• 한국재료학회지
• /
• 제10권2호
• /
• pp.144-147
• /
• 2000

10%C-5%Mo-5%W-10%Cr 및 10%C-5%Mo-5%W-10%V 백주철의 응고거동을 열분석을 통하여 연구하였다. 15Kg 용량의 고주파 유도옹해로에 선철, 고철, Fe-Mo, Fe-W, Fe-Cr, Fe-V 등을 장입시켜 용해시킨 후 슬래그를 제거시키고 $1550^{\circ}C$에서 Y블럭의 펩 주형에 주입하였다. 응고거동을 조사하기 위하여 50g을 Y블럭에서 채취한 뒤 알루미나 도가니에 넣어 재용해시킨 후 1$0^{\circ}C$/min의 냉각속도로 냉각시키면서 여섯 종류의 다른 온도에서 도중에 급냉시켜 응고조직을 광학현미경으로 관찰하였다. 10%C-5%Mo-5%W-10%Cr 백주철의 경우 초정 오스테나이트, 오스테나이트와 M(sub)7C(sob)3의 공정, 오스테나이트와 M(sub)6C의 공정으로, 10%C-5%Mo-5%W-10%V 백주철의 경우 초정 MC, 오스테나이트와 MC의 공정, 오스테나이트와 M(sub)2C의 공정으로 각각 순차적으로 정출하였다. 정출하였다.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.365-374
• /
• 2010

농산폐기물인 폐버섯배지의 목재 펠릿 연료화 가능성을 탐색하기 위하여 국내 발생량이 가장 많은 새송이버섯, 팽이버섯, 느타리버섯 폐배지를 대상으로 산(acid) 첨가 용매추출에 의한 회분감소 실험을 수행하였고 이에 따른 연료특성 변화를 탐색하였다. 새송이버섯 폐배지는 초산 2%(w/w), 무수구연산 1%(w/w) 첨가군, 액비 1:8, 추출온도 $55^{\circ}C$, 추출시간 180분의 추출조건에서 무처리군의 회분함유량 8.81%(w/w), 발열량 3,958.3 kcal/kg 대비 각각 3.33%(w/w), 4,219.2 kcal/kg로 성능을 극대화시킬 수 있었으며, 팽이버섯 폐배지는 초산 3%(w/w), 무수구연산 1%(w/w) 첨가군, 액비 1:8, 추출온도 $65^{\circ}C$, 추출시간 180분의 추출조건에서 무처리군의 회분함유량 14.91%(w/w), 발열량 4,190.3 kcal/kg 대비 각각 4.07%(w/w), 4,627.6 kcal/kg로 성능이 극대화되었으며, 느타리버섯 폐배지는 초산 1%(w/w), 무수구연산 1%(w/w) 첨가군, 액비 1:7, 추출온도 $65^{\circ}C$, 추출시간 180분의 추출조건에서 무처리군 대비 회분함유량이 3.31%(w/w)에서 0.59%(w/w)로 감소효과가 극대화되었고 발열량은 4,558.6 kcal/kg 대비 4,216.2 kcal/kg로 감소효과가 최소화됨으로써 성능이 극대화되었다.

• Fisheries and Aquatic Sciences
• /
• 제15권1호
• /
• pp.69-72
• /
• 2012

Effects of dietary nutrient content on the biological index and serum chemistry of olive flounder Paralichthys olivaceus achieving compensatory growth were investigated. Six treatments were prepared in triplicate. Fish were hand-fed with the control (C) diet twice daily for 8 weeks (8W-C) or fish were starved for 2 weeks and then hand-fed with the C, high protein (HP), high carbohydrate (HC), high lipid (HL), or intermediate protein, carbohydrate and lipid (IPCL) diets for 6 weeks, referred to as 6W-C, 6W-HP, 6W-HC, 6W-HL, and 6W-IPCL, respectively. Weight gain of fish in the 8W-C, 6W-HP, and 6W-IPCL treatments was higher than that of fish in the 6W-C treatment. Condition factor (CF) of the fish in the 6W-HP, 6W-HC and 6W-IPCL treatments was higher than that of fish in the 8W-C and 6W-C treatments. The hepatosomatic index (HSI) of fish in the 6W-HC, 6W-HL and 6W-IPCL treatments was higher than that of the fish in the 8W-C, 6W-C and 6W-HP treatments. Serum chemistry except triiodothyronine ($T_3$) was not significantly different among the treatments. In conclusion, CF and HSI of the fish could be indices reflecting compensatory growth, whereas $T_3$ seemed to play a partial role in achieving compensatory growth.

