• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.163-166
• /
• 2001

The stochiometric mix of evaporating materials for the ZnGa$_2$Se$_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, ZnGa$_2$Se$_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of ZnGa$_2$Se$_4$ single crystal thin films measured from Hall effect by van der Pauw method are 9.63x10$^{17}$ cm$^{-3}$ , 296 $\textrm{cm}^2$/V.s at 293 K, respectively, From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the ZnGa$_2$Se$_4$ single crystal thin film, we have found that the values of spin orbit splitting $\Delta$So and the crystal field splitting $\Delta$Cr were 251.9 MeV and 183.2 meV at 10 K, respectively. From the photoluminescence measurement on ZnGa$_2$Se$_4$ single crystal thin film, we observed free excition (E$_{x}$) existing only high quality crystal and neutral bound excition (A$^{0}$ ,X) having very strong peak intensity. Then, the full-width-at-half-maximum(FWHM) and binding energy of neutral acceptor bound excition were 11 meV and 24.4 meV, respectivity. By Haynes rule, an activation energy of impurity was 122 meV.on energy of impurity was 122 meV.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.79-86
• /
• 2003

The purpose of study is to offer base data for high fluid concrete mix property, as grasp effect of aggregate to reach much more effect for producing high fluid concrete. For this study, there are three types of combined aggregates, river sand + river aggregate(type A), river sand + crusted aggregate(type B), washed sea sand + crushed aggregate(type C) and take a factor, water-contents, water-binder ratio and S/a. And so, we had following conclusion, resulting application-ability of high fluid mortar by K-slump tester to use a handy consistency measuring instrument. And so, we had following conclusion, resulting application-ability of high fluid concrete by K-slump tester to use a handy consistency measuring instrument. 1) In cafe of regular water binder ratio, high fluid concrete suffered much effect of combined aggregates and water binder ratio. Range of water binder ratio by combined aggregates is w/b 0.4 downward(type A and B), w/b 0.35 downward(type C). 2) Water contents to need for producing high fluid concrete is minimum 170kg/$\textrm{m}^3$ without regard to combined aggregates. 3) The effect of S/a on high fluid concrete by combined aggregates is approximately S/a 50% (type A and B), s/a 50-55% (type C). 4) Consistency measuring of high fluid concrete by K-slump tester is possible and first indication value, high fluid concrete can be produced, is 6~10.5cm.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.124-132
• /
• 2022

콘크리트 내의 부식전위는 노출환경 및 배합에 따라 크게 변화한다. 본 연구에서는 피복 두께, 염화물 농도, 물-시멘트 비를 변수로 하여 RC 시편을 제조하였으며, 철근과 표면과의 전위차를 평가하는 HCP 측정을 수행하였다. 또한 매립된 철근과 상대전극을 이용하여 OCP의 측정하였다. 한천과 NaOH 수용액을 이온교환물질로, Hg/HgO를 기준전극으로 사용하여 OCP를 측정하였는데, HCP에 비하여 온도에 더욱 민감하게 작용하였다. 영향 인자 중 존치 기간 및 염화물 농도는 피복 두께 및 물-시멘트 비보다 상대적으로 큰 영향을 가지고 있었다. 또한 전체 측정된 HCP 및 OCP는 피복 두께 및 물-시멘트와 뚜렷한 선형관계를 나타내었다. 다중회귀분석을 통하여 HCP와 OCP의 관계를 정량화하였으며 온도를 고려하여 개선된 상관성을 도출하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.83-83
• /
• 2003

The stochiometric mix of evaporating materials for the CuInSe$_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CuInSe$_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were 62$0^{\circ}C$ and 41$0^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of CuInSe$_2$ single crystal thin films measured from Hall effect by van der Pauw method are 9.62$\times$10$^{16}$ cm$^{-3}$ , 296 $\textrm{cm}^2$/V.s at 293 K, respectively From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the CuInSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting ΔSo and the crystal field splitting ΔCr were 6.1 meV and 175.2 meV at 10 K, respectively. From the photoluminescence measurement on CuInSe$_2$ single crystal thin film, we observed free excition (Ex) existing only high quality crystal and neutral bound exiciton (D$^{\circ}$,X) having very strong peak intensity. Then, the full-width-at -half-maximum(FWHM) and binding energy of neutral donor bound excition were 7 meV and 5.9 meV, respectivity. By Haynes rule, an activation energy of impurity was 59 meV.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.993-1001
• /
• 2024

