• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.7-11
• /
• 2000

The effects of fermentation temperature$(0{\sim}l5^{\circ}C)$ and salt concentration$(1.5{\sim}4.0%)$ on the fermentation property of Chinese cabbage Kimchi were analyzed by response surface methodology. The pH decreased and acidity increased with increasing fermentation time. The reduction and increment velocities of pH and acidity were increased by increasing fermentation temperature and decreasing salt concentration. The optimum pH 4.2 was reached within $14{\sim}24$ days at $5{\sim}15^{\circ}C$, while pHs of 24 days at $0{\sim}5^{\circ}C$ were still lower value than 4.2. The effect of salt concentration more affected terminal fermentation period than initial fermentation period. The maximum edible acidity, 0.75%, was reached within 8 days at $15^{\circ}C$, while acidifies of 24 days at $0^{\circ}C$ were $0.35{\sim}0.43%$. The effects of salt concentration at $0^{\circ}C$ was higher than those at $15^{\circ}C$. The fermentation time, fermentation temperature and salt concentration were the first, second and third affecting factors on the pH and acidity of Kimchi. Based on the coefficients of determination, pH and acidity were highly fitted to the experimental data$(r^2>0.9276)$. For the suitable acidity range, $0.40{\sim}0.75%$, the edible period of Kimchi at $15^{\circ}C,\;10^{\circ}C\;and\;5^{\circ}C$ were 4 days, 10 days and 18 days at the 2.75% of salt concentration, respectively. The edible period increased from 14 days to 19 days with increased salt concentration from 1.50% to 4.00% at $5^{\circ}C$ of fermentation temperature.

• Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.41-47
• /
• 2009

Column experiments were performed in this study to investigate humic acid adhesion to iron oxide-coated sand (ICS) under different experimental conditions including influent humic acid concentration, flow rate, solution pH, and ionic strength/composition. Breakthrough curves of humic acid were obtained by monitoring effluents, and then column capacity for humic acid adsorption ($C_cap$), total adsorption percent (R), and mass of humic acid adsorbed per unit mass of filter media ($q_a$) were quantified from these curves. Results showed that humic acid adhesion was about seven times higher in ICS than in quartz sand at given experimental conditions. This indicates that humic acid removal can be enhanced through the surface charge modification of quartz sand with iron oxide coating. The adhesion of humic acid in ICS was influenced by influent humic acid concentration. $C_cap$ and $q_a$ increased while R decreased with increasing influent humic acid concentration in ICS column. However, the influence of flow rate was not eminent in our experimental conditions. The humic acid adhesion was enhanced with increasing salt concentration of solution. $C_cap$, $q_a$ and R increased in ICS column with increasing salt concentration. On the adhesion of humic acid, the impact of CaCl2 was greater than that of NaCl. Also, the humic acid adhesion to ICS decreased with increasing solution pH. $C_cap$, $q_a$ and R decreased with increasing solution pH. This study demonstrates that humic acid concentration, salt concentration/composition, and solution pH should be controlled carefully in order to improve the ICS column performance for humic acid removal from water.

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.30-36
• /
• 2002

A bioconcentration experiment was performed for killifish using nonradioactive and radioactive butachlor. At 0.036 ppm concentration, the highest bioconcentration ratio $(C_f/C_w)$ and BCF at steady state recorded as 296 and 87 respectively. And at 0.0036 ppm concentration, the highest $C_f/C_w$ ratio was 169 and the BCF was 51 at steady state. Considering the experimental variation of the BCF's, the BCF of butachlor was tentatively determined to be $69{\pm}28$. And the $^{14}C-butachlor$ and its metabolites depurated about 50% within 12 hours and 90% within 30 hours after depuration experiment started. And in vivo metabolites, designated as M-I, M-II, and M-III, were found in killifish and the excretes as butachlor was metabolised.

• Archives of Pharmacal Research
• /
• v.14 no.4
• /
• pp.290-294
• /
• 1991

For the determination of peripheral COMT activity, we synthesized $[2-^{14}C]-3',4'-dihydroxyacetophenone([^{14}C]-DHAP)$, a model substrate closely related to catecholamines, which cannot be attacked by monoamine oxidase. After i.v.-injection of $[^{14}C]-DHAP$ in living animals, only 3',4'-dihydroxy-acetophenone (3',4'-DHAP) and 3'-methoxy-4'-hydroxyacetophenone (3'-MHAP) were detected in blood by thin layer radio chromatography. It could be speculated that 3',4'-DHAP was primarily O-methylated by COMT, followed by subsequent conjugations. The concentration of 3',4'-DHAP, a substrate for COMT, in blood at 5 min after injection of $[^{14}C]-DHAP$, were similar in all animals. The rate of 3'-MHAP formation can be therefore used as an indicator for peripheral COMT activity. The velocity of methylation in 15 min after i.v.-administration of $[^{14}C]-DHAP$ was $0.28\;{\mu}g/ml{\cdot}min$. From these results, 3',4'-DHAP was shown to be used as an appropriate substrate to determine the COMT activity in vivo.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.47-53
• /
• 2018

