• 대한방사성의약품학회지
• /
• 제4권1호
• /
• pp.11-15
• /
• 2018

Electrophilic fluorinating reagents are typically efficient for carbon-fluorine (C-F) bonds formation due to their higher reactivity even under mild condition. Thus, they have been playing an important role to improve C-F bonds formation reactions via direct fluorination reaction with electrophilic fluorinating reagents or transition metal catalysis. Advances on the recent fluorination methods are mainly results of $Selectfluor^{TM}$'s capability on facile fluorination. In this mini-review, we describe synthesis and application of four old yet popular electrophilic fluorinating reagents such as N-fluorobenzenesulfonimide (NFSI), N-fluoropyridinium salts, $Selectfluor^{TM}$, and N-fluorosultam.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.106-110
• /
• 2006

Photocatalytic electron transfer reactions of aryl benzyl sulfides using 2,4,6 triphenylpyrilium tetrafluoroborate ($TP^+BF_4^-$) resulted in the oxidation of these sulfides to the corresponding sulfoxides and also in most cases in the C-S bond cleavage of them along with formation of aromatic aldehydes. In these reactions, the formation of sulfide radical cation has been proposed, which undergoes either oxidation to the corresponding sulfoxide or C-S bond cleavage to the formation of aromatic aldehydes. The further oxidation of sulfoxides to sulfones has not been observed. The influence of substrate structures on the reaction pathways as well as the role of $O_2$ in this respect is discussed.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1043-1049
• /
• 2014

Density functional theory (DFT) calculations at the B3LYP/6-31G(d,p) theoretical level were performed for two novel explosives (compounds B and C) based on the guanidine-fused bicyclic skeleton $C_4N_6H_8$ (A). The heats of formation (HOFs) were calculated via isodesmic reaction. The detonation properties were evaluated by using the Kamlet-Jacobs equations. The bond dissociation energies (BDEs) for the thermolysis initiation bond were also analyzed to investigate the thermal stability. The results show that the compounds have high positive HOF values (B, 1064.68 $kJ{\cdot}mol^{-1}$; C, 724.02 $kJ{\cdot}mol^{-1}$), high detonation properties (${\rho}$, D and P values of 2.04 $g{\cdot}cm^{-3}$ and 2.21 $g{\cdot}cm^{-3}$, 9.98 $km{\cdot}s^{-1}$ and 10.99 $km{\cdot}s^{-1}$, 46.44 GPa and 59.91 Gpa, respectively) and meet the basic stability requirement. Additionally, feasible synthetic routes of the these high energy density compounds (HEDCs) were also proposed via retrosynthetic analysis.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.191-196
• /
• 2019

This study assessed the feasibility of a Ti₃AlC₂ MAX phase as an Al-source for the formation of a mullite bond in the fabrication of porous SiC tubes with high strength. The as-received Ti₃AlC₂ was partially oxidized at 1200℃ for 30 min before using to minimize the abrupt volume expansion caused by oxidation during sintering. Thermal treatment at 1100-1400℃ for 3 h in air led to the formation of Al₂O₃ by the decomposition of Ti₃AlC₂, which reacted further with oxidation-derived SiO₂ on the SiC surface to form a mullite phase. The fabricated porous SiC tubes with a relative density of 48 - 62 % exhibited mechanical strengths of 80 - 200 MPa, which were much higher than those with the Al₂O₃ filler material. The high mechanical strength of the Ti₃AlC₂-added porous SiC was explained by the rigid mullite neck formation along with the retained Ti₃AlC₂ with good mechanical properties.

• Carbon letters
• /
• 제2권1호
• /
• pp.22-26
• /
• 2001

Na alloyed graphite intercalation compounds with stage 1 and 2 were synthesized using the high temperature and pressure technique. Thermal stability and staging transitions of the compounds were investigated depending on heating rates. The thermal stability and temperature dependence of the deintercalation compounds were characterized using differential scanning calorimeter (DSC) analyzer. Enthalpy of formations were confirmed at temperatures between 25 and $500^{\circ}C$, depending on the various heating rates. The structure ions and interlayer spaces of the graphite were identified by X-ray diffraction (XRD). Diffractograms of stages with non-integral (00l) values were obtained in the thermal decomposition process, and stacking disorder defects and random stage modes were observed. The average value of the interlayer C-C bond lengths were found approximately $2.12{\AA}$ and $1.23{\AA}$ from the diffractions. Based on the stage transition, the degree of the deintercalaton has a inverse-linear relationship against the heating rate.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.70-79
• /
• 1990

