• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.393-402
• /
• 2007

Polyaluminocarbosilane was synthesized by direct reaction of polydimethylsilane with aluminum(III)-acetylacetonate in the presence of zeolite catalyst. A fraction of higher molecular weight polycarbosilane was formed due to the binding of aluminium acetylacetonate radicals with the polycarbosilane backbone. Small amount of Si-O-Si bond was observed in the as-prepared polyaluminocarbosilane as the result. Polyaluminocarbosilane fiber was obtained through a melt spinning and was pyrolyzed and sintered into SiC fiber from $1200{\sim}2000^{\circ}C$ under a controlled atmosphere. The nucleation and growth of ${\beta}-SiC$ grains between $1400{\sim}1600^{\circ}C$ are accompanied with nano pores formation and residual carbon generation. Above $1800^{\circ}C$, SiC fiber could be sintered to give a fully crystallized ${\beta}-SiC$ with some ${\alpha}-SiC$.

• Journal of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.15-22
• /
• 1985

Kinetic studies of nucleophilic substitution reaction of substituted benzoyl cyanides and benzoyl chlorides with pyridines were conducted at 25$^{\circ}C$ in pure acetone solvent. Results showed that (ⅰ) magnitudes of $_{\rho}_S$, $_{\rho}_N$ and ${\beta}$ associated with a change of substituent in the nucleophile indicate relatively advanced bond-formation in the transition state, (ⅱ) the potential energy surface model is able to predict the reaction mechanism, but it is unable to predict the transition state variation to a more product-like transition state, where bond-formation is much more progressed than bond breaking, upon changing the leaving group to that with better leaving ability (ⅲ) the quantum mechanical model predicted the product-like transition state and slightly better leaving ability of CN- as compared with Cl-.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.564-570
• /
• 2012

s-Tetrazine is the essential candidate of many energetic compounds due to its high nitrogen content, enthalpy of formation and thermal stability. The present study explores the design of s-tetrazine derivatives in which different $-NO_2$, $-NH_2$ and $-N_3$ substituted azoles are attached to the tetrazine ring via C-N linkage. The density functional theory (DFT) is used to predict the geometries, heats of formation (HOFs) and other energetic properties. The predicted results show that azide group plays a very important role in increasing HOF values of the s-tetrazine derivatives. The densities for designed molecules were predicted by using the crystal packing calculations. The introduction of $-NO_2$ group improves the density as compared to $-N_3$, and $-NH_2$ groups and hence the detonation performance. Bond dissociation energy analysis and insensitivity correlations revealed that amino derivatives are better candidates considering insensitivity and stability.

• Journal of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.180-188
• /
• 1974

Adsorption mechanism of alkyl aldehydes, acetaldehyde, acrolein, and crotonaldehyde on cations supported by layer silicates was studied by means of IR spectroscopy and X-ray. An analysis of four characteristic split bands in the region of $1720∼1580㎝^{-1}$ was made. The carbonyl stretching band which shifted about $130㎝^{-1}$ to lower frequencies was observed only for $Ni^{2+}$ and Al^{3+}$ but slightly with $Ca^{2+}$ at high sample temperature and was attributed to >C=O…M complex formation. A sharp band which appeared as a shoulder at 1722 for acetaldehyde and 1690 for acrolein and crotonaldehyde was responsible for the interaction of carbonyl with surface hydroxyl. The second broad band which appeared at about 1710~1660 was responsible for hydrogen bonding between carbonyl oxygen and cationic hydroxyl group. The third band which appeared at about 1640~1660 was attributed to induced >C=C< double bond due to the strong carbonyl interaction. This was supported by the interlamellar spacings obtained by X-ray diffractometry.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.2
• /
• pp.71-75
• /
• 1981

Vacuum ultraviolet photolysis of ethyl bromide was studied at 104.8-106.7 nm (11.4-11.6 eV) in the pressure range of 0.2-18.6 torr at $25^{\circ}$ using an argon resonance lamp with and without additives, i.e., NO and He. Since the ionization potential of $CH_3CH_2Br$ is lower than the photon energy, the competitive processes between the photoionization and the photodecomposition were also investigated. The observations indicated that 50% of absorbed light leads to the former process and the rest to the latter one. In the absence of NO the principal reaction products for the latter process were found to be $CH_4, C_2H_2, C_2H_4, C_2H_6, and C_3H_8$. The product quantum yields of these reaction products showed two strikingly different phenomena with an increase in reactant pressure. The major products, $C_2H_4$ and $C_2H_6$, showed positive effects with pressure whereas the effects on minor products were negative in both cases, i.e., He and reactant pressures. Addition of NO completely suppresses the formation of all products except $C_2H_4$ and reduces the $C_2H_4$ quantum yield. These observations are interpreted in view of existence of two different electronically excited states. The initial formation of short-lived Rydberg transition state undergoes HBr molecular elimination and this state can across over by collisional induction to a second excited state which decomposes exclusively by carbon-bromine bond fission. The estimated lifetime of the initial excited state was ${\sim}4{\times}10^{-10}$ sec. The extinction coefficient for $CH_3CH_2Br$ at 104.8-106.7 nm and $25{\circ}$ was determined to be ${varepsilon} = (1/PL)ln(I_0/I_t) = 2061{\pm}160atm^{-1}cm6{-1}$ with 95% confidence level.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.58-63
• /
• 2009

