computer programming methods using transportation card data. First, we propose the building method of integrated transportation networks based on bus and urban railroad stations in order to make full use of travel information from transportation card data. Second, it is offered how to connect the broken transfer links by computer-based programming techniques. This is very helpful to solve the transfer problems that existing transportation networks have. Lastly, we give the methodology for users' paths finding and network establishment among multi-modes in multimodal public transportation networks. By using proposed methodology in this research, it becomes easy to build multimodal public transportation networks with existing bus and urban railroad station coordinates. Also, without extra works including transfer links connection, it is possible to make large-scaled multimodal public transportation networks. In the end, this study can contribute to solve users' paths finding problem among multi-modes which is regarded as an unsolved issue in existing transportation networks.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.14-25
• /
• 1999

The IEEE standard 1149.1, which was proposed to increase the observability and the controllability in I/O pins, makes it possible the board level testing. In the boundary-scan environments, many shift operations are required due to their serial nature. This increases the test application time and the test application costs. To reduce the test application time, the method based on the parallel opereational multiple scan paths was proposed, but this requires the additional I/O pins and the internal wires. Moreover, it is difficult to make the designs in conformity to the IEEE standard 1149.1 since the standard does not support the parallel operation of data shifts on the scan paths. In this paper, the multiple scan path access algorithm which controls two scan paths simultaneously with one test bus is proposed. Based on the new algorithm, the new algorithm, the new board level BIST architecture which has a relatively small area overhead is developed. The new BIST architecture can reduce the test application time since it can shift the test patterns and the test responses of two scan paths at a time. In addition, it can reduce the costs for the test pattern generation and the test response analysis.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.49-64
• /
• 2008

Recently, many researches about making more comfortable input device based on gaze detection technology have been done in human computer interface. However, the system cost becomes high due to the complicated hardware and there is difficulty to use the gaze detection system due to the complicated user calibration procedure. In this paper, we propose a new gaze detection method based on the 2D analysis and a simple user calibration. Our method used a small USB (Universal Serial Bus) camera attached on a HMD (Head-Mounted Display), hot-mirror and IR (Infra-Red) light illuminator. Because the HMD is moved according to user's facial movement, we can implement the gaze detection system of which performance is not affected by facial movement. In addition, we apply our gaze detection system to 3D first person shooting game. From that, the gaze direction of game character is controlled by our gaze detection method and it can target the enemy character and shoot, which can increase the immersion and interest of game. Experimental results showed that the game and gaze detection system could be operated at real-time speed in one desktop computer and we could obtain the gaze detection accuracy of 0.88 degrees. In addition, we could know our gaze detection technology could replace the conventional mouse in the 3D first person shooting game.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1343-1350
• /
• 2012

This paper presents a new method for designing a dual-band WIFI antenna using the third-order harmonic mode of a monopole antenna whose first-order mode operates at the low frequency band of WIFI. As analysing the current distribution of the third-order mode of this monopole antenna, the strongest point of electric field can be found. Then by attaching a stub at this point, the resonant frequency of the stub radiator can be adjusted from the third-order mode of the monopole antenna into the high frequency band of WIFI and the input impedance at this resonant frequency can be controlled with the width of the branch, without affecting the low frequency band of WIFI (the first-order mode of the monopole antenna). The compact dual-band antenna is designed at the size of an USB(universal serial bus) dongle and the bandwidth covers 600 MHz(2.3~3 GHz) at 2 GHz and 1 GHz(4.9~5.9 GHz) at 5 GHz under -10 dB which is satisfied with WLAN frequency. Efficiency of proposed antenna achieves over 50 % at WLAN frequency.