• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.979-983
• /
• 2007

본 논문에서는 액정용 실드 케이스 (Shield Case)의 스트립 레이아웃 도 작성하였다. 프레스 금형에 있어서 스트립 레이아웃 도는 제품 양산을 결정하는 중요 요인이다. 장착되는 다른 부품과의 간섭요인을 용이하게 수정하기 위하여 3D CAD/CAM 시스템을 적용하였다. 블랭크 레이아웃을 최적화하고 광폭배열로 스트립 레이아웃 하여 재료 이용률을 60.17%로 향상시켰다. 또한 얇은 소재두께로 인해 변형 발생이 예상되는 노칭부위에 집중적으로 비딩공정을 추가하여 제품의 평탄도를 요구사항에 맞게 적용하였다. 사용된 3D CAD/CAM 소프트웨어는 Unigraphics NX 3.0이며 12개 공정으로 스트립 레이아웃 도를 작성하였다.

• 구강회복응용과학지
• /
• 제27권4호
• /
• pp.405-413
• /
• 2011

CAD-CAM기법과 CT의 도움으로 무판막임플란트 치료술식이 가능하게 되었다. 본 연구의 목적은 1년간 전향적 연구를 통해 이러한 술식의 신뢰성을 검토하고자 하였다. 하악무치악상태의 연속적인 환자 12명이 포함되었다. 71개의 임플란트가 이공사이에 $NobelGuide^{TM}$법을 이용하여 식립되었고 환자는 정해진 주기에 따라 검사되었다. 한 개의 임플란트가 조기실패하였으며 나머지는 만족할 만한 기능을 보였다. 연구기간 중 평균적인 변연골흡수량은 중앙부($0.3{\pm}0.1$ mm), 견치부($0.5{\pm}0.1$ mm), 원심부($0.7{\pm}0.2$ mm)였으며 임플란트 안정성 수치의 변화량은 중앙부($-1.05{\pm}2.76$ mm), 견치부($-0.85{\pm}2.59$ mm), 원심부($-1.27{\pm}2.18$ mm)를 나타내었고 위치간 통계학적인 차이는 없었다(P>.05). 본 전향적인 기초조사연구에서 CAD-CAM기반의 무판막임플란트 치료술식은 하악무치악환자에게 신뢰성 있는 술식이 될 수 있을 것으로 사료되었다.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.110-117
• /
• 2012

Dental computer-aided design (CAD) and computer-aided manufacturing (CAM) technology have rapidly progressed over the past 30 years. The technology, which can be used in the dental laboratory, the dental office and the form of production centers, has become more common in recent years. This technology is now applied to inlays, onlays, crowns, fixed partial dentures, removable partial denture frameworks, complete dentures, templates for implant installation, implant abutments, and even maxillofacial prostheses. Dentists and dental technicians, who want to use these techniques, should have certain basic knowledge about that. This article gives an overview of CAD/CAM technologies, histories and how it applies in prosthetic dentistry.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.486-495
• /
• 2017

The wide use of chairside CAD/CAM restorations has increased the diversity of the restorative material. For the practitioner, the selection of the appropriate material is difficult amongst the variety offered by the market. Information on the characteristics of the products can be difficult to assess due to the lack of up-to-date classification and the lack of reliability of manufacturer's advertising. The purpose of this article is to structure the data on restorative materials provided by various sources in order for the practitioner to choose the product most suited to the clinical situation. The objective is to classify chairside CAD/CAM materials and to define their characteristics and indications.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.422-428
• /
• 2006

In this paper, an NC data optimization approach for enhancing 5-axis machining speed is presented. It is usual to use expensive commercial CAD/CAM programs for NC data of 5-axis machining, since it needs very large calculations for optimal tool positioning and orientation, tool path planning, and collision-free tool path generation. Since commercial CAD/CAM systems have similar functions and efficiency based on common algorithms of reliable theories, they do not have their own unique features for machining speed and efficiency. In other words, most commercial CAD/CAM systems consider only the characteristics of part geometry to be machined, which means that they generate almost the same NC data if the part to be machined is the same, even though different machines are used for the pin. A new approach is proposed for optimizing NC data of 5-axis machining, which is based on the characteristics of the machine to be operated. As a result, the speed of 5-axis machining can increase without losing machining accuracy and surface quality.

• 대한기계학회논문집A
• /
• 제39권3호
• /
• pp.337-345
• /
• 2015

항공기에 사용하는 제트엔진을 생산하기 위해서는 고도의 절삭가공 기술이 필요하다. 항공기 엔진 가공업체들은 가공 시 발생할 수 있는 오류들을 방지하기 위해, CAM(computer-aided manufacturing) 기술을 도입하였다. 그러나 CAM 모델 생성을 위해서는, 작업자가 수 일에서 수 주 동안 CAD 모델을 기반으로 가공 연산을 일일이 생성해야 하는 문제가 있다. 이러한 문제 해결을 위해 본 논문에서는 CAD 모델로부터 구멍 가공 부분에 대한 CAM 모델의 자동 생성 방법을 제안한다. 이를 위해 CAD 모델에서 구멍 특징형상을 인식하고 이를 CATIA 의 가공 연산으로 변환하는 방법을 적용하였다. 또한 프로토타입 시스템의 구현을 통해 제안한 방법을 실험 및 검증하였다.

