• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.201-208
• /
• 2004

Response characteristics of the CVT system for a parallel hybrid electric vehicle (HEV) are investigated. From the experiment, CVT ratio control algorithm for the optimal engine operation is obtained. To investigate the effect of the CVT system dynamic characteristics on the HEV performance, a hardware in the loop simulation (HILS) is performed. In the HILS, hardwares of the CVT belt-pulley and hydraulic control valves are used. It is found that the engine performance by the open loop CVT ratio control shows some deviation from the OOL in spite of the RCVs open loop control ability. To improve the engine performance, a closed loop control of the CVT ratio is proposed with variable control gains depending on the shift direction and the CVT speed ratio range by considering the nonlinear characteristics of the RCV and CVT belt-pulley dynamics. The HILS results show that the engine performance is improved by the closed loop control showing the operation trajectory close to the OOL.

• 한국식품영양학회지
• /
• 제22권3호
• /
• pp.377-386
• /
• 2009

The principal objective of this study was to evaluate the influence of temperature and salt concentration on the physicochemical properties of salted Chinese cabbage. Salted Chinese cabbage samples were prepared with various concentrations of salt(4, 5, 6 and 7%), and were stored for 10 days at three temperatures(8, 14, and $25^{\circ}C$). The salting ratio of Chinese cabbage evidenced a decreasing trend regardless of the salting temperature and salt concentration, and their decrement appeared relatively high as the salting temperature increased. The period required to achieve a critical salting ratio(85%) decreased with increases in the salt concentration at $25^{\circ}C$, and a similar trend was observed at lower temperatures(8 and $14^{\circ}C$). The salinity of all samples evidenced an increasing trend during the salting period, and at $25^{\circ}C$, in particular, a continuous increment was observed. At salt concentrations of 4%, the critical salinity(2.2%) was not achieved regardless of the temperature and salting period. The pH of salted Chinese cabbage achieved critical pH in 3 days at a salting temperature of $25^{\circ}C$, but the critical pH 5.5 of samples at 8 and $14^{\circ}C$ appeared after a long period of approximately 4 to 10 days. The average hardness values of salted Chinese cabbage at a salting ratio of 85% were approximately 1.49 MPa, 1.87 MPa, and 1.97 MPa, respectively, at three temperatures($25^{\circ}C$, $14^{\circ}C$, and $8^{\circ}C$). The initial reducing sugar content of cabbage juice was 11.8 mg/$m{\ell}$, and this value decreased substantially to 3 to 5 mg/$m{\ell}$ on day 1.

• 대한화학회지
• /
• 제7권4호
• /
• pp.283-287
• /
• 1963

$H_2O$-chloroform系에서의 hydrogen cupferrate의 分配係數와 水溶液相의 pH, 이온强度 및 cupferron의 濃度와의 關係를 살폈는데, 分配係數는 pH(1.50∼3.00사이)와 이온强度(0.1∼2.0사이)에는 無關하지만 cupferron의 濃度가 커질수록 分配係數는 增加했으며, 熱力學的인 分配係數의 完全한 값으로 120.0이란 새로운 값을 얻었다. 한편 cupferron의 濃度가 커짐에 따라 分配係數가 增加하는 까닭은 chloroform相에 monomer로서의 HCup. 의 活動度의 감소로 간주하고, chloroform相에서의 HCup. 의 濃度와 chloroform相에서의 HCup. 의 活動度係數와의 關係를 表示하는 實驗式 $-logf_{CHCl3}=0.1285C_{CHCl3}+{7.775C^2}_{CHCl3}$를 얻었으며, 이 式은 HCup. 의 chloroform 溶液 0.1mole/l order 以下의 濃度에서 大端히 잘 맞는다.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1037-1041
• /
• 2001

저온(32$0^{\circ}C$)에서 SiH$_4$와 $N_2$O 가스의 혼합을 통해 플라즈마화학기상증착(PECVD)법을 이용하여 실리카 광도파로의 클래딩막으로 사용되는 SiO$_2$후막을 제조하였다. 증착변수가 SiO$_2$후막의 특성에 미치는 영향을 살펴보기 위해 $N_2$O/SiH$_4$flow ratio와 RF power에 변화를 주었다. $N_2$O/SiH$_4$ flow ratio가 감소함에 따라 증착속도는 2.9 $mu extrm{m}$/h), 굴절률은 thermal oxide의 굴절률(n=1.46)에 근접하였다.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.376-381
• /
• 1998

The large scaled field test by prefabricated vertical drains was performed to evaluate the superiority of vertical discharge capacity for drain materials through compare and analyze the time-settlement behavior with drain spacing and the compression index and consolidation coefficient obtained by laboratory experiments and field monitoring system 1. The relation of measurement settlement( $S_{m}$) versus design settlement( $S_{t}$) and measurement consolidation ratio( $U_{m}$) versus design consolidation ratio( $U_{t}$) were shown $S_{m}$=(1.0~l.1) $S_{t}$, $U_{m}$=(1.13~l.17) $U_{t}$, at 1.0m drain spacing and $S_{m}$=(0.7~0.8) $S_{t}$, $U_{m}$=(0.92~0.99) $U_{t}$ at 1.5m drain spacing, respectively. 2. The relation of field compression index( $C_{cfield}$) and virgin compression index( $V_{cclab}$) was shown $C_{cfield}$=(1.0~1.2) $V_{cclab}$, But it was nearly same value when considered the error with determination method of virgin compression index and prediction method of total settlement. 3. field consolidation coefficient was larger than laboratory consolidation coefficient, and the consolidation coefficient ratio( $C_{h}$/ $C_{v}$) were $C_{h}$=(2.4 ~ 3.0) $C_{v}$. $C_{h}$=(3.5 ~ 4.3) $C_{v}$ at 1.0m and 1.5m drain spacing and increased with increasing of drain spacingngasing of drain spacingng spacingng