• 한국정보전자통신기술학회논문지
• /
• 제12권5호
• /
• pp.499-506
• /
• 2019

본 논문은 SiC Hybrid module를 적용한 7kW 인버터의 동작 안정성에 관한 것으로 손실 방정식과 시뮬레이션 결과를 비교하여 시뮬레이션 결과의 유효성을 검증하였으며, 시뮬레이션을 통해 Si module과 SiC Hybrid module의 스위치 손실과 다이오드 손실을 비교하였다. 손실 방정식 계산을 통하여 SiC Hybrid module의 도통 손실은 168W, 스위칭 손실은 9.3W, 다이오드 손실은 10.5nW의 결과를 나타내었으며, 시뮬레이션 결과와 비교하였을 때 유사한 값을 나타내었다. 이를 바탕으로 Si module과 SiC Hybrid module의 시뮬레이션 결과 값 비교 결과, Si module의 총 소자 손실값은 246.2W, SiC Hybrid module의 총 소자 손실 값은 189.9W를 나타내었으며, 손실 차이 값은 56.3W로써 약 0.8W의 효율 차이를 보였다. 이로 인하여 SiC SBD의 Reverse recovery 특성을 검증하였다. 또한 고온 포화상태에서 SiC Hybrid module 및 Si module의 안정성을 확인하기 위하여 온도 포화 테스트를 진행하였으며, Si module의 경우, 출력전력 4kW에서 동작을 멈추었고, SiC Hybrid module은 7kW까지 동작을 확인하였다. 이를 바탕으로, 효율 그래프와 온도 그래프를 제시하였으며, Si module은 4kW까지, SiC Hybrid module은 7kW까지 그래프로 나타내었다.

• KSBB Journal
• /
• 제9권4호
• /
• pp.436-442
• /
• 1994

Aspergillus terreus NRRL 1960에 의한 이다콘산의 생산에 관해 연구하였다. pH, 접종량, 배지조성 등의 최적조건을 확립하였다. 이타콘산의 최대생산 량은 37°C, pH 2.5의 조건에셔, 5% (w/v) glu­c cose, 0.5 % (w/v) $NH_4Cl$, 0.2 % (w/v) yeast ex­tract, 0.1 % (w/v) $MgSO_4$, 0.2 % (w/v) NaCI을 포함하는 배지에서 7일만에 $19.18g/\ell$를 얻을 수 있었다. 종균배양 배지로서 2 % malt extract가 적합하였다. 교반식 반응기에서 유리균체에 의한 이타콘 산의 회분식 생산은 플라스크 배양에 비해 비효율적 이었다.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.25-30
• /
• 1994

W-Ti-C-N based multiphase hard materials have been prepared from WC/TiN powder mixture. By sintering at and above 190$0^{\circ}C$, the two phases of powder mixture has transformed into intermixed W, W2C and Ti(C, N) phases. For the temperature range between 180$0^{\circ}C$ and 210$0^{\circ}C$, the sintered or hot pressed samples show maximum density and hardness. The seems that metallic W grains enhance the fracture toughness of materials. The wear resistance of the material is found to increase with increasing hardness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.525-526
• /
• 2009

본 논문에서는 Sporosarcina pasteurii라는 미생물의 생체광물형성작용을 이용하여 Calcite($CaCO_3$) 석출을 유도하고, 이를 Mortar에 적용하여 요구 성능 향상을 평가하였다. Sporosarcina pasteurii를 혼입(input)한 Mortar 시험체(C3S-S.p)와 일반 Mortar 시험체(C3S-W)의 중성화 반응을 실험을 통해 비교한 결과 C3S-S.p가 C3S-W에 비해 중성화가 지연되는 것을 육안으로 확인할 수 있었다. 또한 28日간 Urea-CaCl2 수용액(Medium)에서 양생한 C3S-S.p와 C3S-W의 내구성을 실험을 통해 비교한 결과 Sporosarcina pasteurii를 혼입한 Mortar 시험체(C3S-S.p)가 일반 Mortar 시험체(C3S-W) 비해 내구성이 향상된 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.561-571
• /
• 1999

