• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.9-9
• /
• 2006

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.7-13
• /
• 2014

In this paper, an effect on a GPS receiver by spoofing signal is analyzed and a GPS spoofing signal detection algorithm for GPS L1 C/A spoofing signal is proposed. A proposed detection algorithm monitors the correlation function distortion by the spoofing signal. If detected distortion is over a detection threshold, we can determine that the spoofing signal is received. The detection threshold is calculated from the statistical characteristics of a thermal noise. For verifying the suggested algorithm, a MATLAB-based simulation platform is implemented. This platform has functionalities to track GPS signal and measure the correlation values. By using this platform, the correlation function distortion by spoofing signal is observed. Also a performance of the algorithm proposed in this paper is applied and confirm the detection of a spoofing signal.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.3
• /
• pp.289-295
• /
• 2005

Instrumentation and Control (I&C) of the Neutral Beam Test Stand (NB- TS) Facility at the Korea Atomic Energy Research Institute (KAERI) for the Korea Superconducting Tokamak Advanced Research (KSTAR) project has been underway since the start of the project to answer the diverse requests arising from the various facets of the development and construction phases of the project. Optical signal transmission constitutes a significant portion of I&C works and has been performed for the entirety of the project. During the NB- TS construction and related experiments, significant achievements to a more accurate as well as more refined optical signal transmissions have been made. Examples of those I&C works that utilized the optical signal transmission are the Langmuir probe signal transmission, gradient grid current signal transmission, gas flow control and signal transmission, ion source temperature measurement, beam line component temperature monitoring, and coolant flow signal transmission, etc. These optical signal transition provisions are now performing part of the indispensable functions for the proper operation of the NB- TS facility. Attained experience and expertise are expected to be well applied to the upcoming main neutral beam injection (NBI) system construction for the KSTAR project.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.53-62
• /
• 2005

The NG-SDH system requires signal synchronization to synchronize incoming ethernet signal with GFP frame. The foreign nation research completes a chipset development until now and it secures a relation technique, but it does not secure a relation technique from domestic. Therefore, in this paper, we presented with signal synchronization method of Ethernet signal through GFP frame. We knew that the synchronized method of Ethernet signal through GFP-F must apply ingress & egress buffer and GFP Idle. We understood that the synchronized method of Ethernet signal through GFP-T must apply GFP Idle and $65B{\_}PAD$, and require maximum 3-bit addition & deletion of idle. Also we showed signal synchronization realization through simulation and obtained MTIE/TDEV characteristics and peak to peak jitter in egress output.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.665-670
• /
• 2016

This paper proposes a repeat-back jamming signal detection scheme using a correlation ratio test metric of a combined pseudo-random noise signal for global navigation satellite systems. The correlation ratio test metric allows for the monitoring of possible distortions in the signal correlation. The proposed scheme is a modified version of the correlation ratio test metric to detect a repeat-back jamming signal in a multipath environment. Through a Monte-Carlo simulation, it is confirmed that the proposed scheme detects almost the whole case, which is received a repeat-back jamming signal under the 6 dB jamming to signal power ratio.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.446-451
• /
• 2001

We made a laser induced grating spectrometer(LIGS) and measured the thermal grating signal generated in a $C_3$ $H_{8}$ flame. The thermal grating was formed in the C7Ha flame with two second-harmonic Nd:YAG pulse laser beams, and an LIGS signal was generated by Bragg scattering of a probe laser beam A $r^+.laser(488 nm). We found the modulation period of the signal depends linearly on the spacing of the grating set in the flame. We determined flame temperature by fitting the modulated signal and soot concentration with signal strength. Using this technique, we also obtained temperature profile and soot-particle distribution in a $C_3$ $H_{8}$ flame .e .

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.23-28
• /
• 2011

Michibiki is the first QZSS satellite, which was launched by a H-IIA rocket departing from the Tanegshima in Japan on 11 September, 2010 and now operated successfully. This paper presents the results obtained from processing of the L1 C/A signal transmitted from the QZSS satellite. The acquisition and tracking are performed by the L1 software receiver implemented by ETRI. The signal processing results show that QZSS L1 C/A signal is normally processed through the tracking loop results of FLL, PLL, and DLL, the EPL correlator output, and the C/No output. Finally, the paper demonstrates that the QZSS satellite could be used in the navigation system together with the GPS satellite in Korea.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.33-42
• /
• 1997

Fixed-point optimization utility software that can aid scaling and wordlength determination of digital signal processign algorithms written in C or C$\^$++/ language is developed. This utility consists of two programs: the range estimator and the fixed-point simulator. The former estimates the ranges of floating-point variables for automatic scaling purpose, and the latter translates floating-point programs into fixed-point equivalents for evaluating te fixed-point performance by simulation. By exploiting the operator overloading characteristics of C$\^$++/ language, the range estimation and the fixed-point simulation can be conducted just by modifying the variable declaration of the original program. This utility is easily applicable to nearly all types of digital signal processing programs including non-linear, time-varying, multi-rate, and multi-dimensional signal processing algorithms. In addition, this software can be used for comparing the fixed-point characteristics of different implementation architectures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1783-1793
• /
• 1993

Pattern recognition technique using fuzzy c-means algorithm and multilayer perceptron was applied to classify tool wear states in turning. The tool wear states were categorized into the three regions 'Initial', 'Normal', 'Severe' wear. The root mean square(RMS) value of acoustic emission(AE) and current signal was used for the classification of tool wear states. The simulation results showed that a fuzzy c-means algorithm was better than the conventional pattern recognition techniques for classifying ambiguous informations. And normalized RMS signal can provide good results for classifying tool wear. In addition, a fuzzy c-means algorithm(success rate for tool wear classification : 87%) is more efficient than the multilayer perceptron(success rate for tool wear classification : 70%).

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.423-425
• /
• 1998

In this paper, a novel Programmable Signal Conditioner(PSC) for Thermo Couple(T/C) without variable-resistance is proposed. It is fabricated by using a fully digitalized error-correction and calibration algorithm. In signal processing of T/C, since the output voltage of T/C is nonlinear and its level is very low, the circuitry become very complicated to reduce the converting error and identify the true thermal voltage signal. The newly proposed PSC has compensation and calibration algorithm not using variable resistor. Moreover structure can be very simple and it has highly precise output characteristics.