• 수산해양기술연구
• /
• 제30권2호
• /
• pp.71-77
• /
• 1994

A serious of study is carried out to practical use of the three-slot cambered otter board improved by the authors. As the first step, we designed main plates, slots and accessories, such as holding plate, fan-shaped towing plate, normans, center ring, etc. Standing on this design, we made the simple cambered and three-slot cambered model otter board with accessories in a linear scale 6:1. and carried out model test to examine the efficiency of these boards. The obtained results can be summarized as follows: 1. On the simple cambered board with accessories, the values of the maximum shear coefficient($C _{LX}$ ). drag coefficient(($C _{D}$) and hydrodynamic efficiency($C _{L}$/$C _{D}$ ) are 1.39, 0.56, 2.48 at $22^{\circ}$ of the angle of stall respectively. 2. On the three-slot cambered board with accessories, $C _{LX}$/$C _{D}$ and $C _{I}$/$C _{D}$ are 1.67, 0.92, 1.82 at $32^{\circ}$ of the angle of stall respectively. 3.$C _{LX}$ of board with accessories is smaller 10~12% than that of only the main plate, and the angle of stall is almost same. 4. $C _{LX}$ and the angle of stall of the three-slot cambered board with accessories are greater 20% and $10^{\circ}$ than that of the simple cambered board respectively.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.321-328
• /
• 1990

For the reliability analysis of Sin/Hip silicon nitride, such as Weibull modulus m, scale parameter $\sigma$0, and Batdorf crack density coefficient kB were obtained by 4-point MOR test. And its theoretical failure probabilities under arbitrary stress state were predicted using finite element analysis and KARA II reliability analysis program, which was programmed for both surface adn volume flaws. For the verification of this theoretical results, the experimental failure probabilities were measured using ring-to-ring tests at room temperature as well as 4-point MOR tests at 100$0^{\circ}C$, and were compared with theoretical failure probabilities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.482-483
• /
• 2007

For measurement of dielectric constants, the commercial parallel plate electrodes system with guard-ring electrode have been widely used up to now. The capacitance derived from the parallel plate electrodes capacitor with guard-ring electrode is calculated by the equation of ($C={\epsilon}\;{\cdot}\;\frac{area\;of\;electrod}{distance\;between\;electrodes}$). Therefore, in parallel plate electrode capacitor, the diameter of the guarded electrode, the gap size between guarded electrode and guard ring, and distance between two active electrode should be measured precisely to calculate dielectric constants from the measured capacitance. Consequently their mechanical measurement uncertainties are directly contributed. Especially the air-gap between the electrodes and dielectric specimen at the system must be existed and the measurement error derived from the air-gap is impossible to evaluate as measurement uncertainties. In this study, we analyze the uncertainty of the commercial dielectric constant test cell using 3 kinds CRMs.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.62-68
• /
• 1983

This study was to examine the drying characteristics of barley and the effect of moisture content of barley on milling performance. A barley variety, Jogang, having 35.0% of initial moisture content was used for this experiment. Thermo-hydrostatic dryer which consists of blower, condensor, heater, humidifier, drying chamber and control box, etc., was used for the drying experiment. The change in the weight of a barley sample was continuously measured by means of the ring type load cell installed inside the drying chamber. Milling test runs the samples having the predetermined moisture content were taken from each drying test run. A laboratory type barley miller was used for the milling test. The results of the study are summarized as follows: 1. The drying constants (k) applied for the thin layer drying model, (M-Me)/(Mo-Me) = $Ae^{-kt}$ were 0.155, 0.259 and 0.548, respectively, at the three levels of drying temperatures, $40^{\circ}C$, $50^{\circ}C$ and $60^{\circ}C$. The drying constants complied with the Arrhenius Equation, K = Ko exp (-C/T), were determined as $Ko=1.901455{\times}10^8$ and C = 6563. 2. The laboratory milling test indicated that the highest milled and head barley recovery was resulted from the sample which was dryed at $40^{\circ}C$. In general, the increase in the drying temperature from $40^{\circ}C$ to $60^{\circ}C$ indicated a negative effect on milling yields. 3. Also, the sample having 15% M.C. presented the highest milled and head barley recovery among the five moisture content levels (12, 15, 18,21 and 24%).

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.100-106
• /
• 1998

The wide open throttle performance and piston temperatures were measured by the change of fuel : gasoline and liquefied petroleum gas(LPG). Bench test method was developed and experimented to study the effect of temperature on the formation of carbon deposit. The bench test results were confirmed by measuring the piston temperature and observing the deposit production rate at an actual engine running condition. Results show that if the fuel of spark ignition engine is changed from gasoline to LPG, the output power decreases about 10% and the piston temperatures increase about 40~55$^{\circ}C$. In actual engine tests, because of this temperature increase, it was observed that the quantity of carbon deposit in the top ring groove increased in a big degree. Consuquently, it is known that the fing sticking may occur if the gasoline engine was rebuilt to LPG fuelled engine. Therefore, in order to preserve the durability of LPG fuelled engine, it is necessary to lower the piston temperature by hardware modificationor to reduce the carbon deposit by the improvement of engine oil.

• 대한화학회지
• /
• 제25권5호
• /
• pp.291-299
• /
• 1981

용액중에서 화학반응을 설명하기 위하여 한개의 대표적인 입자의 반복적 충돌현상까지 고려한 동역학적인 이론을 경구모델을 사용하여 연구하였다. 반응성을 지닌 대표적인 입자의 상공간 밀도의 시간상관함수가 만족시키는 동역학방정식을 유도하였고 이로부터 비활성 용매 S중에서 일어나는 A + B ${\rightleftharpoons$ C + D 형태의 가역반응에 관계되는 반응속도 계수의 인자를 투영연산자방법으로 구하였다.

