• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.73.1-73.1
• /
• 2011

석탄가스화 복합발전(IGCC) 시스템은 고온 고압으로 운전되는 가스화기에서 미분탄을 산소와 함께 가스화하여 주로 CO 및 $H_2$를 생성하고 이때 발생되는 먼지 및 황성분은 각각 집진기 및 탈황장치에서 제거되며, 석탄 회분은 고온에서 용융되어 슬래그의 형태로 배출되는 방식을 사용하고 있다. 본 연구에서는 석탄가스화 복합발전시스템 설계에 필요한 기본자료를 파악하기 위해서, 고온 고압의 운전조건에서 1일 3톤의 석탄을 처리할 수 있는 Bench Scale급 석탄가스화기를 이용하여 가스화에 사용된 원탄 및 가스화기 설비의 각 지점에서 샘플링한 고체 시료를 중심으로 열화학적 특성을 살펴보았다. 가스화 실험은 아역청탄 계열의 ABK 석탄을 대상으로 가스화기 내부의 온도와 압력을 $1400{\sim}1450^{\circ}C$, $7.5{\sim}7.6Kg/cm^2$로 유지시키면서 실시하였다. 실험에 사용된 석탄 시료의 기본적인 물성치를 조사하기 위하여 표준방법에 따라 석탄의 공업분석, 원소분석, 발열량분석 등을 실시하였다. 석탄가스화기에서 배출된 슬래그와 대상 석탄 회분의 특성을 파악하기 위해서 XRF를 이용한 회분의 성분분석, Heating Microscope를 이용한 회분의 용융점 분석, XRD를 이용한 회분과 슬래그내의 화합물의 형태 및 결정구조 파악, SEM을 이용한 슬래그의 형상 등을 분석하였다. 또한 석탄가스화기 시스템을 구성하는 각 설비의 특성을 파악하기 위해서 관련 설비의 특정 지점에서 채취한 시료의 입도분석, 원소분석, 촤 회분 무게비, 슬래그중의 잔존탄소함량, 슬래그와 슬래그로부터 제조된 용출수내의 중금속 함량분석 등을 실시하였다.

• Journal of the korean society of oceanography
• /
• v.38 no.3
• /
• pp.135-142
• /
• 2003

Gas flux across the air-sea interface is often determined by the product of gas transfer velocity k) and the difference of concentrations in water and air. k is primarily controlled by wind stress on the air-sea interface, thus all parameterizations ofk involve wind speed, a rough indicator of wind stress, as one of the independent variables. We attempted to explore the spatial and temporal variations of k in the East (Japan) Sea using a database from Naet al. (1992). Three different parameterizations were employed: those of Liss and Merlivat (1986), Wanninkhof(1992), and Wanninkhofand McGillis (1999). The strong non-linear dependence of k on wind speed in all parameterizations leads us to examine the effect of time resolution, in which the binned wind speeds are averaged, on the estimation ofk. Two time resolutions of 12 hours (short-term) and one month (long-term) were chosen. The mean wind speeds were fed into the given parameterizations, resulting in six different transfer velocities of $CO_2$ ranging from 12 to 32 cm/h. In addition to the threefold difference depending on the choice of parameterization, the long-term average of wind speed results in a value ofk up to 20% higher than the short-term (12 hours) average of wind speed due to the non-Rayleigh wind distribution in the East (Japan) Sea. While it is not known which parameterization is more reliable, this study proposes that the time-averaged wind speed should not be used in areas where non-Ralyleigh wind distribution prevails such as the East (Japan) Sea. The net annual $CO_2$ flux was estimated using the value of k described above and the monthly ${\Delta}fCO_2$ of Oh et al. (1999); this ranges from 0.034 to 0.11 Gt-C/yr.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.602-609
• /
• 2012

Burkholderia anthina R-4183, Burkholderia diffusa R-15930 and Burkholderia stabilis LMG 14294 isolated from green house soils (Gongju-Gun area, South Korea) were characterized and their phosphate solubilizing ability was assessed. Under in vitro culture conditions, all three species were proved to be effective in solubilizing phosphates in varying degrees. Strain Burkholderia anthina exhibited the highest phosphate solubilization in NBRIP medium ($665{\mu}g\;ml^{-1}$) followed by Burkholderia diffusa ($630{\mu}g\;ml^{-1}$) and Burkholderia stabilis ($578{\mu}g\;ml^{-1}$). However, solubilization of $FePO_4$ and $AlPO_4$ was found to be poor in all the strains. Acidification by means of gluconic and oxalic acids accumulation in the culture medium could be the possible mechanism responsible for phosphate solubilization. Glucose at the rate of 3% was found be the best carbon source for Burkholderia anthina while other two Burkholderia species showed maximum phosphate solubilization at 2% of glucose. In the case of nitrogen sources, ammonium and nitrate were equally effective in solubilizing phosphates by Burkholderia species. Despite a slight decrease in phosphate solubilization observed at increasing temperature, all three Burkholderia species could withstand a temperature of $30-35^{\circ}C$, pH at the range of 7-9 and the presence of NaCl (up to 2.5%) without much compromising the phosphate solubilization. As shown with potted mung bean seedlings, all the three isolates could enhance soil fertility and plant growth indicating their great potential to be used as bio-inoculants.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.70-76
• /
• 2011

