• The Korean Journal of Food And Nutrition
• /
• v.17 no.2
• /
• pp.206-211
• /
• 2004

It is very important to minimize the acid value of oil in the oil and fat industry, because acid value of oil products are a indicator quality. This study was performed to investigate change of moisture content, acid value and free fatty acid content by drying condition such as drying method, temperature and drying time on steamed duck egg york. Also, change of fatty acid composition by acid value. The acid values, moisture contents and free fatty acid contents were showed comparatively lower value by spray drying and freeze drying than by steam drying. but difference that keep in mind between each drying method was not looked. Whereas moisture content, acid value and free fatty acid content of effect of drying temperature reaches in lowest value. also, did not show change until dry 12hours reaching to lowest value by 3.1, 3.0％ and 0.98％ after dry 9hours both moisture content, acid value and free fatty acid content. Also, acid value increase, free fatty acid was increased, where unsaturated fatty acid showed that decrease rapidly.

• Journal of the Korean Society for Railway
• /
• v.8 no.3
• /
• pp.222-227
• /
• 2005

This study investigates the change of the temperature and mechanical properties of the braking disk for the railway vehicle. The average temperature is measured about $100^{\circ}C$ and the maximum temperature is measured over $200^{\circ}C$ by non-contact sensor from Seoul to Chun-an. As a result of measuring, we determine the temperature of test(tensile and J-integral) at $20^{\circ}C,\;100^{\circ}C,\;200^{\circ}C$ and $300^{\circ}C$. In the test, the material values are decreased by the increasing of the temperature. But ratio of decreasing is the largest at $200^{\circ}C$, the tensile test value is decreased about $10\%$ and the J-integral test value is decreased $30\%$. The mechanical properties of this material are mostly changed at $200^{\circ}C$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.373-380
• /
• 1999

Consolidation settlements of soft clay are often large and potentially damaging to the structures. Currently, large-scale construction projects for airport and harbor etc. are in progress in Korea and many of these structures will be constructed on thick and soft clay layers. For this kind of ground condition, evaluation of consolidation settlement is required at every design and construction stages, and the magnitude of secondary compression appears to be larger than expected. Generally, the magnitude of secondary compression is evaluated by laboratory and in-situ consolidation tests or by empirical $C_{a/}$ $C_{c}$, relationship. The use of empirical value $C_{a/}$ $C_{c}$ may be economical, fast and powerful tool in estimating secondary consolidation settlement. However, the databases of the $C_{a/}$ $C_{c}$, for typical soft clays in Korea are insufficient. The purpose of this study is to investigate the relationship of $C_{a/}$ $C_{c}$ on marine clay near the southern sea in Korea. A series of incremental loading consolidation tests with measurement of pore water pressure were performed. It was found that the $C_{a/}$ $C_{c}$ of undisturbed marine clay is 0.0397. This value is similar to that proposed by Mesri and Castro(1987) on inorganic clay and silt. and silt. and silt.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.02a
• /
• pp.70-77
• /
• 1999

Consolidation settlements on soft clay are often large and potentially damaging to structures. Currently, large-scale projects are in progress in Korea. These structures will be constructed on both thick and soft clay layers, and so the accurate evaluation of magnitude of settlement is required at every step in design and construction. Especially, secondary compression play an important role in consolidation settlements on soft clay. Generally, the magnitudes of secondary compression are evaluated by laboratory and in-situ consolidation tests or by empirical $C_{a/}$ $C_{c}$ relationships. The empirical $C_{a/}$ $C_{c}$ may not be only economical, but a fast and powerful tool in estimating secondary consolidation settlement. However, databases of the $C_{a/}$ $C_{c}$ relationship for sites in Korea are currently insufficient. The purpose of this study is to investigate the relationship of $C_{a/}$ $C_{c}$, on marine clay near the southern sea in Korea. In this study a series of incremental loading consolidation tests (measuring base pore water pressure) are performed. It was found that the $C_{a/}$ $C_{c}$ on undisturbed marine clay equaled 0.0397. This value is similar to the value proposed by Mesri and Castro(1987) for inorganic clay and silt. and silt. and silt.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.2
• /
• pp.95-101
• /
• 2002

The propagation rate(da/dt) prediction parameter and the microstructure properties of creep crack in domestic 3.3NiCrMov steel were investigated at 550$\^{C}$ by using 0.5" CT specimen under constant load(4090N) and constant Ct(300∼4000N/mhr) condition that was maintained during crack growth of 1mm distance. C＊ usually increased with crack length though load was reduced in order to maintain constant Ct value as crack growth and considerably showed the scatter band, but Ct depended on load line displacement rate and represented a good relation with da/dt. At constant toad and Ct region, crack growth slope was 0.900 and 0.844 each, in the other hand C＊ slope was 0.480. Fully coalesced area(FCA) ahead of crack tip was increased as Ct value increase to the critical value, and after that value FCA decreased. The average diameter ditribution of cavity in FCA showed the greatest value about 1.5 ㎛ when Ct=2000N/mhr. The increasing of Ct in FCA view point enlarged the size of damage area and the size reached to maximum 800 ㎛ when Ct=2000N/mhr.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.398-403
• /
• 2005

