• Environmental Analysis Health and Toxicology
• /
• 제24권1호
• /
• pp.43-52
• /
• 2009

Fullerene의 유전독성을 평가하기 위하여 Chinese hamster유래의 난소유아세포(CHO-K1 cell)를 이용하여 직접법(-S9)과 대사활성화법(+S9 mix)의 염색체이상시험을 실시하였다. 시험물질은 1% CMC 나트륨염의 현탁액(1% CMC 용액)에 희석하여 조제하였다. 대사활성화를 시키지 않은 직접법의 염색체이상시험에서 24시간 투여군은 8단계의 농도(0.078, 0.156, 0.313, 0.625, 1.25, 2.5, 5, 10 mM)로 투여하여 실시하였다. 투여 농도 증가에 따른 염색체이상의 빈도가 증가하는 양상이 나타나지 않았다. 48시간의 투여군에서는 8단계의 농도(0.078, 0.156, 0.313, 0.625, 1.25, 2.5, 5, 10 mM)로 투여하여 실시하였는데 투여 농도 증가에 따른 염색체이상의 빈도가 증가하는 양상이 나타나지 않았다. 배수체의 염색체이상은 직접법에서 관찰되지 않았다. 대사활성화법을 이용하여 6시간 시험물질을 투여한 시험에 있어서는 8단계의 용량단계(0.078, 0.156, 0.313, 0.625, 1.25, 2.5, 5, 10mM)를 설정하였는데 투여 농도가 증가함에 따른 염색체이상빈도의 증가양상이 관찰되지 않았다. 이상의 결과를 종합할 때 본 시험물질은 본 시험 조건하에서 CHO-K1세포에서 대사활성화를 시켰을 때 염색체이상을 유발하지 않는 것으로 판단된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제20권4호
• /
• pp.354-362
• /
• 1991

To investigate nutritional and biochemical values of buckwheat, amino acids and minerals in buckwheat harvested from Kangweon-do were analysed. Mixed flour between buckwheat and wheat were made to be used for buckwheat noodle and were also analysed minerals and major nutrients in composite flours. When three different levels of flour mix were compared, major nutrients were about same among those mixes but minerals were higher by adding more buckwheat flour, especially by adding more imported buckwheat flour. From this mixed flour, 9 minerals and 16 amino acids including 9 essential amino acids were analysed. Contents of selenium, sodium and magnessium were very high in buckwheat flour, Therefore, nutritional value of domestic buckwheat was highly evaluated. BAP method was used to determine the change of gelatinization in the noodles prepared by extruder at 8$0^{\circ}C$, and in the noodles during freeze drying and refrigeration. 70% of gelatinization was done during noolding process and retrogradation was severe during refrigeration.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.565-568
• /
• 2008

Domestic area of most be happened chloride deicer damage. Because daily mean temperature is below 0$^{\circ}C$ from the area of domestic most. Concrete durability influence Air Content. Presently, We used to AE(air-entraining agent) for increase freeze-thaw durability. So, on concrete Air Spacing ratio used $200{\mu}m{\sim}230{\mu}m$ in Canada and under $250{\mu}m$ in Japan institution. Use of Air content has been and will continue to be a major part of concrete durability and scaling. Chloride-containing chemicals such as calcium chloride or rock salt are main deicers for the road. The prepared optimum mix concrete in this study show that freeze-thaw and scaling resistance of Non-AE(air content 1.5%) and AE (air content 4.5%, 7.2%). Solution concentrations of deicing agent were good result, and the pore system and change of hydration products is not difference comparing before freeze-thaw test.

