• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1077-1078
• /
• 2010

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.203-207
• /
• 2019

Calcium phosphates such as hydroxyapatite (HAp), tricalcium phosphate (${\beta}$-TCP), and biphasic calcium phosphate (BCP, HAp/${\beta}$-TCP) have been prepared via hydrothermal treatment. The synthesis was conducted by reacting ($Ca(OH)_2$) aqueous solution with phosphoric acid ($H_3PO_4$) under different hydrothermal synthesis conditions (temperatures up to $150^{\circ}C$ and pH lower than 12). The effects of initial precursor Ca/P ratio (1.30, 1.50 and 1.67) and post heat treatment on the phase evolution behavior of the powders and sintered ceramics were investigated. The phases of resulting powders and sintered ceramics were controllable by adjusting the initial Ca/P ratio. A single HAp phase without any noticeable second phase was obtained for the initial Ca/P ratio of 1.67 in the overall heat treatment range. Pure ${\beta}$-TCP and biphasic calcium phosphate (HAp/${\beta}$-TCP) were synthesized from precursor solutions having Ca/P molar ratios of 1.30 and 1.50, respectively, after having been heat treated at $900^{\circ}C$ or higher. Dense ceramics with translucency were obtained at considerably lower sintering temperatures.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.253-264
• /
• 2003

This paper presents the analytic model of Distributed Denial-of-Service (DDoS) attacks in two settings: the normal Web server without any attack and the Web server with DDoS attacks. In these settings, we measure TCP flag rate, which is expressed in terms of the ratio of the number of TCP flags, i.e., SYN, ACK, RST, etc., packets over the total number of TCP packets, and Protocol rate, which is defined by the ratio of the number of TCP (UDP or ICMP) packets over the total number of W packets. The experimental results show a distinctive and predictive pattern of DDoS attacks. We wish our approach can be used to detect and prevent DDoS attacks.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.787-798
• /
• 2004

High performance net재rking is one of key factors to provide support for data intensive applications in the Internet. Extended frame size has a major impact on end to-end performance with increasing effective TCP throughput and decreasing system overhead. Most of the research about extended frames has focused on local area network performance and the impact that extended frame size has on the system elements including memory, network interface card and so forth. In the paper, we analyse the effects of the extended frames to the other traffic flows sharing Internet paths for the wide area performance of TCP by conducting various network simulations. Results show that securing available bandwidth in no loss and low delay networks is indispensable to exploit the efficiency of extended frames.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.791-797
• /
• 2014

Abstract Scaffold used as a carrier of the cell has been actively conducted using plenty of technology in tissue engineering. ${\beta}$-tricalcium phosphate (${\beta}$-TCP) material has shown good biocompatibility and osteoconductive ability when it was implanted as a bone graft substitute in osseous defect in human and animal studies for bone regeneration. In this study, we fabricated the blended polycaprolactone (PCL) and ${\beta}$-TCP scaffold by the polymer deposition system (PDS). The PCL/${\beta}$-TCP scaffold was fabricated at a temperature of $110^{\circ}C$, pressure of 650 kPa, and scan velocity of 100 mm/sec. The Overall geometry and size of the scaffold were fixed circle type with a diameter of 10 mm and a height of 4 mm. PCL/${\beta}$-TCP scaffold was observed by scanning electron microscopy. Cell attachment and proliferation of the scaffold containing 30 wt% ${\beta}$-TCP was superior to those containing 10 wt% and 20 wt% ${\beta}$-TCP.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.590-596
• /
• 2018

To improve the injection behavior of brushite cement, dense ${\beta}-Ca_3(PO_4)_2$ (${\beta}-TCP$) granules were added to the starting material. The spherical ${\beta}-TCP$ granules prepared by spray-drying and subsequent sintering at $1000{\sim}1200^{\circ}C$ accounted for fractions of from 0.5 to 0.7 of the total ${\beta}-TCP$. The injection behavior was evaluated by measuring the injected mass divided by the loaded mass of paste in the syringe pump. The injected amount was increased with the increase in the fraction and sintering temperature of ${\beta}-TCP$ granules, except at $1200^{\circ}C$. The increase in the fraction of ${\beta}-TCP$ and its sintering temperature resulted in a decrease in the plastic limit, which is the volume of water required to liquefy the compact. The rest water could be utilized in the cement with the reduced plastic limit for improved injectability. The amounts of rest water assigned for powdery phase were estimated, and correlated with the injectability of paste.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.395-400
• /
• 2005

