• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.876-883
• /
• 2007

• Annual Conference of KIPS
• /
• 2007.11a
• /
• pp.837-840
• /
• 2007

사회가 고령화, 초핵가족화 및 재난취약계층이 늘어나면서 요구호자에 대한 고품질 맞춤형서비스가 필요하게 되었다. 본 논문에서는 소방방재청의 24*365 긴급대응서비스에 IT첨단기술, 바이오 의료기술을 접목하여 언제 어디서나 고품격 맞춤형 서비스를 제공할 수 있는 U-119시스템 개념, 구축사례 및 발전방향에 대해 제시하고자 한다.

• 연구논문집
• /
• s.24
• /
• pp.129-140
• /
• 1994

Design and implementation of monitoring and control system using dual-microprocessor node is presented for real time process. The proposed system is implemented with 2 of the single chip microprocessors in tightly coupled mode and results in speed up of $s_p=1.74.$ Under the assumption that the nodes are interconnected in multidrop. the overall system performance such as average throughout-delay characteristics and effective throughput are analyzed using M/G/1 gueueing model, and results show that the proposed node can be used to medium sized distributed monitoring and control system.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.55-72
• /
• 2010

Recently, the battlefield environment has changed from platform-centric warfare(PCW) which focuses on maneuvering forces into network-centric warfare(NCW) which is based on the connectivity of each asset through the warfare information system as information technology increases. In particular, C4I(Command, Control, Communication, Computer and Intelligence) system can be an important factor in achieving NCW. It is generally used to provide direction across distributed forces and status feedback from thoseforces. It can provide the important information, more quickly and in the correct format to the friendly units. And it can achieve the information superiority through SA(Situational Awareness). Most of the advanced countries have been developed and already applied these systems in military operations. Therefore, ROK forces also have been developing C4I systems such as KJCCS(Korea Joint Command Control System). And, ours are increasing the budgets in the establishment of warfare information systems. However, it is difficult to evaluate the C4I effectiveness properly by deficiency of methods. We need to develop a new combat effectiveness evaluation method that is suitable for NCW. Existing evaluation methods lay disproportionate emphasis on technical factors with leaving something to be desired in human factors. Therefore, it is necessary to consider technical and human factors to evaluate combat effectiveness. In this study, we proposed a new Combat Effectiveness evaluation algorithm called E-TechMan(A Combat Effectiveness Evaluation Algorithm Considering Technical and Human Factors in C4I System). This algorithm uses the rule of Newton's second law($F=(m{\Delta}{\upsilon})/{\Delta}t{\Rightarrow}\frac{V{\upsilon}I}{T}{\times}C$). Five factors considered in combat effectiveness evaluation are network power(M), movement velocity(v), information accuracy(I), command and control time(T) and collaboration level(C). Previous researches did not consider the value of the node and arc in evaluating the network power after the C4I system has been established. In addition, collaboration level which could be a major factor in combat effectiveness was not considered. E-TechMan algorithm is applied to JFOS-K(Joint Fire Operating System-Korea) system that can connect KJCCS of Korea armed forces with JADOCS(Joint Automated Deep Operations Coordination System) of U.S. armed forces and achieve sensor to shooter system in real time in JCS(Joint Chiefs of Staff) level. We compared the result of evaluation of Combat Effectiveness by E-TechMan with those by other algorithms(e.g., C2 Theory, Newton's second Law). We can evaluate combat effectiveness more effectively and substantially by E-TechMan algorithm. This study is meaningful because we improved the description level of reality in calculation of combat effectiveness in C4I system. Part 2 will describe the changes of war paradigm and the previous combat effectiveness evaluation methods such as C2 theory while Part 3 will explain E-TechMan algorithm specifically. Part 4 will present the application to JFOS-K and analyze the result with other algorithms. Part 5 is the conclusions provided in the final part.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.63-70
• /
• 2008