• The Journal of Advanced Prosthodontics
• /
• 제11권6호
• /
• pp.305-312
• /
• 2019

PURPOSE. The purpose of this study was to compare computer-aided design/computer-aided manufacturing (CAD/CAM) abutment and prefabricated abutment in Morse taper internal connection type implants after cyclic loading. MATERIALS AND METHODS. The study was conducted with internal type implants of two different manufacturers (Group Os, De). Fourteen assemblies were prepared for each manufacturer group and divided into 2 groups (n=7): prefabricated abutments (Os-P, De-P) and CAD/CAM abutments (Os-C, De-C). The amount of axial displacement and the removal torque values (RTVs) were measured before and after cyclic loading (10⁶ cycles, 3 Hz with 150 N), and the tensile removal force to dislodge the abutments was measured after cyclic loading. A repeated measures ANOVA and a pattern analysis based on the logarithmic regression model were conducted to evaluate the effect of cyclic loading on the axial displacement. The Wilcoxon signed-rank test and the Mann-Whitney test was conducted for comparison of RTV reduction% and tensile removal forces. RESULTS. There was no significant difference between CAD/CAM abutments and prefabricated abutments in axial displacement and tensile removal force; however, significantly greater RTV reduction% after cyclic loading was observed in CAD/CAM abutments. The correlation among the axial displacement, the RTV, and the tensile removal force was not significant. CONCLUSION. The use of CAD/CAM abutment did not significantly affect the amount of axial displacement and tensile removal force, but presented a significantly greater removal torque reduction% than prefabricated abutments. The connection stability due to the friction at the abutment-implant interface of CAD/CAM abutments may not be different from prefabricated abutment.

• 대한치과보철학회지
• /
• 제56권3호
• /
• pp.188-198
• /
• 2018

목적: 최근 디지털 기술의 발달과 더불어 치과영역에서도 다양한 보철물 제작을 위해 Computer aided design/computer aided manufacture (CAD/CAM) 시스템의 사용이 확대되고 있다. CAD/CAM 시스템은 전통적인 방식의 보철물 제작의 단점을 극복하여, 치과의사와 치기공사가 보철물을 제작할 때, 환자에게 한 두 번의 병원 방문으로도 정확하고 정밀도 높은 보철물의 제공이 가능하게 할 수 있다. 본 논문은 현재 국내의 CAD/CAM 시스템 현황 및 인식을 파악함으로써 새로 장비를 도입할 때 고려해야 할 항목에 대한 조언을 제공하고자 한다. 대상 및 방법: 본 설문 조사는 서울대학교 치과 병원을 포함한 전국 298 명의 치과의사, 치과위생사 및 치과기공사를 대상으로 2016년 11월부터 12월까지 2 개월간 우편을 통해 실시하였다. 결과: 치과용 CAD/CAM 밀링기 구매 시 가장 고려하는 요인은 밀링기의 성능(64.43%)이었으며 용도는 치과보철물 제작과 임플란트용 맞춤형 지대주 제작이 49.33%로 가장 높았다. 또한, 응답자의 약 60% 이상이 CAD/CAM 밀링기가 만족할 만한 성능으로 개선된다면 새로운 장비의 구매에 대해 긍정적인 답변을 보였다. 결론: 설문조사 분석결과, 성능이 개선된 CAD/CAM 밀링기 디지털화 및 4차 산업혁명을 대비하는 치과산업에서 중요한 역할을 할 것으로 여겨진다.

• 대한한의학회지
• /
• 제29권4호
• /
• pp.47-54
• /
• 2008

Objective: The purpose of this study was to investigate the disease burden of cancer, to investigate how many cancer patients use CAM (complementary and alternative medicine) therapies with or without conventional medicine, to know reasons for use of cancer CAM therapies, and finally to discuss viewpoints on treating cancer with traditional Korean medicine (TKM). Method: In order to know the disease burden of cancer, the prevalence and mortality of cancer patients of Korean, American, and WHO reports were investigated, and the usage of cancer CAM therapies was investigated in several reports. The viewpoints about cancer treatment with TKM were suggested with the characteristics of TKM. Results: One hundred thousand Korean people were diagnosed [in time period] as new cancer patients, and cancer patients are gradually increasing every year. Cancer is a leading cause of deaths in Korea and worldwide. From 21% to 63% of Korean cancer patients, 80% of American cancer patients, and 35.9% of European cancer patients used CAM therapies, and the most common therapy was an herbal therapy. Conclusions: TKM has been used to treat cancer since initial use of acupuncture and herbs with basic viewpoints on human health and disease. First, TKM regards occurrence of cancer as an environmental problem of the whole human being. Second, the pathologic concept centered on antipathogenic Qi (Zheong Qi) can reinforce the functioning of the patient's own natural vitality to overcome cancer. Third, TKM deals with cancer patients through mind, body, and spirit based on the monoism of mind and body.

• Perspectives in Nursing Science
• /
• 제3권1호
• /
• pp.73-89
• /
• 2006

Complementary and alternative medicine has gained popularity and respectability in recent years in the United States. Since aging is often associated with chronic health conditions that commonly lead to physical and psychosocial disabilities (e.g., depression, functional and/or cognitive disabilities, and decreased quality of life), older adults often seek options to maintain health and treat chronic conditions as an adjunct to conventional medical care. Herbal products, the most commonly used among various complementary and alternative medicines (CAM), should be used with caution due to potential herbal-drug interactions (related to polypharmacy) and herbal-disease interactions (related to comorbidities). Five of the most common chronic conditions in older adults are chronic pain, cardiovascular problems, hypertension, diabetes, and chronic lung problems. A high rate of falls or risk of falling is also a problem unique to this older population. For these conditions, only a few types of CAM (e.g., acupuncture, qi gong, tai chi) were tested, with promising results. However, in spite of evidence supporting the use of certain types of CAM to alleviate some common chronic conditions, findings are limited in terms of other types of CAM tested and both short and long-term effects. More rigorous clinical trials of various CAM types are thus warranted to advance scientific knowledge and establish evidence-based practices to care for the growing number of older adults who deserve to have a better quality of life.