This study investigates the change of the temperature and mechanical properties of the braking disk for the railway vehicle. The average temperature is measured about $100^{\circ}C$ and the maximum temperature is measured over $200^{\circ}C$ by non-contact sensor from Seoul to Chun-an. In the $20^{\circ}C-300^{\circ}C$, the 0.2% offset yield strengths of the disk (GC25-30 material) are a little down to the reference value, but the linear relation of tensile test result is not find from the linear change of temperature. However, JIC values have the inverse proportion to the temperature, and the JIC value at $200^{\circ}C$ decrease 30.55% from the JIC. value of the room temperature. This result means that the crack length on the braking disk is rapidly increase at $200^{\circ}C$.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.154-160
• /
• 2000

Martensitic stainless steels containing 12%Cr are commonly used in quenched and tempered conditions. The quenching heat treatment involves annealing to obtain austenite and to dissolve the carbides , followed by cooling to transform the austenite into martensite and often to cause carbide predipitation. In this study, we used three different tempered specimens which were temperated at 30$0^{\circ}C$, 67$0^{\circ}C$ and 75$0^{\circ}C$ . The crack propagation and fracture toughness tests were performed on this three different specimens. The experimental results showed that the highest value of crack growth rate and the lowest value of fracture toughness were observed in the specimen which were temperated at $600^{\circ}C$, however, when the specimen were temperated at 75$0^{\circ}C$, the vale of crack growth rate was significantly decreased and the value of fracture toughness was significantly increased as compared to which were temperated at $600^{\circ}C$.

• Korean Management Science Review
• /
• v.32 no.4
• /
• pp.135-153
• /
• 2015

In this paper, we intend to understand distinguishable SNS technology contributions for B2C commerce. In order to theorize this, we draw upon Technology-to-Performance chain (TPC) theory to develop the model that could explain how the technology value of the SNS could be realizable. For the purpose of capturing SNS technology effect to B2C channel effectiveness, on the basis of TPC theory, personal productivity is selected as a performance variable instead of satisfaction from SNS usage. Accordingly, as the antecedents of personal productivity, two variables of locatability and timeliness are extracted to reflect Task-technology-fit (TTF) dimension of performance precursors. For the utilization dimension of TPC framework, convenience and recreation tendency of the personal traits in shopping are included as the precursors of SNS utilization in the sense of reflecting utilitarian and hedonic value of SNS adoption. Empirical validation is conducted with reference to promotion and sales event on Facebook, which is chosen as the typical SNS based B2C commerce scenario. The data analysis result provide useful insights to further investigate the firm's SNS usage potentials for business applications.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.259-266
• /
• 2010

Clostridium difficile-associated disease (CDAD) is an important nosocomial infectious diarrhea and is associated with antibiotic use. Recently, incidence of C. difficile has been increasing in hospitals. A total of 1,329 stool specimens were examined from January, 2005 to December, 2008. This study analyzed the incidence and clinical characteristics of C. difficile infections on them. Out of 1,329 stool specimens, 283 specimens showed toxin A/B positive, using EIA. The positive rate was 21.2%; with the highest incidence among and above the 70years old. On endoscopy, psedo membranous colitis was found in 57.7%, and 19.5% of patients were normal. Pathologic finding showed PMC in 26.8% of patients, AAC in 52.2%. C. difficile was associated with PMC, however, endoscopic and pathologic findings tests showed normal to PMC.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.8-18
• /
• 1994

In one bath dyeing system of silk/cellulose acetate fiber blend fabric with acid /disperse dyes, adsorption behavior of acid dyes and disperse dyes on silk and cellulose acetate fabrics were examined. In the dyeing of cellulose acetate with C. I. Disperse Red 19(Red 19) and C. I. Disperse Red 60(Red 60) at 8$0^{\circ}C$ and 10$0^{\circ}C$, dye uptake with Red 19 was higher than that with Red 60. When the silk/cellulose acetate dyed with Red 19 and Red 60 at 10$0^{\circ}C$, dye uptake on cellulose acetate was influenced by affinity of the dye to the silk fabric dyed together. When the silk/cellulose acetate dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$, color of cellulose acetate dyed with Red 19 and Red 60 was not influenced by Blue 80 but silk dyed with Blue 80 was influenced by Red 19 and Red 60. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.