• Resources Recycling
• /
• v.22 no.6
• /
• pp.41-47
• /
• 2013

In this study, deoxidation of Ti scrap using liquid calcium was investigated. Experiments were conducted in a closed stainless steel chamber under Ar atmosphere during 30 to 90 minutes. Oxygen content of Ti scrap was reduced from 0.54 to 0.19 wt% by calciothermic reduction in 30 minutes at $1000^{\circ}C$ and 2.5 Ti/Ca mass ratio. By the calciothermic reduction of Ti scrap for 30 minutes under the reaction temperature of $1100^{\circ}C$ and 2.5 Ti/Ca mass, a minimum oxygen content of about 0.126 wt% in Ti scrap was obtained.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.466-472
• /
• 2013

This study was performed to determine the effects of the pretreatment and cold-vacuum drying methods on the physicochemical properties and antioxidant activities of dried peaches. Moisture content was significantly lower with 0.3% NaCl treatment with cold-vacuum drying. The pH, brix and acid ratio (SS/TA) were the lowest with 1.0% soluble Ca treatment, while soluble solid and SS/TA were significantly higher with 0.1% vitamin C treatment compared to those with other treatments. The ${\delta}E$ and browning degree was lower in the pretreated sample compared to the untreated sample. Cutting strength of dried peaches was highest in the pretreated samples, and it was the highest with 1.0% soluble Ca treatment. Total sugar content with 0.1% vitamin C and 1.0% soluble Ca treatment was significantly higher than that with 0.3% NaCl treatment. The free sugar content was lower with 0.3% NaCl treatment but it was higher with 0.1% vitamin C and 1.0% soluble Ca treatment. The sensory evaluation result was highest with 0.1% vitamin C treatment. Phenolic compounds and antioxidant ability were the highest with the 0.1% vitamin C and 0.1% soluble Ca treatment; all the dried peaches showed relatively high antioxidant activities. These results suggest that pretreatment can affect the quality of dried peaches, showing that cold-vacuum drying can be applied for the production of high quality dried peach products.

• Journal of the Korean Ceramic Society
• /
• v.23 no.5
• /
• pp.35-40
• /
• 1986

The early hydration of tri-calcium silicate $(C_3S)$ with different cooling conditions was studied by varing water/solid ratio and atmosphere. The cooling condition and water/solid ratio affected to the second peak of heat liberation but it had no correlation to the induction period. The $Ca^{2+}$ concentration in the aqueous solution was maximized at the starting point of the second peak of heat liberation but in the $CO_2$ exsistence the $Ca^{2+}$ concentration was low and $SiO_2$ con-centration was increased. The hydration rate of $C_3S$ was so accelerated that the induction period could not appear in the $CO_2$ exsistence.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.43-45
• /
• 2012

The effect of limestone characteristics on in-furnace desulfurization was experimentally investigated at hot gas combustion condition in a drop tube furnace (DTF). Flue gas was measured by Gas analyzer in order to figure out $SO_2$ content. The experiments were performed under excess sulfur 3000ppm condition to examine the effect of operating variables such as reaction temperatures, Ca/S ratios on the $SO_2$ removal efficiencies. The results show that the $SO_2$ removal efficiency increased with reaction temperature and Ca/S ratio increase. When considering the economics, $1200^{\circ}C$ and Ca/S ratio 2 condition is optimized to reduce $SO_2$ emission.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.324-328
• /
• 1991

The Li$_2SO_4$ system containing various mol${\%}$ of CaSO$_4$ were synthesized. The structure and the electrical conduction of these system were studied at the temperature from 20 to 700$^{\circ}C$. In the region of CaSO$_4$ mol ratio higher than 0.05, it could be confirmed that Li$_2SO_4-CaSO_4$ system does not form solid solution. Due to the substituted Ca$^{2+}$, the transition temperature (monoclinic to cubic) is shifted to the low temperature. The ionic conduction of monoclinic Li$_2SO_4-CaSO_4$ increased with increasing lithium vacancy which was produced by substituted Ca$^{2+}$, but that fcc Li$_2SO_4-CaSO_4$ was not influenced by the substituted Ca$^{2+}$ ion.