The TANDEM project is a European initiative funded under the EURATOM program. The project started on September 2022 and has a duration of 36 months. TANDEM stands for Small Modular ReacTor for a European sAfe aNd Decarbonized Energy Mix. Small Modular Reactors (SMRs) can be hybridized with other energy sources, storage systems and energy conversion applications to provide electricity, heat and hydrogen. Hybrid energy systems have the potential to strongly contribute to the energy decarbonization targeting carbon-neutrality in Europe by 2050. However, the integration of nuclear reactors, particularly SMRs, in hybrid energy systems, is a new R&D topic to be investigated. In this context, the TANDEM project aims to develop assessments and tools to facilitate the safe and efficient integration of SMRs into low-carbon hybrid energy systems. An open-source "TANDEM" model library of hybrid system components will be developed in Modelica language which, by coupling, will extend the capabilities of existing tools implemented in the project. The project proposes to specifically address the safety issues of SMRs related to their integration into hybrid energy systems, involving specific interactions between SMRs and the rest of the hybrid systems; new initiating events may have to be considered in the safety approach. TANDEM will study two hybrid systems covering the main trends of the European energy policy and market evolution at 2035's horizon: a district heating network and power supply in a large urban area, and an energy hub serving energy conversion systems, including hydrogen production; the energy hub is inspired from a harbor-like infrastructure. TANDEM will provide assessments on SMR safety, hybrid system operationality and techno-economics. Societal considerations will also be encased by analyzing European citizen engagement in SMR technology safety.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2828-2834
• /
• 2024

This research intends to recycle bone and incorporate it into concrete for radiation shielding application using Phy-X/PSD software. Cement, sand and granite were mixed in proportion of 0.5 kg:1 kg:1 kg to obtain sample A. Other concretes composing of cement, sand, granite and bone ash was in proportion 0.45 kg:1 kg:1 kg:0.05 kg, 0.1 kg:1 kg:1 kg:0.4 kg and 0.35 kg:1 kg:1 kg:0.15 kg to obtain samples B, C and D respectively. 0.5 water-to-cement (W/C) ratio was adopted throughout the mixes because the control mix contain the normal water quantity for normal hydration of cement. Replacing the bone ash for the cement in the fabricated concretes enhances their densities where the fabricated concretes' density decreased from 2.33 g/cm³ to 2.22 g/cm³ by raising the reinforcing bones fly ash concentration from 0 to 0.15 kg. Additionally, increasing the bones fly ash concentration within the fabricated concretes increases their linear attenuation coefficient (LAC) where the fabricated concretes' μ values at 0.662 MeV reach 0.181 cm^-1, 0.178 cm^-1, 0.174 cm^-1, and 0.171 cm^-1, respectively for concretes A, B, C, and D. The use of other local materials is recommended, as it improves waste management being the major aim of the sustainable development goal.