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.21-28
• /
• 2007

탄화온도에 따른 목탄의 pH, 원소함량비와 목탄 표면의 FT-IR 변화를 분석하기 위하여 잣나무 목탄이 사용되었다. 300, $400^{\circ}C$의 탄화온도에서 제조된 잣나무 목탄의 pH는 각각 5.27, 6.80로 측정된 반면, $500{\sim}900^{\circ}C$에서 제조된 시료의 pH는 크게 높아져 9.25~10.35로 나타났다. 탄화 온도의 차이에 따른 목탄의 원소 조성비 변화에 있어서는, 고온 탄화 목탄일수록 C 함유율이 높아지고 상대적으로 O, H의 함유율은 낮아졌다. 가장 큰 원소 조성비 변화 폭은 400와 $500^{\circ}C$의 탄화 온도에서 측정되었다. 300, $400^{\circ}C$에서 제조된 목탄의 C, O, H 원소함량비는 각긱 67.7, 28.9, 3.0%와 72.2, 24.9, 2.5%로 측정된 반면, $500{\sim}900^{\circ}C$ 사이에서 제조된 목탄의 C, O, H 함량비는 각각 83.3~90.5%, 13.6~9.0%, 2.7~0.3% 사이로 나타났다. FT-IR에 의한 목탄 표면 관능기 분석은 탄화 전 목분과 각각 $300{\sim}900^{\circ}C$ 사이의 온도에서 제조된 목탄의 IR-스펙트럼 비교로 이루어졌다. 300와 $400^{\circ}C$에서 탄화된 목탄의 표면에는 Lactone, Lactol, Carboxylic acid, Carboxylic anhydride 등의 산성 관능기들을 많이 포함하는 것으로 유추되는 반면, $500^{\circ}C$ 이상의 온도에서 탄화된 목탄의 경우에는 Pyrone 계토의 관능기를 많이 포함하는 것으로 판단된다.

• 대한화학회지
• /
• 제17권3호
• /
• pp.169-173
• /
• 1973

세자리 schiff base리간드로서 salicylidene amino-o-hydroxy benzene 은 salicylaldehyde와 o-amino phenol로서 합성하였으며 이 세자리 schiff base 리간드와 Mo(VI), Mo(V), Mo(IV) 및 Mo(III) 의 과산화상태의 몰리브덴 착물들의 반응으로 새로운 착물[Mo O$_2(H_2O)\;(C_{13}H_9O_2N)]$, [MoO Cl(H$_2O)(C_13H_9O_2N)]$, $[Mo(SCN)_2(H_2O)(C_{13}H_9O2_N)]$ 및 $[Mo(H_2O)_2 (C_{13}H_9O_2N)]_2O$들을 얻었다. 이들 착물에서 Mo(VI), Mo(V) 및 Mo(IV)착물들은 리간드와 몰리브덴의 mole비가 1:1인 착물로서 몰리브덴 이온은 6배위 팔면체로서 주어지나 Mo(III) 착물은 Mo-O-Mo의 산소 bridge bond를 갖는 poly nuclear 착물로서 mole비 1:1인 착물로 주어짐을 원소분석치와 자외선흡광도 및 적외선 spectra의 고찰로서 알아보았다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.995-998
• /
• 2003

This paper reports the correlation between dielectric constant and degree of amorphism of the hybrid type Si-O-C thin films. Si-O-C thin films were deposited by high density plasma chemical vapor deposition using bistrimethyl- silylmethane(BTMSM, $H_{9}$C$_3$-Si-C $H_2$-Si-C$_3$ $H_{9}$) and oxygen precursors with various flow rate ratio. As-deposited film and annealed films at 40$0^{\circ}C$ were analyzed by XRD. The Si-O-C thin films were amorphous from XRD patterns. For quantitative analysis, the diffraction pattern of the samples was transformed to radial distribution function by Fourier analysis, and then compared with each other. The degree of amorphism of annealed films was higher than that of as-deposited ones. The dielectric constant varied in accordance with flow rate ratio of precursors. The lowest dielectric constant was obtained from the as-deposited film which has the highest degree of amorphism after annealing.

• 한국자기학회지
• /
• 제9권5호
• /
• pp.234-238
• /
• 1999

각종 microwave용 통신기기 소자 및 고주파용 memory 소자로 사용하기 위해서 각형비가 크고 보자력이 작은 lithium ferrite를 개발하고 물리적인 특성을 조사하기 위하여 Li0.48-0.5xBi0.02Ni0.04ZnxFe2.46-0.5xO4의 조성식을 갖는 시편을 제조하였다. ZnO을 첨가하여 변화시킴에 따라 잔류자기(Bm)가 증가하고 보자력(Hc)이 낮아졌으나 각형비 R은 감소하였다. 105$0^{\circ}C$에서 소결한 시편의 경우 R=0.82, Hc=1.8Oe로 나타났고 110$0^{\circ}C$에서 소결한 시편의 경우 R=0.75 및 Hc=1.70Oe인 값을 얻었다. Tc는 463$^{\circ}C$로 측정되었고 주변온도 변화에 대한 Br값의 변화가 매우 안정된 0.09~0.11 값으로 나타났다.