• Clean Technology
• /
• v.8 no.4
• /
• pp.217-222
• /
• 2002

The effects of initial cadmium ion concentrations (50, 100, 200, 300ppm), and feeding velocities (30, 45, 60mL/hr) on the removal ratio of cadmium ion by Pseudomonas aeruginosa ATCC 27853 immobilized in Ca-alginate gel beads in a packed-bed column reactor were investigated at operating temperature $37^{\circ}C$. The removal ratio of cadmium ion with variable initial concentration was decreased in the following order : 50ppm > 100ppm > 200ppm > 300ppm. The optimum removal conditions of cadmium ion by Pseudomonas aeruginosa ATCC 27853 were initial concentration 50ppm, feeding velocity 30mL/hr.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.68-74
• /
• 2010

The aim of this study is to investigate the behaviors of synthesis of Calcium Chloroaluminte($11CaO{\cdot}7Al_2O_3{\cdot}CaCl_2$) under the melting temperature of municipal solid waste incineration fly ash(MSWI fly ash); $900^{\circ}C-1300^{\circ}C$ of sintering temperature. A sludge generated from a water purification plant (SW) was also used to fill up $Al_2O_3$ source, which might be deficient in MSWI fly ash. MF and SW were mixed at mixing ratio of 10 to 7, which is the mole ratio of CaO to $Al_2O_3$ of calcium Chloroaluminte. Mixed samples were sintered in the opened sintering reactor and the closed sintering reactor, respectively. The results showed that calcium chloroaluminte was formed at $1,000^{\circ}C$ in both reactors, but the temperature of decomposition of calcium chloroaluminte depended upon sintering reactor type; an opened sintering reactor and a closed sintering reactor, owing to the vaporization velocity of Cl.

• Carbon letters
• /
• v.12 no.1
• /
• pp.31-38
• /
• 2011

This study experimentally investigated dicyclohexylammonium 2-cyanoacrylate (CA) as a potential comonomer for polyacrylonitrile (PAN) based carbon fiber precursors. The P(AN-CA) copolymers with different CA contents (0.19-0.78 mol% in the feed) were polymerized using solution polymerization with 2,2-azobis(isobutyronitrile) as an initiator. The chemical structure and composition of P(AN-CA) copolymers were determined by proton nuclear magnetic resonance and elemental analysis, and the copolymer composition was similar to the feeding ratio of the monomers. The effects of CA comonomer on the thermal properties of its copolymers were characterized differential scanning calorimetry (DSC) in nitrogen and air atmospheres. The DSC curves of P(AN-CA) under nitrogen atmosphere indicated that the initiation temperature for cyclization of nitrile groups was reduced to around $235^{\circ}C$. The heat release and the activation energy for cyclization reactions were decreased in comparison with those of PAN homopolymers. On the other hand, under air atmosphere, the P(AN-CA) with 0.78 mol% CA content showed that the initiation temperature of cyclization was significantly lowered to $160.1^{\circ}C$. The activation energy value showed 116 kJ/mol, that was smaller than that of the copolymers with 0.82 mol% of itaconic acids. The thermal stability of P(AN-CA), evidenced by thermogravimetric analyses in air atmosphere, was found higher than PAN homopolymer and similar to P(AN-IA) copolymers. Therefore, this study successfully demonstrated the great potential of P(AN-CA) copolymers as carbon fiber precursors, taking advantages of the temperature-lowering effects of CA comonomers and higher thermal stability of the CA copolymers for the stabilizing processes.

• Korean Journal of Environment and Ecology
• /
• v.28 no.5
• /
• pp.566-573
• /
• 2014

Decay rate and nutrient dynamics during leaf litter decomposition of deciduous broad leaf Quercus mongolica and evergreen needle leaf Pinus densiflora were investigated for 69 months from December 2005 to September 2011 in Mt. Worak National Park as a part of National Long-Term Ecological Research Program in Korea. Percent remaining weight of Q. mongolica and P. densiflora leaf litter after 69 months elapsed was $35.4{\pm}2.3%$ and $16.1{\pm}1.3%$, respectively. Decomposition of P. densiflora leaf litter was significantly faster than that of Q. mongolica leaf litter. Decay constant (k) of Q. mongolica and P. densiflora leaf litter after 69 months elapsed was 5.97 and 10.50, respectively. Initial C/N and C/P ratio of Q. mongolica leaf litter was 43.1 and 543.9 respectively. After 69 months elapsed, C/N and C/P ratio of decomposing Q. mongolica leaf litter decreased to 8.7 and 141.2, respectively. Initial C/N and C/P ratio of P. densiflora leaf litter was 151.2 and 391.4, respectively. After 69 months elapsed, C/N and C/P ratio of decomposing P. densiflora leaf litter decreased to 22.9. and 136.5. respectively. Initial concentration of N, P, K, Ca and Mg in leaf litter was 9.30, 0.23, 2.36, 3.14, 1.11 mg/g in Q. mongolica, and 3.02, 0.09, 1.00, 3.84, 0.62 mg/g in P. densiflora, respectively. Initial concentration of N and P in Q. mongolica leaf litter was significantly higher than those in P. densiflora. After 69 months elapsed, remaining N, P, K, Ca and Mg in decomposing leaf litter were 73.8, 60.9, 17.2, 20.3, 35.1 % in Q. mongolica, and 69.5, 75.3, 12.3, 10.9, 10.8 % in P. densiflora, respectively.