Stainless clad steels were made through hot rolling process. Backing plates employed in this study were HSLA steel and mild steel. The shear bond strength increased with an increase of the soaking temperature and time. It was also found that the shear bond strength increased with an increase of the reduction ratio. The threshold deformation was observed to be 20% and 10% respectively when the soaking conditions of 15 min. at 900.deg. C and 30 min. at 1000.deg. C were applied. Either the rolling or the transverse direction did not give any significant difference in the shear bond strength. Stainless steel-HSLA steel was superior to stainless steel-mild steel in the same range of magnitude. Because the above experimental results were in contrary to the existing mechanisms, the new model was proposed to describe the bonding mechanism and the void formation.

• 대한화학회지
• /
• 제17권4호
• /
• pp.247-255
• /
• 1973

$Li^{+},\;Na^{+},\;K^{+}, Ca^{2+},\;Ni^{2+},\;Al^{3+}$, 과 $F^{3+}$의 陽이온을 포화시킨 Wyoning montmorillonite에 acetone, methyl-ethyl ketone. diethyl ketone을 加熱用 i.r. gas cell 內에서 各各 다른 壓力아래 吸着시켜 $4000{\sim}1200cm^{-1}$에서spectra를 얻었다.두가지 형태의 C=O결합변화가$1713cm^{-1}$과 $1690cm^{-1}$ 나타났으며 이들은 陽이온의 水酸基 및 吸着水와 그리고 表面水酸基와 水素結合을 일으키는 결과로 나타났다. OH 吸收 spectra의 强度는 陽이온의 水酸基의 resonance 理論을 뒷받침해 주었다. coordinate bond를 일으키는 경향은 計算한 C=O기의 酸素의 formal charge의 크기와 잘 맞았다.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.376-380
• /
• 1987

The cyclobutane forming photocycloaddition reaction of 5(E)-styryl-1,3-dimethyluracil with some olefins occurs on the 5,6-double bond of uracil ring rather than the expected central double bond via an intermediate, probably the photochemical Diels-Alder type adduct. This intermediate formed on short term irradiation of 5(E)-styryl-1,3-dimethyluracil and 2,3-dimethyl-2-butene solution is converted into the $C_4$-cycloadduct on the prolonged irradiation. Quantum yield of the intermediate formation is not linear with the concentration of 2,3-dimethyl-2-butene probably due to the secondary reaction accompanied with the complex reaction kinetics. The intermediate is formed from the lowest excited singlet state.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1314-1319
• /
• 1998

Electronic structures and properties of the organometallic precursors [Me2AlNHR]2 (R =Me, iPr, and tBu) have been calculated by the semiempirical (ASED-MO, MNDO, AM1 and PM3) methods. Optimized structures obtained from the MNDO, AM1, and PM3 calculations indicate that the N-C bond lengths are considerably affected by the change of the R groups bonded to nitrogen, but the bond lengths of the Al-N and Al-C bonds are little affected. This result is useful in explaining the experimental results for the elimination of the R groups bonded to nitrogen, and could serve as a guide in designing an optimum precursor for the AlN thin film formation.

• 한국연소학회지
• /
• 제14권1호
• /
• pp.9-18
• /
• 2009

The NOx emission characteristics of DME in counterflow nonpremixed flames were investigated numerically, and brief experiments were carried out to compare the flame shapes and NOx emissions with those of $C_{3}H_{8}$ and $C_{2}H_{6}$. The DME flames were calculated using Kaiser's mechanism, while the $C_{2}H_{6}$ flames were calculated using the $C_3$ mechanism. These mechanisms were combined with the modified Miller-Bowman mechanism for the analysis of NOx. Experimental results show that DME flame has the characteristics of partial premixed flame and the flame length becomes very shorter compared with general hydrocarbon fuels and then, the NOx emission of DME is low as much as 60 % of $C_{3}H_{8}$. In the calculated results of counterflow nonpremixed flames, the $EI_{NO}$ of DME nonpremixed flame is low as much as 50 % of the $C_{2}H_{6}$ nonpremixed flame. The cause of $EI_{NO}$ reduction is attributed mainly to the characteristics of partial premixed flame due to the existence of O atom in DME and partly to the O-C bond in DME, instead of C-C bond in hydrocarbon fuels.