Microstructure and mechanical properties of five Cr-Mo steels for nuclear industry applications have been investigated. Transmission electron microscopy, energy dispersive spectrometer, differential scanning calorimeter, hardness, tensile, and impact test were used to evaluate the Cr and W effect on the microstructure and mechanical properties. Microstructures of Cr-Mo steels after tempering are classified into three types : bainitic 2.25Cr-lMo steel, martensitic Mod.9Cr-lMo, HT9M, and HT9W steels, and dual phase HT9 steel. The majority of the precipitates were found to be M$_{23}$C$_{6}$ carbides. As minor phases, fine needle-like V(C,N), spherical NbC, fine needle-like Cr-rich Cr$_2$N, and Cr-rich M$_{7}$C$_3$were also found. Addition of 2wt.% W in Cr-Mo steels retarded the formation of subgrain and dissolution of Cr$_2$N precipitates. Hardness and ultimate tensile strength increased with increasing Cr content. Though Cr content of HT9W steel was lower than that of HT9 steel, the hardness of HT9W was higher due to the higher W content. W added HT9W steel had the highest ultimate tensile strength above $600^{\circ}C$. But impact toughness of W added steel (HT9W) and high Cr steel (HT9) was low.w.w.

• Fisheries and Aquatic Sciences
• /
• 제16권1호
• /
• pp.57-61
• /
• 2013

I hypothesized that the manipulation of dietary nutrient contents including phosphorous could affect compensatory growth of juvenile olive flounder, Paralichthys olivaceus. Thirty fish averaging 34.8 g per tank were randomly chosen and distributed into 15 flow-through 180-L tanks. Three experimental diets were prepared: the control (C) diet, high protein and lipid (HPL) diet, and HPL diet with supplementation of calcium phosphate-monobasic (HPLP). Five treatments were prepared in triplicate: fish were hand-fed daily with the C diet twice a day for 8 weeks (C-8W); fish were starved for 1 week, and then fed with the HPL or HPLP diets twice a day for 7 weeks, and referred to as HPL-7W and HPLP-7W, respectively; and fish were starved for 2 weeks, and then fed with the HPL or HPLP diets twice a day for 6 weeks, and referred to as HPL-6W and HPLP-6W, respectively. The body weight of fish with C-8W, HPL-7W and HPLP-7W treatments was higher than fish with HPL-6W and HPLP-6W treatments on week 2, 4 and 6 after an initiation of the trial. At the end of the 8-week trial, fish with HPLP-7W and HPL-7W treatments overcompensated, as compared to fish with C-8W treatment. Full compensation was not achieved in fish subjected to the 2-week feed deprivation (HPL-6W and HPLP-6W treatments). Overall feed intake by fish was proportional to weeks of feeding. Feed conversion ratio of fish with HPLP-7W, HPL-6W and HPLP-6W treatments was higher than fish with C-8W treatment. The study showed that dietary supplementation of protein and lipid resulted in overcompensation of juvenile olive flounder subjected to a 1-week feed deprivation, but not a 2-week feed deprivation. Additionally, dietary supplementation of phosphorous did not further improve compensatory growth of fish.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.85-88
• /
• 2005

[ $W-15wt.\%$ ] Cu nanocomposite powders are fabricated by ball-milling and subsequent hydrogen-reduction. The compacted parts of $W-15wt.\%Cu$ nanocomposite powders were sintered at $1200^{\circ}C$ for 1 h with various heating rates of 5 and $20^{\circ}C/min$. The homogeneity of the sintered microstructures was evaluated through homogeneity index by the standard deviation of Victor's hardness test. The W-W contiguities were calculated by using Voronoi diagrams. The sintered microstructure with the heating rate of $20^{\circ}C/min$ was more homogeneous and had lower W-W contiguity than that of $5^{\circ}C/min$. The microstructural homogeneity was directly related to the W-W contiguity. Thermal conductivity of the sintered parts with the heating rate of $20^{\circ}C/min$ was higher than that with heating rate of $5^{\circ}C/min$. This phenomenon indicates that the thermal conductivity is affected by the W-W contiguity resulting from the homogeneity of the sintered microstructure.