In this paper, a smart sensor system for the MEMS pressure sensor was developed. A compensation algorithm and programmable calibration circuits were presented to eliminate errors caused by temperature drift of piezoresistive pressure sensors in itself. This system consisted of signal conditioning, calibration, temperature detection, microprocessor, and communication parts and these were integrated into a SOC. A RS-232 interface was employed for monitoring and control of a smart sensor system. The area of fabricated IC is $4.38{\times}3.78\;mm^2$ and a $0.35{\mu}m$ high voltage CMOS process was used. Compensation error for temperature drift of 50 KPa pressure sensors was measured into ${\pm}0.48%$ in the range of $-40^{\circ}C{\sim}150^{\circ}C$. Total power consumption was 30.5 mW.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.70-78
• /
• 2023

Inclinometer has several problems of 1)difficulty installing inclinometer casing, 2) measuring 2D local lateral displacement of retaining wall, 3) measurement by manpower. To solve such problems, a 2D LiDAR sensor-based retaining wall displacement measurement system was developed in previous studies. The purpose of this study is to select a displacement analysis algorithm to be applied in the retaining wall displacement measurement system. As a result of the displacement analysis algorithm selection, the M3C2 (Multiple Model to Model Cloud Comparison) algorithm with a displacement estimation error of 2mm was selected as the displacement analysis algorithm. If the M3C2 algorithm is applied in the system and the reliability of the displacement analysis result is secured through several field experiments. Convenient management of the displacement for the retaining wall is possible in comparison with the current measurement management.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.11-16
• /
• 1999

In this study, Ultra-precision finishing system using micro abrasive film experimented using experimental variable film feed speed and grinding speed and structural steel(SM45C) with respect to 12~3{\mu}m$ micro abrasive film. the result are follows; (1) Experimental condition must setup dissimilar about each micro abrasive film. (2) To measurement deviation the smallest machined condition are 20mm/min in 12{\mu}m$, 5mm/min and 15mm/min in 9{\mu}m$ and 5{\mu}m$, 5mm/min in 3{\mu}m$ in film feed speed. (3) To measurement deviation the smallest machined condition are 180m/min in 12{\mu}m$, 84m/min in 9{\mu}m$, 56 and 84m/min in 5{\mu}m$, 104m/min in 3{\mu}m$ in grinding speed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.111-112
• /
• 2011

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.11
• /
• pp.1488-1493
• /
• 1995

In this study, the structural, electrical and dielectric properties were investigated in (P $b_{0.76}$ $Ca_{0.24}$)[( $Co_{1}$2/ $W_{1}$2/)$_{0.04}$ $Ti_{0.96}$) $O_{3}$ system ceramics which were manufactured with the addition of Mn $O_{2}$. According to the increment of Mn $O_{2}$ addition, tetragonality was decreased. The specimen added with 1.5 mol% Mn $O_{2}$ and sintered at 1150.deg. C showed the highest density of 7.06[g/c $m^{3}$]. The variations of grain xize as a function of Mn $O_{2}$ addition were negligibly small. But grain was grown until 7.88[.mu.m] with increasing sintering temperature. Electromechamical coupling factor planar mode $K_{p}$ was decreased to a small value of $K_{p}$ = 0 in all the specimens added with Mn $O_{2}$ and sintered at 1150.deg. C & 1200.deg. C.& 1200.deg. C.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.925-933
• /
• 2019

In this paper, we implement ZYNQ SoC-based post-processing system that utilizes partial reconfiguration to remove blocking artifacts generated by compression algorithm. Hardware implementation of the deblocking filter in a Field Programmable Gate Array (FPGA) provides high computational capability and can be partially reconfigured to process 1080p images in real time. Partially reconfigurable areas in FPGA can be utilized to use hardware more efficiently in highly resource-constrained embedded systems. Experimental results of the proposed system show improvement of visual quality both objectively and subjectively with 0.6dB higher PSNR after deblocking filtering process. The measured power consumption of the deblocking filter during run-time is 68.33mW.