• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.247-253
• /
• 2008

In this paper, we describes the design and implementation of real-time management system for efficient operation via monitoring and control of MCC(Motor Control Center). The real-tine management system can be divided hardware(MCC panel) and software(management program). First, hardware is divided into load attaching motor and MCC components for working together control and data network. Second, software(management system) are consisted of communication interface, environment setting, data processing modules. The produced and implemented reduction model of MCC panel is pretested using m-PRO, iM-PRO devices, and HyperTerminal. For field test, MCC panel is tested by RS-232C/485, communication procedure in management system is certified by transmitting and receiving message using control command. By the experimental results, the implemented real-time management system can be used to operate MCC system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.891-896
• /
• 2011

In this study, experiments were carried out to investigate the convective heat transfer characteristics of rectangular microchannels. The sample used in the experiments contained 20 rectangular microchannels in parallel. The channels had a hydraulic diameter of 700 ${\mu}m$. Distilled water was used as the working fluid. In the experiments, the Reynolds number ranged from 400 to 800, heat flux ranged from 35 to 85 kW/$m^2$, and the inlet fluid temperature was $20^{\circ}C$. As a result, the convective heat transfer coefficient increased upon increasing the Reynolds number and ranged from 4.6 to 6.4 kW/$m^2/^{\circ}C$ in the thermally fully developed region. Moreover, the higher the Reynolds number, the longer the thermal entry length in the rectangular microchannels. However, it was observed that a variable heat flux did not affect the thermal entry length. In conclusion, a correlation was proposed to indicate the heat transfer characteristics in a thermally fully developed region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.96-100
• /
• 2006

A pulsed laser ablation deposition (PLAD) technique is an excellent method for the fabrication of amorphous carbon (a-C) films. This paper was focused on the understanding and analysis of the motion of carbon atom (C) and carbon ion ($C^+$) particles in laser ablation assisted by Ar plasmas. The simulation has carried out under the pressure P=10~100 mTorr of Ar plasmas. Two-dimensional hybrid model consisting of fluid and Monte-Carlo models was developed and three kinds of the ablated particles which are C, $C^+$ and electron were considered in the calculation of particle method. The motions of energetic $C^+$ and C deposited upon the substrate were investigated and compared.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.519-525
• /
• 1998

The critical micelle concentration $(CMC^{\ast})$ and the counterion binding constant (B) in a micellar state of the mixed surfactant systems of dodecylpyridinium chloride (DPC) with dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyldimethylethylammonium bromide (CDEAB) were determined at $25^{\circ}C$ as a function of ${\alpha}_1$ (the overall molc fraction of DPC) by the use of electric conductivity method. Various thermodynamic parameters $(X_{i},\;{\gamma}_{I},\;C_{i},\;a^{M}_{i}, \beta,\;{\Delta}H_{mix}, \;and\; {\Delta}G^{o}_{m})$ for the micellization of DPC/DTAB, DPC/TTAB, and DPC/CDEAB mixtures were calculated and analyzed for each system by means of the equations derived from the pseudophase separation model. The results show that the DPC/DTAB mixed system has the greatest deviation and the DPC/CDEAB mixed system has the smallest deviation from the ideal mixed micellar model.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1751-1757
• /
• 2007

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli $DH5{\alpha}$ at $37^{\circ}C$ for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at $20^{\circ}C$ in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature ($T_t$) of levansucrase-ELP[V-40] was $17^{\circ}C$ with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2171-2180
• /
• 1997

In this paper, we proposed a MAC protocol called P/S-DCA that using dynamci channel allocation scheme for supports the multimedia traffic in wireless ATM, and analysis theoretically the throughput and delay of up/down link according to varying the down traffic load. To evaluate and the dynamic channel allocation scheme, simulations are executed with varying down traffic load. The results are proved that system capacity is improved better than PRMA and C-PRAM. The system capacity, denoting by $M_{0.01}$, is defined as the maximum number of conversations which can be supported under constraint of packet dropping probability no more than 1%. It is shown that the values of $M_{0.01}$ for ${\lambda}_{d}=0.5,\;{\lambda}_{d}=0.2\;{\lambda}_{d}=0.1\;{\lambda}_{d}=0.001$ are about 43, 69, 77 and 83, respectively. This indicates that P/S-DCA protocol achieves a significant improvement in system capacity relative to PRMA and C-PRMA protocol.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.1 no.1
• /
• pp.23-35
• /
• 1983