• Journal of the Korean Wood Science and Technology
• /
• 제25권3호
• /
• pp.58-65
• /
• 1997

This research was carried out to evaluate the effect of process variables on mechanical properties of the wood fiber-thermoplastic fiber composites by turbulent air mixing method. The turbulent air mixer used in this experiment was specially designed in order to mix wood fiber and thermoplastic polypropylene or nylon 6 fiber, and was highly efficient in the mixing of relatively short plastic fiber and wood fiber in a short time without any trouble. The adequate hot - pressing temperature and time in our experimental condition were $190^{\circ}C$ and 9 minutes in 90% wood fiber - 10% polypropylene fiber composite and $220^{\circ}C$ and 9 minutes in 90% wood fiber 10% nylon 6 fiber composite. Both in the wood fiber - polypropylene fiber composite and wood fiber- nylon 6 fiber composite, the mechanical properties improved with the increase of density. Statistically, the density of composite appeared to function as the most significant factor in mechanical properties. Within the 5~15% composition ratios of polypropylene or nylon 6 fiber to wood fiber, the composition ratio showed no significant effect on the mechanical properties. Bending and tensile strength of composite, however, slightly increased with the increase of synthetic fiber content. The increase of mat moisture content showed no significant improvement of mechanical properties both in wood fiber - polypropylene fiber composite and wood fiber nylon 6 fiber composite. Wood fiber - nylon 6 fiber composite was superior in th mechanical strength to wood fiber-polypropylene fiber composite, which may be related to higher melt flow index of nylon 6 fiber(22g/10min) than of polypropylene fiber(4.3g/10min).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제12권9호
• /
• pp.3815-3826
• /
• 2011

TThis study was undertaken to make trial costumes of ball jointed dolls for promoting the beauty of Korean cultural product with historical research of upper class ladie's costume from late Goryeo to early Joseon, the very unknown period in the Korean costume history. The ladies' costume from late Goryeo to early Joseon are characterized by their full silhouette, fusion with clothings of Yuan and Ming, revival of early Goryeo styles, well-developed weaving skill of ramie, a showy costume from Buddhist civilization. After investigation of researcher with literature, painting, and relics in 13-14C, 8 clothing items were outsourced totally. Items were formed as a set concept, but consumer can choose each costume as an single item and can make varied mix also. Dart, small ties, and thick fabrics were used in doll costumes partly because ball jointed doll's body has different characteristics from that of human beings. Developing research of manufacturing company's system for ready-made product remains to be considered in the future.

• Journal of Korean Academy of Oral Health
• /
• 제42권4호
• /
• pp.224-228
• /
• 2018

Objectives: As a first step to study the anticaries effect of ethanol alone, we investigated the effects of ethanol on the expression levels of the atpB gene and proton permeability of Streptococcus mutans in suspension cultures. Methods: S. mutans UA159 was grown in brain heart infusion medium at either pH 4.8 or 6.8. The total extracted RNA was reverse-transcribed into cDNA using a $Superscript^{TM}$ First-Strand Synthesis System. The resulting cDNA and negative controls were amplified by ABI PRISM 7700 real-time PCR system with SYBR Green PCR Master Mix. For proton flux assay, bacterial suspensions were titrated to pH 4.6 with 0.5 M HCl, and then additional 0.5 M HCl was added to decrease the pH values by approximately 0.4 units. The subsequent increase in pH was monitored using a glass electrode. Ten percent (v/v) butanol was added to the suspensions at 80 min to disrupt the cell membrane. Results: In a concentration-dependent manner, ethanol alone not only decreased the growth rate of S. mutans and the expression of the atpB gene but also increased the proton permeability at both pH 4.8 and 6.8. Conclusions: These findings suggest that ethanol has the potential for an anticaries ingredient. We believe that ethanol may be used together with fluoride and/or other cariostatic agents in order to develop better anticaries toothpastes and/or mouthrinses.

• Journal of the Korea Institute of Building Construction
• /
• 제19권4호
• /
• pp.307-312
• /
• 2019

Sludge generated in the production of ready-mixed concrete is classified as waste and processed at a high cost. In particular, small and medium-sized ready-mix manufacturer are burdened with such costs, and some companies are illegally processing them. Therefore, the purpose of this study is to suggest a method for recycled remicon sludge as a concrete block composition. When the remicon sludge is simply dried, the residual chemical admixture and ettringitee contained in the sludge are present, so that the compressive strength of the concrete block and the compressive strength after freezing and thawing are largely deteriorated to meet the quality standards of the concrete shore and retaining wall block It was not possible to do. As a method for satisfying the physical performance, it was found that the remicon sludge was calcined at a high temperature of about $900^{\circ}C$. to decompose ettringite and residual chemical admixture and then used it.

