• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.11
• /
• pp.1093-1099
• /
• 2007

A compressive split Hopkinson pressure bar (SHPB) technique is used to investigate the dynamic behavior of SM45C at high temperature. A radiant heater, which consists of one ellipsoidal reflector and one halogen lamp, is used to heat the specimen. Specimens are tested from $600^{\circ}C$ to $1000^{\circ}C$ at intervals of $100^{\circ}C$ at a strain-rate ranging from 1100/s to 1150/s. A critical phenomenon occurs between $700^{\circ}C$ and $750^{\circ}C$ in SM45C. This phenomenon results in the drastic drop in a flow stress. In a modified Johnson-Cook constitutive equation, a reducer function is used to take into account for the effect of the drastic drop in a flow stress. A reducer function, which is dependant on the temperature as well as the strain, is introduced and the parameters of the modified Johnson-Cook constitutive equation are determined from test results.

• Korean Journal of Microbiology
• /
• v.36 no.1
• /
• pp.58-63
• /
• 2000

A bacterial isolate capable of degrading benzoate was selected from wastewater of Yocheon industrial complex and examined its biochemical characteristics and fatty acid composition. The isolate was identified as Klebsiella oxytoca strain C302. The strain C3O2 degraded catechol, protocatechuate, and 4-hydroxybenzoate as well as benzoate. The strain grew on and degraded 0.5 to 1.0 mM catechol most actively in MM2 medium at pH 7.0 and $30^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.225-237
• /
• 1996

The cultural characteristics of fruit bodies formation in the two selected strains(brown and yellow strain) of winter mushroom collected in Korea were investigated. The effects of various environmental conditions and physicochemical pretreatments were evaluated by the character of fruit bodies. There was no differences between two strains in non-selectivity of media, optimum temperature($11^{\circ}C{\sim}15^{\circ}C$), relative humidity(90%), and illumination(60 lux). In the application of alternated temperature (the best condition : $5^{\circ}C{\cdot}10^{\circ}C$ and $5^{\circ}C{\cdot}15^{\circ}C$), ultraviolet ray(30~50 seconds), electricity(5 seconds), thiamine hydrochloride(0.05~0.1%), urea, and IAA as a pretreatments, there was no differences between two strains. The brown strain had larger pileus and longer stipes than these of the yellow strain, while the yellow strain yielded more weight and number of the fruit body formation than the brown strain.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.2
• /
• pp.108-114
• /
• 1993

A new strain of acidophilic, acetogenic bacterium, Acetobacter sp. strain HA was isolated by selective enrichment from the traditionally fermented rice wine vinegar in Korea. It was a gram-negative, non-motile short rod and oxidized acetate and lactate. The optimal temperature and pH for growth were $28^{\circ}C$ and 4.0, respectively. The strain HA differed from other Acetobacter species by growing well on methanol, xylitol, inositol, dulcitol, D-xylose, L-arabinose, and D-mannose as sole sources of carbon and energy. The isolated strain HA did not produce $\gamma$-pyrones from glucose and did not produce ketone bodies from glycerol. The quinone system used in this study was an ubiquinone-9 isoprene unit. The guanine-plus-cytosine content of the DNA was 50.7 mol%, and the major cellular fatty acids were $C_{18:1} and C_{16:0}$.

• Microbiology and Biotechnology Letters
• /
• v.24 no.4
• /
• pp.465-471
• /
• 1996

A strain producing $\alpha$-1, 3-glucanase was isolated from soil samples. The strain has a grey aerial mycelium and showed brown color from the other side. The temperature and pH range for growth were from 10$\circ$C to 42$\circ$C and from 4 to 10, respectively. Arabinose, dextrin and mannose were utilized for growth. Analysis of cell wall components revealed that the strain was classified as type I. From the results, the strain was identified as Streptomyces sp. By using this strain, the maximum production of 0.65 units/ml for $\alpha$-1, 3-glucanase was achieved at 37$\circ$C for 48 hrs.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1596-1598
• /
• 2002