• 한국광학회지
• /
• 제31권1호
• /
• pp.13-19
• /
• 2020

광섬유 사냑 간섭형 센서를 이용해 수중 음향을 측정하기 위하여 링형 탐촉자를 적용하는 경우 민감도를 이론과 실험을 통하여 조사한다. 링형 탐촉자는 단일 모드 광섬유를 지름 5 cm의 링형으로 감아서 접착제로 패키징하였다. 링형 탐촉자는 감지 광섬유의 길이를 46.84 m로 하여 제작한 A형 탐촉자와 감지 광섬유의 길이를 112.22 m로 한 B형 탐촉자를 준비하였다. 수중 음향 시험은 상용 음향 발생기와 1 m 떨어진 거리에서 링형 탐촉자를 사용하여 50, 70, 90 kHz의 주파수에 대하여 20~100 Pa의 음향 압력 범위에서 음향 민감도를 조사하는 실험을 수행하였다. 실험 결과, 링형 탐촉자는 주파수에 대하여 다른 민감도를 나타내었으며, 이론과 비교하기 위하여 평균값을 구하였다. 세 주파수에 대한 평균 민감도는 A 탐촉자와 B 탐촉자에 대하여 각각 25.48 × 10^-5, 60.79 × 10^-5 rad/Pa으로 측정되었으며, 이로부터 영률 보정 계수 c값을 0.35로 결정할 수 있었다.

• 대한수의학회지
• /
• 제14권1호
• /
• pp.77-90
• /
• 1974

Hemolytic reaction of normal fresh chicken serum on sheep erythrocytes was studied and the following experimental results were obtained and summarized. 1. Chicken sera, 258 (78%) out of 344 samples showed hemolytic activity on sheep erythrocytes. 2. Distribution of a different hemolytic titer of chicken sera was not dependent to sex and age difference of test chicken. 3. Hemolytic activity of serum component obtained from normal fresh chicken was heat inactivated at $56^{\circ}C$. 30 minutes heating. 4. The most enhanced hemolytic activity of chicken serum on sheep erythrocytes was observed at the incubation temperature of $46^{\circ}C$. 5. The most effective pH for the hemolytic reaction of chicken serum on sheep erythrocytes was observed at 7.0, and pH 6.0 or 8.5 resulted less or no hemolysis. 6. Hemolytic reaction of chicken serum and sheep erythrocytes required Mg⧻ and Ca⧻ ions as, co-factor, and the former was required more compared to the latter. 7. Hemolytic activity of chicken serum was observed in ChC 2, 4 fraction but not in ChC 1, 3, ChC 3, 4, ChC 1, 2, 4 and ChC 1, 2, 3 fractions. 8. In electron micrography, morphological changes of sheep erythrocyte membrane by normal chicken serum was similar to that of immune hemolysis: that was, the hemolytic hole was circular and it was surrounded with a white ring. 9. Electron micrography of morphological changes on sheep erythrocyte membrane indicated that the size of hemolytic hole and white ring were functional to the chicken serum concentration used and reaction time.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.622-629
• /
• 2007

Some worker is occupationally exposed to cold and freezing environment. The cold stimuli in the working environment impose physiological and psychological loads on workers to decrease the task performance. The purpose of this study is to investigate the cold stimuli of cold and freezing stores widely used in Busan can make an effect on human's physiological responses and task performance, experimentally and analytically. In the experiment, 5 workers are selected as subjects, and then their skin temperatures of hand and ear, heart rates, blood pressure, and ring test performances in cold($3^{\circ}C$) and freezing($-22^{\circ}C$) stores were measured for 21 minutes and analyzed by using statistical method. It is observed that a physiological variation and the task performance are significantly influenced by an exposure time as well as a strength of cold stimuli. Also, it is suggested the exposure limiting times for the useful manual work and the performance predict model of the ring tasks. The result of this study will be useful for a fundamental data of which design the standard task time of manual tasks and solve the job placement problem of worker selection and placement in cold environment.

• 한국식물병리학회지
• /
• 제11권4호
• /
• pp.361-366
• /
• 1995

A virus was isolated from petunia (Petunia hybrida Vilm.) plants showing chlorotic ring spots on the leaves and color breaking on the flowers, and was identified as petunia asteroid mosaic virus (PAMV). Identification of the PAMV was established by host range test, electron microscopy, serological reaction, and physical properties of the virus. In the host range test, Nicotiana glutinosa, N. rustica, N. clevelandii, P. hybrida, Gomphrena globosa, and Chenopodium amaranticolor were systemically infected with the virus. The virus produced local lesions on inoculated leaves of N. tabacum‘Samsun’, N. tabacum‘Xanthi nc’, Datura stramonium, Vigna unguiculata‘White eye’, C. quinoa, Capsicum annuum, Vicia faba, and Lycopersicon esculentum‘Rutgers’. However, Cucurbita sativus and C. moschata did not show any symptoms. PAMV particles were isometric with 30 nm in diameter. The crude sap from G. globosa infected with the virus reacted positively with antiserum to tomato bushy stunt virus (TBSV) in agar gel double diffusion test. Thermal inactivation point of the virus was 8$0^{\circ}C$ and the virus retained its infectivity at the dilution of 10-4. Longevity in vitro of the virus was estimated longer than 35 days.