• Journal of The Korean Society of Agricultural Engineers
• /
• 제61권3호
• /
• pp.31-41
• /
• 2019

More than 90% of roadway in the world are paved as asphalt concrete pavement due to its excellent properties compared with other paving materials; excellent riding quality, flexibility, anti-icing property and easy maintenance-ability. In this study, to make best use of the softer property of the asphalt mixture, the flexible sand asphalt mixture (FSAM) was developed for pedestrian ways. The mix design was conducted to prepare FSAM using PG64-22 asphalt, screenings (sand) less than 5mm, crumb rubber, hydrated lime and limestone powder without coarse aggregate. The deformation strength ($S_D$), indirect tensile strength (ITS) and tensile strength ratio (TSR) tests were conducted to make sure durability of FSAM performance. The impact energy absorption and flexibility were measured by drop-boll test and the resilient modulus ($M_R$) test. The impact energy absorption of FSAM was compared with normal asphalt pavement, concrete pavement, stone and concrete block for pedestrian way. As a result of drop-boll test, FSAM showed higher impact energy absorption compared with other paving materials with the range of 18% to 43%. Impact energy absorption of FSAM increased with increasing test temperature from 5 to $40^{\circ}C$. The results of $M_R$ test at $5^{\circ}C$ showed that the flexibility of FSPA was increased further, because the $M_R$ value of the sand asphalt was measured to be 38% lower than normal dense-graded asphalt mixture (WC-1). Therefore, it was concluded that the FSAM could provide a high impact absorbing characteristics, which would improve walking quality of the pedestrian ways.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• 제35권10호
• /
• pp.207-215
• /
• 2019

The aim of the research is analyzing the simple adiabatic temperature rising properties and the heat of hydration based on different placing timing of the mass concrete depending on various replacing ratios of blast furnace slag to comparative analyze the thermal cracking index and cracking possibility. As a result from the experiment, a suggested adiabatic temperature rising equation based on various blast furnace slag replacing ratios can be provide favorable correlation with over 0.99 of $R^2$ value by applying the initial induction period. With this relationship, more accurate prediction of the amount of the hydration heat rising and heating timing, and it is known that there is an approximately $13.1^{\circ}C$ of gap between plain concrete without blast furnace slag and concrete with 80 % of replacing blast furnace slag. To control the setting time and heat rising gap, the mix designs between top and bottom concrete casts were changed 15 cases, and D, E, H, I, and L models of controlling the heat of hydration showed 41.23 to $46.88^{\circ}C$ of core temperature and 0.98 to 1.27 of thermal cracking index. Therefore the cracking possibility was 15 to 52 % of favorable results of possibly controlling both the cracking due to the internal and external retainment and concrete temperature at early age.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제11권3호
• /
• pp.277-286
• /
• 2009

A suitability of a thixotropic grout developed in this study has been examined through laboratory tests on strength, segregation, and viscosity. The thixotropic grout is a mixture of two types of liquid components. The A-liquid component consists of cement, water, and MG-A and the B-liquid component consists of scarlet, water, and MG-B. Unconfined compressive strength of specimens prepared with a prefer mix-proportion satisfied a design criteria for the backfilling of tail voids. A material segregation phenomenon under water condition was not observed in the thixotropic grout whereas it was observed in the existing silica-type grout. In addition, viscosity tests have been rallied out on the thixotropic grout to verify the capability of a long-distance delivery in the field. Both the A-liquid component and the B-liquid component maintained a viscosity of below 2,000 cP for 120 minutes. This experimental result confirms that two liquid components guarantees a long-distance delivery in tile field application.