• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.341-347
• /
• 2005

To perform a cryogenic development test for Tribo-elements in a turbopump, a cryogenic bearing and seal test facility (BSTF) is designed and currently under construction in KARI. The working fluid is liquid nitrogen operating at a temperature $-197^{\circ}C$. The maximum operating pressure and volume flow rate of BSTF are 100 bar and 10 liters per second, respectively. The development tests of floating ring seals, inter-propellant seals (IPS) and cryogenic ball bearings in a turbopump will be performed using the BSTF. This paper briefly described design requirements and procedures of BSTF.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.71-76
• /
• 1998

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.59-69
• /
• 1998

ABS sensor ring has been manufactured by P/M method using 400 series ferrite stainless steel. the results are as following : It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to C/V joint, and has a good hardness properties endurable In sand and pebble impact.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.60-66
• /
• 1998

ABS sensor ring has been manufactured by P/M method using 400 series ferrite stainless steel. The results are as following: It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to C/V joint, and has a good hardness properties endurable to sand and pebble impact.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2122-2132
• /
• 1995

There are some cases which require to grasp the abrasion resistance property in the fields of the high-technology to be required the high specific strength and modulus. In this study, wear test with the various test temperature and velocity were performed in the SiCw/A16061 composite and A16061 matrix using the wear test machine of the ring-on-disc type. As the results, the friction and wear properties by various test temperature and velocity were examined. The worn surface has observed by scanning electron microscope in order to examine the wear mechanism.

• Korean Journal of Pharmacognosy
• /
• v.17 no.2
• /
• pp.178-183
• /
• 1986

It was our working hypothesis that introduction of 11-keto groups to 12-oleanene/ursene series of triterpenoids should endow them with corticoid-like activities, since pharmacological actions of glycyrrhetinic acid (GA) are known to be caused by inhibition on $corticoid-{\delta}^4-reductase$. 11-Keto-triterpenoids derived artificially in these studies, such as 11, 19-diketo-18, 19-secoursolic acid methyl ester(I), $11-keto-{\beta}-boswellic$ acid derivatives (IIa-IIc), 11-Keto-presenegenin dimethyl ester (III), II-keto-oleanolic acid derivatives (IVa-IVd) and 11-keto-hederagenin (V) possess the fundamental functions of ${\alpha},\;{\beta}-unsaturated$ ketone on C-11 and hydroxyl group on C-3, as like GA (VI). Additionally, they involve the carboxyl groups on rings A (II, III), D (I, III, IV, V) and E (VI), and the hydroxyl groups on rings A (III, V) and C (III). All the compounds competitively inhibited $corticoid-5{\beta}-reductase$, and the highest inhibitory potency appeared in I. All of them except $3,\;11-diketo-{\beta}-boswellic$ acid methyl ester (IIc) were more effective about five times to twice than GA. On carrageenin-induced edema test, compounds I and IVa-IVd showed anti-inflammatory activities, but III enhanced rather edema. Structure-activity relations were found in the aspects of hydrophilicity of ring A and hydrophobicity of rings C/D. The more they were hydrophilic in ring A and hydrophobic in rings C/D, the more they inhibited the enzyme. And the more they were hydrophobic in rings C/D, the more they exhibited antiiflammatory activities. However, the increased hydrophilicity in ring A resulted in increasing edema, probably due to a nonspecific inhibition on $aldosterone-5{\beta}-reductase$.

• Transactions of Materials Processing
• /
• v.31 no.4
• /
• pp.186-193
• /
• 2022

The application of UHSS sheet is being expanded up to 50% to reduce the weight of automobiles and improve safety. However, due to the high strength and low elongation of the ultra-high tensile strength steel sheet, product defects such as spring back and mold defects such as cracks and chippings also occur. In this study, Pin/Ring on Disc and Spiral wear tests were conducted to evaluate the durability of Ti/Cr-coated molds for forming 1.2GPa grade UHSS sheets. Component analysis and thickness were measured for each coating layer, and hardness and adhesion were investigated to determine mechanical properties. Combining the results of various wear tests, it was found that the TiAlN coating had the best wear and sticking resistance.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.21-27
• /
• 2004

The floating ring seal has an advantage to find the optimum position by itself, which is used in the turbo pump of a liquid rocket. The main purpose of seals is to reduce the leakage. Especially, seals of the turbo pump for the liquid rocket engine are operated under the serious conditions such as high pressure above 10 MPa, very low temperature about $-180^{\circ}C$ and high rotating speed above 25,000 rpm. So, rotordynamic stability is very important for the system stability. In this paper, the leakage and dynamic characteristics of floating ring seals were investigated by a experimental and analytical method. The theoretical results of the leakage performance for the floating ring seal showed much higher than that of experimental results. On the other hand, the results of stiffness and damping characteristics showed similarity each other. As the shaft speed was increasing, the whirl frequency ratio was increased in the experimental results.

• Korean Journal of Veterinary Research
• /
• v.12 no.1
• /
• pp.141-144
• /
• 1972

1. Of 4,112 earth worms, 3,480 were classified as Eisenia foetidae, and 3,277 of the species were infested with the larvae of Metastrongylus apri. 2. Cresol and $CaCN_2$ were found effective in the insecticidal test of earthworms. 3. The nose ring was effective, in pigs, to prevent digging and eating the earthworms and resulted a lower lungworm incidence in pigs. 4. The best place to put the nose ring was the nasal septum.

• Transactions of Materials Processing
• /
• v.1 no.1
• /
• pp.42-51
• /
• 1992

The ring compression test has been widely employed as an experimental means to determine the friction factor. The calibration curves are obtained by the rigid-plastic finite element analysis for various work-hardening exponent and strain-rate hardening exponent. The effects of work-hardening exponent and strain-rate hardening exponent are thoroughly studied and discussed from the finite element computation. The change of friction factor during height reduction in ring compression is also discussed. Then, the method to estimate the change of friction factor during ring compression is proposed.