• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.892-894
• /
• 2008

During dongchimi fermentation at 5 and $25^{\circ}C$, the pH lowered slowly and reached 4.03 at $5^{\circ}C$ after 30 days, whereas it lowered dramatically and reached 3.59 at $25^{\circ}C$ after 2 days. The predominant bacteria were Leuconostoc (Leu.) mesenteroides at $25^{\circ}C$ until day 2 which changed into Lactobacillus (Lb.) plantarum at day 3, analyzed by a culture dependent method with partial 16S rRNA gene sequencing, whereas Leu. mesenteroides occupied predominantly at $5^{\circ}C$ until day 7. In a culture-independent method using a polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) with partial 16S rRNA gene sequencing, Lb. algidus was predominant at $5^{\circ}C$ until day 7 and Lb. plantarum occupied predominantly at $25^{\circ}C$ until day 3, which is different from the results of the culture based method, indicating the both methods need to be combined for accuracy. Based on the culture-dependent method, Leu. mesenteroides might be responsible for the early and mid-phase of dongchimi fermentation.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.990-991
• /
• 2015

To drive a magnetron injection gun, thsi paper decribes a design, fabrication and analysis results of proposed compact capacitor charging power supply (CCPS) formed resonant full-bridge inverter for electron gun power supply (EGPS). EGPS needs the -40 kV output voltage and 280 kW output power for few seconds continuously and have to be designed for the rise and fall time to be less than 1 ms with the ripple stability of output voltage of lower than 1%. In order to meet the requirements, we used eight resonant full-bridge modules operated in parallel. Each resonant full-bridge module can supply the current of 0.9 A and the voltage of 40 kV, and is operated by N-phase shift switching pattern. In this paper, we present the design, simulation and test results of interleaved CCPS.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1781-1784
• /
• 2003

Determination of Co(II) ion as a 4-(2-thiazolylazo)resorcinol(TAR) or 5-methyl-4-(2-thiazolylazo)resorcinol(5MTAR) chelate was accomplished by reversed-phase capillary high-performance liquid chromatography (RP-Capillary-HPLC) using a Vydac $C_4$ column and MeCN-water mixture as mobile phase. The effect of change in pH and MeCN percentage of the mobile phase on the retention factor, k and peak intensity were evaluated. It was found that 30% MeCN (v/v) of pH 5.60 or 7.20 was adequate as mobile phase when TAR or 5MTAR is used. Detection limit (D.L., S/N=3) in each case was $2.0\;{\times}\;10^{-7}$M (11.8 ppb) and $3.0\;{\times}\;10^{-7}$ M (17.7 ppb). The Co(II) ion in mineral and waste water was determined with the optimum column and mobile phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.85-88
• /
• 2003

In this study, porcelain insulator samples which have a different alumina composition were manufactured in order to test electrical and mechanical properties and make an analysis of the propagation phenomena of micro cracks on porcelain body. From XRD quantitative analysis the crystalline phases were different with alumina composition, sample C and D which have about 17wt% Corundum phase without the Cristobalite phase shows better electrical and mechanical properties than sample A and 8 which have the Cristobalite phase. In dielectrics test on porcelain samples with below 17wt% alumina composition, it was found that the amount of glass phase$(SiO_2)$have an main effect to decrease the dielectric loss$(tan{\delta})$, and the dielectric breakdown voltage of aluminous porcelain insulators was largely affected by its relative density. As a micro cracks analysis, HRS were measured, then the intensity of HRS increased with the amount of alumina composition. On the other hand, the propagation behaviors of cracks was fairly influenced by the distribution of pores.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.354-357
• /
• 2005

When Ti-6Al-4V is used in long steam turbine blades, the main issues are how to improve the fatigue strength as a problem of internal quality and how to forge the thinnest possible blades as problem of dimensional precision. To assure an excellent fatigue strength, it is important to make the two phase fine and equiaxial structure by providing enough plastic deformation in the two phase$(\alpha\;phase/\beta\;phase)$ temperature region. Accordingly, it needs to predict that forging temperature, preform design and forging velocity in forging process. To achieve this end, the two steps forging process was suggested to forge the thin and twisted blades with a precision hammer considering die forces and metal flow. Two steps forging process consists of the flattening forging process and finishing forging process. Process in forging of a 1016mm long steam turbine blade is designed by the finite element method. This study attempts to derive systematic design procedures for process design in the forging. Forging parameters was analyzed in two-dimensional plane-strain simulation and two steps forging process carried out in three-dimensional simulation. Consequently, optimal forging process parameters of long steam turbine blades in Ti-6Al-4V with a high dimensional precision are selected in the hammer die forging.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.815-816
• /
• 2010

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.109-110
• /
• 2012

본 논문에서는 불평형 전원 전압 하에서 삼상 PWM 컨버터의 전류 보상 기법을 제안하였다. 전원 전압이 불평형인 경우 PLL(Phase Locked Loop)를 이용하여 추출한 위상각에는 왜곡 성분이 포함된다. 이러한 왜곡된 위상각으로 컨버터를 제어하는 경우 입력 전류에도 고조파가 포함되게 된다. 본 논문에서는 불평형 전원 전압 하에서도 입력 전류의 THD(Total Harmonic Distortion)를 IEEE Std. 519 규정인 5% 이내로 제한할 수 있도록 하는 전류 보상 기법을 제안하였다. 제안된 기법은 시뮬레이션을 통해 그 타당성을 검증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.673-674
• /
• 2008

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.139-141
• /
• 2008

In this paper, the authors study the boost converter as a DC-DC converter like a Power supply and describe the investigation result about the two phase with interleaved boost converter which has the same effect that the switching frequency of the solid-state-switch is two times. As a result, the ripple of the input current and output current is better improved.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1586-1588
• /
• 1998

To use the EMTP, in this paper, a arcing horn is simulated by non-linear resistor and inductor element using TACS, a tower by distributed parameter model, and lines as K. C. Lee model. Changing lightning current characteristics, lightning position, and tower footing resistor value, we analysis multi-phase flashover characteristics in 765 kV transmission line.