In this study, high-purity silver nanocolloids were synthesized by an electrolytic reaction, and the effect of temperature on the nanocolloid concentration was analyzed by performing the reaction at $70^{\circ}C$ and $90^{\circ}C$. The antibacterial properties of the thus-synthesized silver nanocolloids were also studied. When the synthesis was performed at $90^{\circ}C$, the concentration of silver nanocolloid increased to 14 mg/L after 5 min, 1756 mg/L after 30 min, and 2147 mg/L after 60 min. The concentration of silver nanocolloid synthesized by electrolytic reaction at $70^{\circ}C$ and $90^{\circ}C$ for 60 min was 1,882 mg/L and 2147 mg/L, respectively. The preferred temperature at which the electrolytic synthesis is performed is $70^{\circ}C$ to obtain high concentrations of 1,000 mg/L or more. The antibacterial performance of the thus-synthesized silver nanocolloids was 99.9% for E. coli and 99.5% for Pseudomonas aeruginosa.

• Solar Energy
• /
• v.18 no.3
• /
• pp.9-14
• /
• 1998

The present solar energy concentrator is a 2-dimensional system that incorporates with a tubular absorber. A new design theory is developed on the basis of the generalized edge-ray principle. The result shows the increase of concentration ratio for the same acceptance angle as the basic CPC by a factor of $C_{new}=C_{cpc}\{1+(d/{\pi}r)\;sin^2{\theta}_c\}$. For example, if ${\theta}_c=30^{\circ}$, the new design offers the concentration of $2.0{\sim}2.72$, whereas $C_{cpc}=2$. The new system also provide a thin and light-weight design.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.922-927
• /
• 2001

Single-layer green ELs was fabricated with using molecularly-dispersed Bu-PBD into poly-N-vinylcarbazole(PVK) which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PVK:Bu-PBD:C6(∼ 100nm)/Ca(20nm)/Al(20nm) was employed with variable doping concentration. The keys to obtain high quantum efficiency was excellent film forming capability of molecularly dispersed into PVK and appropriate combination of cathode for avoiding exciplex. We obtained the turn-on voltage of 4.2V and quantum efficiency of 0.52% at 0.lmol% of C6 concentration which has been improved about a factor of 50 in comparison with the undoped cell. The PL peak wavelengths wouldn\`t be turned by changing the concentration of the C6 dopant. Green EL emission peak and FWHM were 520nm and 70nm respectively. PL emission peak was obtained at 495nm.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.244-249
• /
• 2009

Designing an ozone contactor is complicated because the residual ozone, log C. parvum inactivation, and bromate formation should be optimized with fluctuating water quality. OCM software was developed to assist a plant designer or an operator to fulfill the sophisticated optimization required in the design or operation of a new or an existing plant. In this article, numerical simulations were carried out using the OCM software for the design of a new ozone contactor under diverse design factors (i.e., three pHs, three temperatures, low and high dispersion numbers, and four and ten cells with complete mixing) with kinetic parameters obtained from the sand-filter effluent of a water treatment plant treating water from the Paldang impoundment. The results of the simulation suggested that a high residual ozone concentration at low pH and low temperature would be challenging, and PFR-like hydrodynamics could lower the residual ozone concentration. The inactivation of C. parvum oocysts increased at a lower pH. A lower dispersion number and more cell division increased the inactivation efficiency. Bromate was instantaneously formed during the initial ozonation stage. The effluent concentration was much lower than the regulatory levels imposed by the USEPA because of the low bromide level in raw water.

• Journal of Radiation Protection and Research
• /
• v.28 no.1
• /
• pp.51-57
• /
• 2003

To assess the internal dose by $^3H\;&\;^{14}C$ in total diet of inhabitants near Wolsung Nuclear Power Plants, TFWT, OBT and $^{14}C$ concentration in total diet was analyzed for collection region and time. TFWT, OBT and $^{14}C$ concentrations were in the range of 3.19-42.2 Bq/L, 1.00-39.4 Bq/L, and 0.230-0.855 Bq/gC, respectively. The calculated annual effective dose with TFWT, OBT and $^{14}C$ is $6.10{\times}10^{-5}mSv/y,\;3.71{\times}10^{-5}mSv/y\;and\;7.08{\times}10^{-3}mSv/y$, respectively. And then annual internal dose with total diet for inhabitants near Wolsung NPPs is about $7.18{\times}10^{-3}mSv/y$, which is about 0.72% of annual effective dose limit 1 mSv/y.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.1
• /
• pp.17-24
• /
• 1987

Benzene-ring-labelled $^{14}C-Bentazon$(3-isopropyl-2, 1, 3-benzothiadiazin-4-one-2, 2-dioxide) incubated aerobically in a German and a Korean soil at application rates of 5.51 and 25.05mg/Kg was mineralized to $^{14}CO_2$ at average rates of 0.6% and 0. 2%/week, respectively, in both soils, in the absence of plants. Distilled water was the most suitable solvent for the extraction of Bentazontreated soils. Extraction results disclosed that higher percentages of nonextractable residues were formed in the lower concentration of 5.51mg/Kg than in the higher concentration of 25.05mg/Kg, relative to the initial concentrations.