High-quality double-walled carbon nanotubes (DWCNTs) were synthesized by catalytic decomposition method at $800^{\circ}C$ using Tetrahydrofuran. The as-synthesized DWCNTs typically have catalytic impurities and amorphous carbon, which were removed by two-step purification process, consisting of thermal oxidation and H2O2, HNO3, HCl treatment. The DWCNT suspension was prepared by dispersing the purified DWCNTs in an aqueous sodium dodecylbenzenesulfonate solution with horn-type sonication. This was then sprayed on ITO glass to fabricate CNT field emitters. The quality of purified DWCNTs was estimated with X-ray diffraction and Thermal Gravity Analysis. The field emission properties were improved by increasing the process time of HCl treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.36-50
• /
• 1995

The purpose of this study was 1) to estimate the improvement of thermal storage/release and moisture transport properties of PEG-treated acrylic athletic socks and suggest the optimum add-on for PEG treatment, 2) to investigate wear performance of untreated cocks and two kinds of socks treated with PEG of minimum and optimum add-on respectively, and 3) to consider the effect of thermal storage/release and moisture transport properties of PEG- treated socks on the wear performance and the subjective comfort zone. Thermal activities of specimens treated by PDC were evaluated on a DSC by measuring the heat of fusion on heating and the heat of crystallization on cooling. Moisture regain, absorption speed, wickability, water retenti on value, and water-vapor permeability were measured. In the wear trials that the subjects performed a subsequent exercise protocol wearing three differently treated socks in a conditioned environment ($14\pm2^{\circ}C$, 65$\pm$2% R.H.), microclimate temperature and humidity, and subjective wear sensations including thermal sensation, wettedness, softness, fit, and overall comfort were obtained. PEC-treated specimens with more than 20% add-on showed thermal storage on heating and thermal release on cooling by a DSC and the heat contents of treated ones were generally proportional to the add-ons. Moisture transport properties were highly improved after PEG treatment and increased rapidly with increasing add-on. The tendencies were, however, relaxed above 50% add-on and the treated knits were much stiffer above that add-on. In the wear trials of untreated, PEG add-on 20%, and 50% acrylic socks, the changes of microclimate temperature of 50% socks were significantly less than that of 20% socks. PEG add-on 50% socks showed significantly less changes of microclimate humidity than other two kinds of socks. Three kinds of socks showed significant differences in overall comfort and add-on 50% socks were accepted more comfortable than other two kinds of socks. Comfort zone of foot was extended after PEG treatment on socks and it implied that the subjects wearing PEG- treated socks felt comfortable in wider ranges of microclimate temperature and humidity.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1868-1873
• /
• 2006

A novel microorganism that could degrade high molecular weight gellan was screened and isolated from soil. On gellan plate, the microorganism grew well and completely liquefied the plate. The gellan-degrading microorganism was isolated by pure culture on glucose and nutrient agar medium afterwards. The 16S rDNA sequence analysis and biochemical tests using an API 50CHB/20E kit revealed that the strain belonged to Bacillus sp. The isolate, named as Bacillus sp. YJ-1, showed optimum gellan-degrading activity in 0.5% gellan medium at pH 7.5 and 37$^{\circ}C$. The activity was measured and evaluated by the thiobarbituric acid and thin-layer chromatography method. Mass spectrometry revealed that the major gellan.. depolymerized product was an unsaturated tetrasaccharide consisting of $\Delta$4,5-glucuronic acid-(1$\rightarrow$4 )-$\beta$-D-glucose-(1$\rightarrow$4)- $\alpha$-L-rhamnose-(1$\rightarrow$3)-$\beta$-D-glucose, which is a dehydrated repeating unit of gellan, thus the enzyme was identified as gellan lyase. When the gellan was present in the medium, the gellan-degrading activity was much higher than that in glucose-grown cells. These results indicate that in the presence of gellan, Bacillus sp. YJ-1 is able to metabolize the gellan by inducing gellan-degrading enzymes that can degrade gellan into small molecular weight oligosaccharides, and then the gellan. depolymerized products are taken up by the cells and utilized by intracellular enzymes.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.4
• /
• pp.412-420
• /
• 2011

