• Journal of the East Asian Society of Dietary Life
• /
• v.6 no.1
• /
• pp.59-68
• /
• 1996

The present study undertaken to investigate the interrelationship among their regular dietary fatty acid intake, body fat content(BFC), and plasma lipid fractions(PLF) of middle-aged Korean women. Forty-nine women (age 30 to 49) participated in this study in which the aim was to determine their total nutrient intake per day, BFC and PLF, and to analyse the intercorrelations of these. Strong correlation was seen among their body mass index, mid-upper-arm-circumference, and BFC which were positively correlated with plasma total lipids(TL) and triglycerides(TG). Dietary myristic acid and lauric acid were positively correlated with both total cholesterol(TC) and LDL-cholesterol (LDL-C) in plasma. Palmitic acid, stearic acid, oleic acid, and total monounsaturated fatty acid(MUFA) were negatively correlated with HDL-cholesterol(HDL-C). Although dietary total saturated fatty acid (SFA) was not correlated with TC and LDL-C, it was positively correlated with TL and TG in plasma. However, dieary n-3 polyunsaturated fatty acid(PUFA) in regular Korean diet was not correlated with any of lipid fractions in plasma which might be due to the high ratio of n-6/n-3 in their diet. From the above results, it was concluded that plasma lipid fractions were modulated by their dietary nutrients, especially the types of the fatty acids. Dietary SFA and MUFA intake not PUFA are strongly correlated with LDL-C and HDL-C in the Korean diet This may relate to the frequency of coronary heart disease in the age group.

• Fashion & Textile Research Journal
• /
• v.1 no.1
• /
• pp.43-49
• /
• 1999

This study conducted 4 different kinds of underwear materials, which were A (Cotton 100%), B (Wool 100%), C (Cotton/Wool, 50/50%) and D (Acrylic/Cotton, 50/50%) and were done in a climate chamber under cold ambient $10{\pm}1^{\circ}C$, $40{\pm}5%RH$ by 6 male subjects who were in good health. Physiological parameters such as rectal and local skin temperature(forehead, forearm, hand, trunk, thigh, leg, foot, back and chest), heart rate, body weight loss, clothing microclimate, blood lactic acid concentration, and wearing sensation were measured. Started with a 15-min rest period, 15-min of exercise 1 (the condition of 4.5 mile/hr walking speed equivalent to with 8.5 Kcal energy consumption on the treadmill) period, 15-min rest period, exercise 2 (after 3minutes warming-up at 3.0. 3.7, 4.5. 5.2. 6.0, 6.7 mile/hr) until exhaustion period, and final 15-min of recovery period were performed. The results were as follows: The lowest mean skin temperature was acrylic/cotton in order of wool > cotton/wool > cotton > acrylic/cotton (F=13. 79. p<0.00l). Most of all skin temperature by parts of body had turned out in sequence of temperature wool > cotton/wool > acrylic/cotton > cotton. Fore arm part showed highest temperature about $32.43^{\circ}C$ on wool and had a tendency approximately $1.8^{\circ}C$ higher than cotton which had the lowest temperature, and had the biggest difference among garments in terms of skin temperature. The back temperature within clothing showed about $2^{\circ}C$ higher than the chest temperature within clothing. but the back humidity within clothing showed about 4~12% higher than the chest humidity within clothing. Body weight loss by each garment was this sequence; cotton > acrylic/cotton > wool > cotton/wool.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.234-243
• /
• 1997

The crystal structure of arc melted $ZrV_{x}Mn_{1-x}Ni_{1.0},\;ZrV_{x}Mn_{0.8-x}Ni_{1.2},\;ZrV_{x}Mn_{0.6-x}Ni_{1.4}$ alloys which are known to have AB2 type Laves structure was investigated. They had mixed phases of C14 and C15. The radius ratio ($r_{A}/r_{B}$) of atoms in A site to that of B site was found to be an important parameter in explaining the omposition dependence of the crystal structure The C15 structure showed a linear increase with the ratio in as-cast conditions. However, the annealed alloys revealed a definite ratio at which the stability of both phases are divided distinctly. The composition of the alloys could be closely controlled by maintaining the argon pressure in the chamber over 1 arm during arc melting. In contrast, the alloy ingot melted in VIM showed a significant loss of hln.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.132-137
• /
• 2004

On-Board Diagnostic(OBD) systems are in most cars and light trucks on the load today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. The CARB's diagnostic requirements to meet EPA emission standards have been designated as OBD with a goal of monitoring all of the emissions-related components, as well as the chassis, body, accessory devices and the diagnostic control network of the vehicle for proper operation. In this paper, we present a remote measurement system for the wireless monitoring of diagnosis signal and sensors output signals of ECU adopted KWP2000, united the OBD communication protocol, on OBD-compliant vehicle using the wirless communication technique of Bluetooth. In order to measure the ECU signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3C3410X is used for communicating ECU signals. The embedded system's software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on MicroC/OS kernel to communicate between bluetooth modules using bluetooth stack. The diagnostic system is developed using Visual C++ MFC and protocol stack of bluetooth for Windows environment. The self-diagnosis and sensor output signals of ECU is able to monitor using PC with bluetooth board connected in serial port of PC. The algorithms for measuring the ECU sensor output and self-diagnostic signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of self-diagnosis and sensor signals of ECU adopted KWP2000 in embedded system verified through the developed systems and algorithms.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1781-1786
• /
• 2007