• 핵의학기술
• /
• 제13권3호
• /
• pp.143-146
• /
• 2009

Purpose: We use the centrifugation of refrigeration state in separation of blood serum, Anti-ds-DNA, Vitamin $B_{12}$/Folate and GAD-Ab assay. However, Cortisol urine and 25-Hydroxyvitamin $D_3$ ($25OHD_3$) are conducted centrifuge at room temperature. This is troublesome that change centrifugation temperature into room temperature due to using of most assays at cold temperature. Therefore when using centrifuge after extraction of Cortisol urine and $25OHD_3$, we conducted researches on effect of the centrifugation temperature in assay results. Materials and Methods: In Cortisol urine, add dichloromethane 1.0 mL in urine $500\;{\mu}L$, mix for 15 minutes, and then centrifuge for 8 minutes at 2600rpm. In $25OHD_3$ add acetonitrile 0.5 mL in serum $200\;{\mu}L$, and then centrifuge for 8 minutes at 2600rpm. Those experiments were conducted centrifuge at room temperature and $4^{\circ}C$. And experiments conducted immediately after centrifugation at $4^{\circ}C$ and standing for 20 minutes after centrifugation $4^{\circ}C$. Results: In Cortisol urine, room temperature result in 1.93, 2.18, 2.43, 9.45, 14.2 (${\mu}g/dL$). Experiments of performing immediately after centrifuge at $4^{\circ}C$ result in 1.8, 2.0, 2.3, 8.1, 13.7 (${\mu}g/dL$). Experiments of performing after 20 minutes result in 2.1, 2.1, 2.7, 9.95, 14.35 (${\mu}g/dL$). On the other hand, the $25OHD_3$ tests conducted at room temperature result in 7.13, 26.6, 35.8, 48.2, 74.8 (ng/dL). Experiments were conducted immediately by pipetting after $4^{\circ}C$ centrifugation result in 7.53, 30.9, 40.3, 61.5, 89.1 (ng/dL) as results are higher than experiments at room temperature. The experiments that conducted centrifuge at $4^{\circ}C$ and then left at room temperature for 20 minutes result in 7.40, 32.4, 41.3, 51.6, 85.6 (ng/dL). Conclusions: Experiments were conducted by using centrifuge at $4^{\circ}C$ are higher or lower than room temperature. The differences between results of standing for 20 minutes after centrifuge at $4^{\circ}C$ and those of centrifuge at room temperature are less than conducting immediately. It is concerned that experiments conducted immediately after centrifuge at $4^{\circ}C$ are incorrect, because tubes become dim due to temperature differences between $4^{\circ}C$ and room temperature. Therefore, it is desirable to centrifuge at room temperature as manual and we should pipet promptly without stopping.

• 콘크리트학회논문집
• /
• 제25권3호
• /
• pp.339-345
• /
• 2013

이 연구는 200000 $m^3$의 용량을 갖는 지하식 LNG 저장탱크의 지붕 콘크리트에 대한 요구성능 및 이에 따른 콘크리트의 최적배합비를 도출하고, 현장시공의 자료로 제안하기 위한 것이다. 지붕 콘크리트는 돔형 지붕의 경사기울기에 따라 굳지 않은 콘크리트의 시공성 및 충전성이 요구된다. 또한, 1.4~0.6 m의 지붕두께를 고려한 수화열 저감과 콘크리트 타설 후의 프리스트레싱 작업 및 air support의 제거공정에 따른 단계별 압축강도의 확보가 중요한 요구성능이다. 이러한 조건을 고려하여 지붕의 기울기가 $20^{\circ}$ 미만일 경우에는 슬럼프 $100{\pm}25$ mm, $20^{\circ}$ 이상일 경우에는 $150{\pm}25$ mm로 선정하였으며, 경시변화 60분을 만족해야 한다. 특히, 91일 재령의 설계기준강도 30 MPa, 프리스트레싱 작업시 7일 재령의 압축강도 10 MPa, air support 제거공정에서 21일 재령의 압축강도 14 MPa을 만족해야 한다. 석회석 미분말의 최적 치환율은 구속시험 결과에 따라 정하였으며, 주요 배합변수는 물-시멘트비, 잔골재율 및 고성능 AE감수제의 첨가율 등이다. 배합시험 결과, 저열 포틀랜드 시멘트 및 석회석 미분말을 사용한 지붕 콘크리트의 최적배합 조건은 석회석 미분말의 최적 치환율 25%(내할), 물-시멘트비 57.8%, 잔골재율 42.0%로 나타났으며, 공기량 및 슬럼프의 시험결과도 경시변화 60분까지 성능을 만족하였다. 또한, 단열온도 상승시험의 결과, 단열온도 상승양($Q{\infty}$)이 $26.3^{\circ}C$, 상승속도(${\gamma}$) 0.58로 선행탱크(TK-13,14)와 비교해 볼 때 매우 낮게 나타나 수화열 저감의 효과를 기대할 수 있다. 이러한 요구성능 및 최적배합 조건을 만족하는 설계기준강도 30 MPa(배합강도 36 MPa)의 지하식 LNG 저장탱크의 지붕 콘크리트용으로 제안하였다.