The IEEE 802.11b WLAN supports multiple transmission rates and the rate is chosen in an adaptive manner by an auto rate control algorithm. This auto rate control algorithm deeply affects the total system performance of the IEEE 802.11b WLAN. In this paper, we examine the WLAN performance with regard to the auto rate control algorithm especially the ARF scheme. The experimental results indicate that the ARF scheme works well in the face of signal noise due to node location. However, the ARF scheme severely degrades system performance when multiple nodes contend to obtain the wireless channel and the packet is lost due to signal collision. In addition, TCP prevent the performance degradation due to ARF scheme by retaining number of active nodes. However, some applications, such as transporting multimedia data, adopt the UDP. Therefore, the TCP cannot be an optimal solution for all WLAN applications.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.492-498
• /
• 2018

In this study, a sea shell was converted into bioceramic phases at three different sintering temperatures ($450^{\circ}C$, $850^{\circ}C$, $1000^{\circ}C$). Among the obtained bioceramic phases, a valuable ${\beta}-TCP$ was produced via mechanochemical conversion method from sea snail Turritella terebra at $1000^{\circ}C$ sintering temperature. For this reason, only the bioceramic sintered at $1000^{\circ}C$ was concentrated on and FT-IR, SEM/EDX, BET, XRD, ICP-OES analyses were carried out for the complete characterization of ${\beta}-TCP$ phase. Biodegradation test in Tris-buffer solution, bioactivity tests in simulated body fluid (SBF) and cell studies were conducted. Bioactivity test results were promising and high rate of cell viability was observed in MTT assay after 24 hours and 7 days incubation. Results demonstrated that the produced ${\beta}-TCP$ bioceramic is qualified for further consideration and experimentation with its features of pore size and ability to support bone tissue growth and cell proliferation. This study suggests an easy, economic method of nanobioceramic production.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.635-638
• /
• 2002

In this paper, the connection device of RS232C and TCP/IP implementation using ARM processor and LINUX is proposed. Data interaction flash memory the multiple serial ports are transferred to ARM processor and the data are processed and formed into data packet for transfer via internet protocol. Packet flash memory Internet is decoded to extract the serial port data. The serial ports supports RS232C asynchronous protocol communication and control program is developed in GNU-C and installed in the on-board memory for packet conversion and control. The research result can be applied to terminal server, printer server and multiple serial ports equipments.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.435-445
• /
• 2007

Snoop protocol is one of the efficient schemes to compensate TCP packet loss and enhance TCP throughput in wired-cum-wireless networks. However, Snoop protocol has a problem: it cannot perform local retransmission efficiently under the bursty-error prone wireless link. To solve this problem, SACK-Aware-Snoop and SNACK mechanism have been proposed. These approaches improve the performance by using SACK option field between base station and mobile host. However in the wireless channel with high packet loss rate, SACK-Aware-Snoop and SNACK mechanism do not work well because of two reason: (a) end-to-end performance is degraded because duplicate ACKs themself can be lost in the presence of bursty error, (b) energy of mobile device and bandwidth utilization in the wireless link are wasted unnecessarily because of SACK option field in the wireless link. In this paper, we propose a new local retransmission scheme based on Cross-layer approach, called Cross-layer Snoop(C-Snoop) protocol, to solve the limitation of previous localized link layer schemes. C-Snoop protocol includes caching lost TCP data and performing local retransmission based on a few policies dealing with MAC-layer's timeout and local retransmission timeout. From the simulation result, we could see more improved TCP throughput and energy efficiency than previous mechanisms.