Two copper(II) complexes, [CuL3](ClO4)2 bearing one N-CH2CH2CONH2 group as well as one N-CH2CH2CN group and [CuL4](ClO4)2 bearing two N-CH2CH2CONH2 groups, have been prepared by the selective hydrolysis of [CuL2](ClO4)2 (L2 = C-meso-1,8-bis(cyanoethyl)-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane). The complex [CuL5](ClO4)2 bearing one N-CH2CH2C(=NH)OCH3 and one N-CH2CH2CN groups has been prepared as the major product from the reaction of [CuL2](ClO4)2 with methanol in the presence of triethylamine. In acidic aqueous solution, the N-CH2CH2C(=NH)OCH3 group of [CuL5](ClO4)2 undergoes hydrolysis to yield [CuL6](ClO4)2 bearing both N-CH2CH2COOCH3 and N-CH2CH2CN groups. The crystal structure of [CuL5](ClO4)2 shows that the complex has a slightly distorted square-pyramidal coordination polyhedron with an apical Cu-N (N-CH2CH2C(=NH)OCH3 group) bond. The apical Cu-N bond distance (2.269(3) A) is ca. 0.06 A longer than the apical Cu-O (N-CH2CH2CONH2 group) bond of [CuL4](ClO4)2. The pendant amide group of [CuL3](ClO4)2 is involved in coordination. The carboxylic ester group of [CuL6](ClO4)2 is also coordinated to the metal ion in various solvents but is removed from the coordination sphere in the solid state.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.363-367
• /
• 2003

Much attention has been given to an electrochemical reduction process for converting uranium oxide to uranium metal in molten salt. The process has the versatility of being adopted for reducing other actinide and rare-earth metals from their oxides. Using the metal oxide to be reduced as a integrated cathode designed originally and inert conductors as anodes, oxygen anions are removed from the cathode and oxidized at the surface of the anodes in a molten salt cell. However, the electrochemical properties of alkali and alkali-earth metal oxides in molten salt have not been investigated thoroughly, which made the process incomplete when it is considered as a unit process in a back-end fuel cycle. It is well known that cesium and strontium Isotopes in spent fuel are main contributors for head load. The properties of cesium, strontium, and barium oxides such as the dissolution rates and reduction potentials in molten LiC1 dissolving $Li_2O$ are examined.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.176-181
• /
• 1980

Yeast invertase was immobilized on the 2 kinds of matrices : one is an indirectly coupled enzyme to the cyanogen bromide activated Sepharose by using ${\omega}-aminohexyl$ group as an extension arm, and the other is a tightly adsorbed enzyme on the modified hydrophobic cellulose derivative which has a phenoxyacetyl group as a linkage. The enzyme preparation coupled on Sepharose retained 26.0% of the original activity against sucrose as a substrate, while the preparation immobilized on phenoxyacetyl cellulose retained 72.9% . The immobilized invertase preparation on ${\omega}-aminohexyl$ Sepharose showed the optimal pH 4.5, optimal temperature $60^{\circ}C$, activation energy $5,941\;cal/mole{\cdot}deg$ and Km' 22.2 mM against sucrose, while the preparation adsorbed on phenoxyacetyl cellulose showed the optimal pH 4.0, optimal temperature $60^{\circ}C$, activation energy $7,769\;cal/mole{\cdot}deg$ and Km' 69.9 mM.

• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.443-448
• /
• 1998

The thermodynamic parameters for the interaction of metal ions with dibenzo-16-crown-5 and its derivatives have been determined by solution calorimetry in methanol at 25$^{\circ}C$. Thermodynamic properties of log K, ${\Delta}H$, and $T{\Delta}S$ have been determined for the complexation of metal cations by dibenzo-16-crown-5 and its derivatives. Dibenzo-16-crown-5 and its derivatives have been studied as metal cations carrier in bulk liquid membrane (BLM) and supported liquid membrane (SLM) system. $Ag^+$ has been much more transported using dibenzo-16-crown-5 derivatives as carriers and several other metal cations have been small transported using carrier in BLM and SLM system. Ligand structure, the length of side arm, donor atom, stability constant, and carrier concentration are also important parameters in the transport of cations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3227-3235
• /
• 2011

In this paper, a relational embedded DBMS was designed and a prototype 'Miracle' RDBMS (MDB) was developed. MDB is written in C and works on Unix, Linux and Windows platforms locally. It accesses database through SQL interfaces and API functions and uses $B^+$ tree index. It guarantees ACID in transactions and supports low concurrency control and processes SQL statements on a single table. To evaluate the performance of MDB on an ARM board EZ-S3C6410 and to compare the performance of MDB with that of SQLite, an experiment was carried out to estimate processing times for insertion, selection, update and deletion operations. The result shows that the average times for selections and insertions in MDB were 38.46% and 22.86% faster than those in SQLite, respectively, but the average times for updates and deletions in SQLite were 28.33% and 26.00% faster than MDB, respectively, This experiment shows that fetching data from database and sending data to database in MDB is faster than in SQLite, but $B^+$ tree index is implemented more effectively in SQlite than in MDB.