This paper presents the characteristics of Ta-N thin-film strain gauges as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-($4{\sim}16%$)$N_2$). These films were annealed for 1 hour in $2{\times}10^{-6}$ Torr vacuum furnace range $500{\sim}1000^{\circ}C$. The optimized conditions of Ta-N thin-film strain gauges were annealing condition($900^{\circ}C$, 1 hr.) in 8% $N_2$ gas flow ratio deposition atmosphere. Under optimum conditions, the Ta-N thin-films for strain gauges is obtained a high resistivity, ${\rho}$=768.93 ${\mu}{\Omega}cm$, a low temperature coefficient of resistance, TCR = -84 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal gauge factor, GF = 4.12.

• The Korean Journal of Mycology
• /
• v.1 no.1
• /
• pp.23-28
• /
• 1973

The soil of Kwangneung area(Kyeunggi-Do) was inoculated directly into wheat-bran-media and after $3{\sim}4$ days of incubation, a Penicillium species whose cellulase activity was 1011u/g was isolated. With the treatment of mutagenic agents an improved strain(cellulase activity: 1303u/g) was obtained. This strain was screened again by mono-spore isolation method. Finally a strain C8-14 (cellulase activity: 2351u/g) which had lesser spores than the wild strain was obtained.

• Mycobiology
• /
• v.47 no.2
• /
• pp.173-179
• /
• 2019

Cladophialophora is characterized by simple hyphomycetes with brown hyphae that give rise to branched chains of pale brown conidia and shows affinities with the Herpotrichiellaceae. A fungal strain belonging to the genus Cladophialophora was isolated from soil in Daegu, Korea. This strain produces numerous greenish to dark black lanose aerial mycelia with hair like structures. It is morphological similar to C. chaetospira, C. inabaensis, and C. multiseptata; however, the conidiophores and conidia sizes of the newly isolated strain (KNU16-032) are clearly different from them. The novelty of the strain was also confirmed based on phylogenetic analysis using the data sets of the internal transcribed spacer region of and the partial sequence of 28S ribosomal DNA region along with the cultural characteristics. Because morphological observations and phylogenetic analysis indicated that the strain is distinct from previously known Cladophialophora species, we propose this species as a new species Cladophialophora lanosa sp. nov., and provide the detailed descriptions in this study.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.148-151
• /
• 2005

This paper is concerned with the thermo-mechanical behavior and temperature dependent strain rate sensitivity of steel sheet for an auto-body. In order to Identify the temperature dependent strain rate sensitivity of SPRC35R and SPRC45E, uniaxial tension tests are performed with the variation of the strain rates from 0.001/sec to 200/sec, and the variation of environmental temperatures from $-40^{\circ}C\;to\;200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained with the static tensile test and at the intermediate strain rate is from the high speed tensile test. The experimental results show that the strain rate sensitivity increases at low temperature and it decreases at high temperature. It means that as the strain rate getting increasing, the variation of flow stress is more sensitive on the temperature. The results also indicates that the material properties of SPRC35R is more depend on the changes of strain rates and temperature than those of SPRC45E.

• Transactions of Materials Processing
• /
• v.15 no.2 s.83
• /
• pp.132-137
• /
• 2006

This paper is concerned with the thermo-mechanical behavior including temperature dependent strain-rate sensitivity of steel sheet for an auto-body. In order to identify the temperature dependent strain-rate sensitivity of SPRC35R and SPRC45E, uniaxial tension tests are performed with the variation of the strain-rates from 0.001 /sec to 200 /sec at environmental temperatures varied from $-40^{\circ}C\;to\;200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained with the static tensile test and at the intermediate strain-rate is from the high speed tensile test. Experimental results show that the strain-rate sensitivity increases at low temperature. It represents that as the strain-rate increases, the variation of flow stress becomes sensitive on the temperature. The results indicate that the flow stress of SPRC35R is more dependent on the changes of strain-rate and temperature than those of SPRC45E.