Silicon carbide (SiC) has been used for many engineering applications because of their high strength at high temperatures and high resistances to chemical degradation. SiC is very useful especially for a glass lens mold whose components demanded to the machining with good surface finish and low surface damage. The performance and reliability of optical components are strongly influenced by the surface damage of SiC during grinding process. Therefore, the severe process condition optimization shall be necessary for the highly qualified SiC glass lens mold. Usually the major form of damage in grinding of SiC is a crack occurs at surface and subsurface. The energy introduced in the layers close to the surface leads to the formation of these cracks. The experimental studies have been carried out to get optimum conditions for grinding of silicon carbide. To get the required qualified surface finish in grinding of SiC, the selection of type of the wheel is also important. Grinding processes of sintered SiC work-pieces is carried out with varying wheel type, depth of cut and feed using diamond wheel. The machining result of the surface roughness and the number of flaws, have been analyzed by use of surface profilers and SEM.

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.566-576
• /
• 2005

This paper describes an ab Initio study on interface energies, misfit strain energies, and electron structures at coherent interfaces Fe(bcc structure)/MCs(NaCl structure M=Ti, Zr, Hf). The interface energies at relaxed interfaces Fe/TiC, Fe/ZrC and Fe/HfC were 0.263, 0.153 and $0.271 J/m^2$, respectively. It was understood that the dependence of interface energy on the type of carbide was closely related to changes of the binding energies between Fe, M and C atoms before and after formation of the interfaces Fe/MCs with the help of the DLP/NNBB (Discrete Lattice Plane/ Nearest Neighbour Broken Bond) model and data of the electron structures. The misfit strain energies in Fe/TiC, Fe/ZrC and Fe/HfC systems were 0.390, 1.692 and 1.408 eV per 16 atoms(Fe: 8 atoms and MC; 8 atoms). More misfit energy was generated as difference of lattice parameters between the bulk Fe and the bulk MCs increased.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1101-1108
• /
• 2008

Geldanamycin and its analogs are important anticancer agents that inhibit the newly targeted heat-shock protein (Hsp) 90, which is a chaperone protein in eukaryotic cells. To resolve which geldanamycin biosynthetic genes are responsible for particular post-polyketide synthase (PKS) processing steps and in which order the reactions occur, we individually inactivated candidate genes in Streptomyces hygroscopicus subsp. duamyceticus JCM4427 and isolated and elucidated the structures of intermediates from each mutant. The results indicated that gel7 governs at least one of the benzoquinone ring oxidation steps. The gel16 was found to be involved in double-bond formation between C-4 and C-5 of 4,5-dihydrogeldanamycin, which confirmed our previous findings that this double bond is reduced during the post-PKS modification of the polyketide assembly. In addition, pro-geldanamycin, which does not possess a double bond at C-4/5, was purified from the gel7 and gel8 double-gene-inactivated mutant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.219-219
• /
• 2012

The formation and thermal desorption behaviors of octanethiol (OT) SAMs on single crystalline Au (111) and polycrystalline Au, Ag, and Cu substrates were examined by X-ray photoelectron microscopy (XPS), thermal desorption spectroscopy (TDS), and contact angle (CA) measurements. XPS and CA measurements revealed that the adsorption of octanethiol (OT) molecules on these metals led to the formation of chemisorbed self-assembled monolayers (SAMs). Three main desorption fragments for dioctyl disulfide (C8SSC8+, dimer), octanethiolate (C8S+), and octanethiol (C8SH+) were monitored using TDS to understand the effects of surface morphology and the nature of metal substrates on the thermal desorption behavior of alkanethiols. TDS measurements showed that a sharp dimer peak with a very strong intensity on single crystalline Au (111) surface was dominantly observed at 370 K, whereas a broad peak on the polycrystalline Au surface was observed at 405 K. On the other hand, desorption behaviors of octanethiolates and octanethiols were quite similar. We concluded that substrate morphology strongly affects the dimerization process of alkanethiolates on Au surfaces. We also found that desorption intensity of the dimer is in the order of Au＞＞Ag＞Cu, suggesting that the dimerization process occurs efficiently when the sulfur-metal bond has a more covalent character (Au) rather than an ionic character (Ag and Cu).

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1195-1198
• /
• 2008

Kinetic studies of the additions of benzylamines to a noncyclic dicarbonyl group activated olefin, methyl $\alpha$-acetyl-$\beta$ -phenylacrylates (MAP), in acetonitrile at 30.0 ${^{\circ}C}$ are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the $C_\alpha$ -N and $C_\beta$ -H bonds through a four-center hydrogen bonded transition state. The kinetic isotope effects ($k_H/k_D$ > 1.0) measured with deuterated benzylamines ($XC_6H_4CH_2ND_2$) increase with a stronger electron acceptor substituent ($\delta\sigma$ X > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4). The sign and magnitude of the cross-interaction constant, ρXY, is comparable to those for the normal bond formation processes in the $S_N2$ and addition reactions. The relatively low ${\Delta}H^\neq$ and large negative ${\Delta}S^\neq$ values are also consistent with the mechanism proposed.