• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.21-23
• /
• 2004

In this paper, an optimal design method to have good performance is researched. The parameters which are sensitive to the performance are examined and selected by using evolutionary computations and commercial CAD program to have good performance. Design method Simulated are compared with conrrentional procedure.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.137-146
• /
• 1988

Shrink-rings (stress-rings) are used in the fabrication of compaction dies to increase the allowable pressures for a given die material. This paper proposes a new approach, where the maximum allowable shrinking pressures are calculated on shrinked plans in the radial direction and then the fractional fitting pressures below the maximum shrinking pressures are used as the design values. A computer program, DIECAD, is developed. The paper presents two design cases as examples in order to easily illustrate the design procedures from the computer program DIECAD

• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.542-554
• /
• 2002

The purposes of this study were to investigate, analyze, and consider the feature and practical situation of Apparel CAD education and distribution situation of CAD system so that CAD education can be effectively operated and managed in various kinds of relevant schools and universities. 32 colleges and universities that are performing CAD educational system are selected for the study. The author of the study has investigated and obtained the information through questionnaires to 32 professors who are in charge of CAD lectures and 301 students who are receiving CAD education. The result is as follows. 1. It showed that 62.5% of CAD educational systems have been practically introduced after 1995. Regarding the using system, YUKA occupies 46.9%, PAD 21.8%, and GERBER 18.8% and these three kinds of system have been chiefly supplied. 40.6% of them own only one system, 37.5% of them own 2～5 systems and 78% of them own less than 5 systems. 2. The most seriously pointed problems during the operation of CAD system were the lack of experimental materials and the frustration of manpower supply. Thus, the CAD education programs in schools and universities are practiced in inferior environments internally and externally. 3. Regarding the practical situation of CAD education, 28 among 32 schools and universities are performing CAD as one of the regular subjects for the curriculum. 4. Regarding satisfaction degree of the using system, professors showed higher satisfaction degree than students did. In conclusion, it showed that although the practical situations of CAD education in schools and universities have been changed and improved so much since 1995 owing to the increase of the positive recognition of the necessity of CAD, many students in the educational sites cannot study their favorite subjects related with CAD program with interest due to the lack of experimental facilities, the poor computer management systems, and the problems of manpower supply, etc.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.43-54
• /
• 2014

In textile industry, needs for various weave drafts have been increased to produce high qualified textile goods. One of disadvantages of traditional textile industry was spending time and money on manual sampling. Nowadays, however, weave draft design and sampling using CAD programs reduce these consumption efficiently. Therefore, this study aimed to provide high qualified woven fabrics by weave draft designs influenced by geometric patterns. First, We analyzed geometric patterns, except for dot, stripe, and checks, in fashion collections from 2009 to 2014 S/S. Then, based on these analyses, design concepts were decided. Third, weave drafts influenced by geometric patterns were designed with weave CAD program, TEX PRO 10.0 by Youngwoo CNI inc. Forth, We simulated fabrics woven by new drafts using CAD programs, depending on fibers, yarns, density of woven, colors, and finishes. Unclassified geometric patterns would be expressed by small size patterns that influenced by retro moods, square patterns with various color variation, zigzag lines, and pieces of puzzles. Three design concepts were decided as greenness, neoclassic, and romantic chic. Thus, geometric patterns for printing were created as drafts for general looms, and one repeat of each draft were provided. According to the design concepts, we designed 13 fabrics with 4 geometric patterns weaving drafts. All Drafts were designed with CAD programs. Finally, same drafts were simulated as woven fabrics for both S/S and F/W seasons by changing each element, such as fiber, yarns, density, colors, and finishes.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.117-124
• /
• 2012

The importance of the digital architecture is increasing more ever. Currently, CAD and 3D programs are used as design fields, but the BIM (building information modeling) is gradually interested. BIM is mandatory on the project more than 50 billion won ordered by the government since 2012, it will be expanded to a total of government orders by 2016. University needs to evaluate teaching methods and computer-aided design environments such as CAD and BIM. In this paper, we surveyed computer-aided design environments and teaching methods for 73 students at the J University of Department of architectural engineering. Main results are as follows: 1. Hardlock is uncomfortable but necessary program for the computer management. 2. The desk placement considering the behavior of the design students results in higher satisfaction. 3. Because a CAD subject was a difficult course content and progress is fast, students thought it is difficult to follow. Especially, first-year students answered it is difficult to learn program and understand the structure of the building at the same time. 4. First-year students want to learn CAD more. Second-, third-, fourth-year students want to learn Photoshop more. Supplement for these classes is required. 5. Students answered that a teaching method of a CAD subject would be good to their own practice after the professor demonstrates for students. The senior's assistance is also a high effective way in the class. 6. During class, students' activities such surfing the web and Kakao Talk on a smartphone disrupt the class, there is a need to regulate by a rule such as disconnect computers from a network and against using smartphone. Although the Internet with the popularization of smartphones confers a benefit on modern life, it causes damage to us. This is a hard part for a salaried workers as well as students studying equally. The self management is required and a professor needs to control and restraint in a university classroom. The professor's continuing interest to students can increase the effectiveness of learning.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.137-151
• /
• 2012

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

• Journal of Fashion Business
• /
• v.23 no.1
• /
• pp.37-48
• /
• 2019

WKSF (Warp-knitted spacer fabrics) knitted using a double Raschel machine is the three-dimensional knit that has vertically connected separate layers in loop structures. Because of its unique structure, the fabric is light, compressible and breathable. Owing to the high production speed, the use of the fabric is increasing in various areas. The purpose of this study is to establish the design process in the utilization of WKSF program and analyze the difference between WKSF and Neoprene as garment materials.. The study on the design related to WKSF has rarely been carried out because of the complexity of WKSF structure and the difficulties encountered in analyzing the structure and thread. Therefore, checking beforehand the simulation results similar to a final knit using the CAD program for WKSF can only enhance the efficiency of the design for the light knits. The conclusion drawn after designing the light knits using the CAD program and analyzing the pros and cons of WKSF through the various property evaluation techniques is as follows. The tension characteristic analysis results indicated that Neoprene specimen has the elastic transformation and resilience, thus behaving like an elastic product such as rubber. By contrast, in the event that clothing and fashion accessories are designed with WKSF, these products are kept in a boxy style fit so that the fabric can be applied flexibly to a curvy body line. In addition, WKSF is good in forming noticeably around a curvy body, because its resistance shear deformation is lower than that of Neoprene.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.481-482
• /
• 2008

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.54-57
• /
• 2004

In this paper, an optimal design method to have a good performance is researched. The parameters which are senstive to the performance are examined and determined by using evolutionary computations and commercial CAD program to have a good performance. Design method simulated is compared with conventional procedure.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.24-34
• /
• 1982

In order to improve the digging load capacity of a domestic excavator model. computer aided design(CAD) technique was applied to the optimum design of the excavator boom. From this study, the digging load capacity of both the bucket cylinder and the dipperstick cylinder could be made about same and the overall digging load capacity could be increased by about 50%, also, the computer program package developed in this study can be flexibly applied to the design of other construction machines by changing and/or adding a few subprograms and the input data.