• 아시안잔디학회지
• /
• 제24권1호
• /
• pp.45-49
• /
• 2010

환경문제를 야기 시킬수 있는 질소의 용탈에 관한 문제는 수많은 연구를 통해 그 결과를 문헌에서 찾아볼 수 있다. 그러나 대부분의 연구가 질소의 토양내 용탈에 관해서 이루어진 반면에 토양의 답압과 토양의 종류에 따라 질소의 용탈 정도에 관한 연구는 그 결과를 문헌에서 찾아 보기가 어렵다. 본 연구는 토양의 종류와 답압의 정도가 질소의 용탈에 미치는 영향 그리고 토양에 잔류된 질소가 켄터키블루그래스의 성장에 주는 영향에 대해서 알아보기 위하여 수행 되었다. 질소는 총 147 kg $ha^{-1}$이 12주 동안 3회에 걸쳐 나누어 시비되었다. 토양의 종류는 성분비율에 따라 76.0:24.0, 80.8:19.2, 87.0:13.0 그리고 93.7:6.3% (sand:soil)의 4가지로 구성이 되었다. 토양은 PVC 파이프에 30 cm 깊이로 조성이 되었으며 토양층 밑에 5 cm의 자갈층으로 구성되었다. PVC 파이프 밑부분의 구멍을 통해 질소용탈수의 수집을 용이하게 하였으며 질소외 영양성분을 위해 Hoagland solution에서 질소만 제외하여 사용되었다. 켄터키블루그래스의 질과 예초량이 매주 측정이 되었으며 예초물은 건물량 측정을 위해 예초후 67도에서 24시간 동안 건조되었다. 질소용탈수는 매주 PVC 파이프의 밑부분을 통해 매주 수집이 되었다. 6.1 J $cm^{-2}$ 이상의 답압에너지는 더 많은 표면배수의 가능성을 야기 시킬 수 있다. 3.0과 6.1 J $cm^{-2}$ 사이의 답압에너지는 다른 처리구에 비해 더 많은 건물량이 측정이 되었고 적은 질소가 용탈이 되었다.

• 유기물자원화
• /
• 제10권2호
• /
• pp.132-139
• /
• 2002

본 연구는 디젤의 오염기간 및 토성이 콤포스팅 처리효율에 미치는 영향을 살펴보고자 실시하였다. 오염경과기간은 15일과 60일로 하였으며 대조실험으로 오염직후의 토양실험도 실시하였다. 연구에 사용된 토양은 실트질양토와 사토이었으며 대상오염물질은 디젤오일이었다. 초기오염농도는 건조질량기준으로 약 10,000mgTPH/kg으로 하였으며, 수분은 각 토성의 수분보유능력의 70%로 조절하였다. 유기물질 보충 및 미생물식종의 목적으로 하수슬러지를 첨가하였으며 토양대 슬러지 혼합비율은 습윤질량비로 1:0.3이었다. 휘발된 TPH양은 초기농도의 0.9-1.8%정도로써 디젤오염토양의 콤포스팅 적용시 디젤은 주로 생물학적인 요인에 의하여 제거되었다. 휘발에 의하여 손실되는 n-alkanes들은 대부분 C10~C17의 성분들이었으며, 특히 C10~C14까지의 성분들이 C15 이상의 성분들보다 휘발이 많이 되었다. 사토의 TPH에 대한 1차반응 분해속도상수 k값은 0.081-0.094/day로 실트질양토의 0.056-0.061/day보다 약 1.5배 정도 높았다. 오염경과기간의 영향을 살펴보면, 60일까지의 오염경과기간으로는 TPH 분해효율의 뚜렷한 차이를 발견할 수 없었다. 이산화탄소회수율은 0.61-0.89이었으며, TPH분해량과 이산화탄소발생량과의 상관계수는 0.90-0.96의 범위에 있었다.