Secretion of cellobiase occurred in a brefeldin A (BFA) uninhibited manner in the filamentous fungus Termitomyces clypeatus. Fluorescence confocal microscopy revealed that application of the drug at a concentration of 50 ${\mu}g$/ml caused arrest of Spitzenkorper assembly at the hyphal tip. This resulted in greater than 30% inhibition of total protein secretion in the culture medium. However, the cellobiase titer increased by 17%, and an additional 13% was localized in the vacuolar fraction en route secretion. The secretory vacuoles formed in the presence of the drug were also found to be bigger (68 nm) than those in the control cultures (40 nm). The enzyme secreted in the presence and absence of BFA revealed a single activity band in both cases in native PAGE and had similar molecular masses (approx. 120 kDa) in SDS-PAGE. The BFA enzyme retained 72% of native glycosylation. It also exhibited a higher stability and retained 98% activity at $50^{\circ}C$, 93.3% activity at pH 9, 63.64% activity in the presence of 1M guanidium hydrochloride, and 50% activity at a glucose concentration of 10 mg/ml in comparison to 68% activity, 75% activity, 36% activity, and 19% activity for the control enzyme, respectively. The observations collectively aimed at the operation of an alternative secretory pathway, distinct from the target of brefeldin A, which bypassed the Golgi apparatus, but still was able to deliver the cargo to the vacuoles for secretion. This can be utilized in selectively enhancing the yield and stability of glycosidases for a successful industrial recipe.

• Microbiology and Biotechnology Letters
• /
• v.46 no.1
• /
• pp.51-58
• /
• 2018

The expression, purification, and characterization of cold-adapted lipase from the psychrophile, Janthinobacterium sp. were investigated. The gene encoding lipase from Janthinobacterium sp. PAMC 25641 was cloned into a pET28a(+) vector and heterologously expressed in Escherichia coli BL21 (DE3). The amino acid sequence deduced from the nucleotide sequence (930 bp) corresponded to a protein having 309 amino acid residues with a molecular weight of 32.7 kDa and a pI of 5.55. Recombinant E. coli harboring the Janthinobacterium lipase gene were induced by addition of isopropyl-${\beta}$-D-thiogalactopyranoside. $Ni^{2+}$-NTA affinity chromatography was used to purify the lipase, which had a specific activity of 107.9 U/mg protein. The effect of temperature and pH on the activity of lipase was measured using p-nitrophenyl octanoate as a substrate. The stability of the lipase at low temperatures indicated it is a cold-adapted enzyme. The lipase activity was increased by $Na^{2+}$, $Mg^{2+}$, and $Mn^{2+}$, and decreased by $Zn^{2+}$ and $Co^{2+}$. Analysis of the lipase activity using various p-nitrophenyl esters showed a strong preference toward short acyl chains of the esters, indicating the ability of the cold-adapted lipase to hydrolyze short-chain esters.

• Journal of Powder Materials
• /
• v.23 no.5
• /
• pp.397-401
• /
• 2016

A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at $7.0g/cm^3$ and then sintered in $H_2-N_2$ at $1120^{\circ}C$. The P around the macropores and large grains reduces due to the formation of $SiO_2$ as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.

• Journal of Environmental Impact Assessment
• /
• v.12 no.4
• /
• pp.281-290
• /
• 2003

The influence of land-use type on surrounding temperature was studied the relationships between land-use types and the air condition analyzing AWS (Automatic Weather Station) data of Seoul from KMA (Korea Meteorological Administration). The distribution of air temperature by land-use type has been influenced by the different heating and cooling rates. The difference of heating rates depending on the land-use type was largest at 2~3hours after sunrise and the difference of cooling rates was largest from 2hours before sunset to 2hours after sunset with its maximum at sunset. The difference of cooling rates is greatest in a clear and calm weather situation and the large difference in cooling rates between the green areas and built-up area is up to $1.5^{\circ}C/h$. By season, the difference of cooling rates is largest in fall and in turn spring, winter and summer. In a cloudy or rainy day, the difference in heating and cooling rates on land-use type is not distinct but the tendency is similar to a clear day. In all seasons, the rate of difference occurrence of the daily range of temperature between the green areas and built-up area was large, especially fall. In a fall with a clear and calm day, the magnitude of the daily range of temperature between the green areas and built-up area was largest.