In its global meaning language translation refers to the process whereby a program which is executable in one computer can be executed in another computer directly to obtain the same result. There are four different ways of approaching translation. The first way is translation by a Translator or a Compier, the second way is Interpretation, the third way is Simulation, the last way is Emulation. This paper introduces the M-C Translator which was designed as the first way of translation. The MUSS 80 language (the subsystem of the UNIVAC Solid State 80 S-4 assembly language system) was chosen as the source language which includes forty-three instructions, using the CYBER COMPASS as the object language. The M-C translator is a two pass translator and is a two pas translator and es written in Fortran Extended language. For this M-C Translation, seven COMPASS subroutines and a set of thirty-five macros were prepared. Each executable source instruction corresponds to a macro, so it will be a macro instruction within the object profram. Subroutines are used to retain and handle the source data representation the same way in the object program as in the source system, and are used to convert the decimal source data into the equivalent binary result into the equivalent USS-80digits before and after arithmetic operations. The source instructions can be classified into three categories. First, therd are some instructions which are meaningless in the object system and are therefore unnecessary to translate, and the remaining instructions should be translated. Second, There are some instructions are required to indicate dual address portions. Third, there are Three instructions which have overflow conditions, which are lacking in the remaining instructions. The construction and functions of the M-C Translator, are explained including some of the subroutines, and macros. The problems, difficulties and the method of solving them, and easier features on this translation are analysed. The study of how to save memory and time will be continued.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2135-2137
• /
• 2005

This paper describes the features of electric and magnetic fields produced by lightning discharges. The measuring system consists of fast electric field sensor, crossed-loop magnetic field sensors, signal processing circuit, A/D converter and data acquisition equipment with a 12bit resolution and 10[MS/s] sampling rate. The frequency bandwidth and responsitivity of the electric field measuring system were 40[Hz]${\sim}$2.6 [MHz] and 2.08 (V/m/mV) and those of the magnetic field measuring system were 400[Hz]${\sim}$1[MHz] and 2.78[nT/mV], respectively. The electric and magnetic fields produced by lightning discharges were observed, and the features and parameters of the waveforms were analyzed.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.56.3-56.3
• /
• 2018

We proceed to develop the control software of GMACS, which is a wide-field, multi-object, moderate-resolution optical spectrograph for the Giant Magellan Telescope (GMT). Flexure Compensation System (FCS) prototype is one of the electronics and mechanical prototypes for GMACS. In this poster, we present the software design for the FCS prototype by using the software system modeling language, SysML. We also show two development tools to control the prototype that communicates via EtherCAT: using TwinCAT and Visual C++ on Windows 10, and GMT Software Development Kit (SDK) and C++ on Linux. We discuss the way to design the GMACS control software, which would not depend on the development tools.

• Science of Emotion and Sensibility
• /
• v.18 no.1
• /
• pp.49-58
• /
• 2015

This paper investigated far-infrared emission characteristics of ZrC imbedded heat storage knitted fabrics for emotional garment. For this purpose, ZrC imbedded heat storage PET was spun with high viscosity PET imbedded ZrC powder on the core part and low viscosity PET on the sheath part by conjugated spinning method. Ingredient analysis and far-infrared emission characteristics assessment of spun filament were carried out by EDS and FT-IR spectrometer. Two kinds of knitted fabrics were made using texturized ZrC imbedded PET for measuring thermal characteristics of ZrC imbedded heat storage PET. Zr peak was certified by EDS measurement and it was confirmed that content of Zr was 19.29%. Far-infrared analysis revealed that emission power at the range of wavelength, $5{\sim}20{\mu}m$ was $3.65{\times}10^2W/m^2$, and emissivity was 0.906. Heat storage analysis by KES-F7 system revealed that $Q_{max}$ of ZrC imbedded PET knitted fabric was lower than that of regular PET one and warmth keepability rate was higher than that of regular one, which means that ZrC imbedded PET knitted fabric has heat storage property. Thermal conductivity of ZrC imbedded PET knitted fabric was higher than that of regular PET one which was caused by high thermal conductivity of Zr itself. Hand property of ZrC imbedded knitted fabric was not inferior compared to regular PET knitted fabric, which preferably was found to be dependent on knit structure and surface property.