• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.213-218
• /
• 2001

ZnO and ZnO:In films were deposited on the glass substrates by a spray pyrolysis method. It is found that ZnO films were polycrystalline with the preferred orientation (002) and have a hexagonal structure with lattice constants of a=3.242 $\AA$ and c=5.237 $\AA$. The crystalline structure of ZnO:In films deposited at the In content of 0~6.03 at. % were the same as that of ZnO films, but its lattice constants was slightly larger than those of ZnO films. The relative atomic ratios of metal ion of ZnO:In films were in accordance with those of the spray solution within the experimental error. The minimum resistivity of and the maximum carrier concentration of 19.1 $\Omega\cdot\textrm{cm}$ and the maximum carrier concentration of $2.11\times10^{19}\textrm{cm}^{-3]$ obtained from the ZnO:In films when In content was 2.76 at. %. The optical transmission of the sample grown at the In content of 3.93 at. % was about 95% in the wavelength between 400 and 800 nm.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.179-188
• /
• 2006

The purpose of this study is to quantitatively estimate the settling and erosional properties for cohesive sediments in Shihwa lake. Settling tests are conducted by multi-depth method using a specially designed 1.8 m tall settling column, and erosion tests are conducted with annular flume under the uniform bed condition. As result of settling tests, it is confirmed that the settling velocity of the cohesive sediments has the range of $0.002 for suspended sediments concentration of 0.1$0.19{\sim}0.55N/m^{2}$ for bed shear stress of $1.14{\sim}1.32g/cm^{3}$, and the erosion rate coefficient decreases with logarithmic function in a range of $18.4{\sim}3.9mg/cm^{2}{\cdot}hr$ with increase of bed shear stress.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.85-98
• /
• 2004

The situation of technology Predominance and the distribution of core technology were visually mapped thorough the investigation of technical trend during 20 years, which was provided with the analysis of patent information for the artificial skin. Therefore, it was expected that technology mapping by means of multilateral analysis method allowed a good grasp of current technology trend of the artificial skin and the subdivision into nation and a field of research presents the direction of R&D. In the early R&D stage of artificial skin, the preparation technology of filters implantable into the living body including nursing devices, bandages, and dressings or absorbent pads (A6IF-002/10) was on the rise in research field of artificial skin until 1980's. And then the materials technology for coating prostheses (A6l L-027/00)was leading the core technology of artificial skin. Also, Nowadays the fusion technology connected the material technology with the cultivation technology of undifferentiated human or animal cells/tissues including culture media (C l2N-005/00, C 12N-005/06) was highlighted all over the world.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.517-523
• /
• 2019

The aim of the study was to examine the effects of the five-sensory horticulture therapy on perceived stress and HRV in adults with depression. The participants were 26 (experimental group=13, control group=13) adult with depression and enrolled in the Regional C mental health welfare center from April to June 2018. The experimental group participated in a total of 8-session five sensory horticultural therapy once a week, and the control group provided horticultural therapy once to the desired subjects after the program. The data were analyzed using descriptive statistics, t-test, and Mann-Whitney U test. There were statistically significant change in perceived stress (t = 3.11, p = .005), LF (t = -3.39, p = .002) and SDNN (t = -2.48, p = .025) in experimental group compared to the control group. Therefore, this therapy was effective for reduction of stress among individuals with the depressive disorder.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.351-354
• /
• 2017

An experimental design method was used to optimize the synthesis of gamma-alumina with a superior thermal stability using the reverse micelle method. First, twelve experimental conditions were derived by using the mixture design method to optimize conditions for the ratio of surfactant, water and oil, which are main factors in the synthesis process. When the particles synthesized by reverse micelle method were calcined at $900^{\circ}C$ under the designed condition, they all had gamma-alumina crystal structure although there were differences in particle sizes. The coefficient of determination of the second-order regression model using the derived experimental results was 93.68% and the P-value was 0.002. The synthesis conditions forgamma-alumina with various particle sizes were presented using surface and contour lines. As a result, it was calculated that the smallest particle size of about 2.8 nm was synthesized when the ratio of surfactant/water/oil was 0.3450/0.0729/0.5821.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.294-301
• /
• 1987

This experiment was carried out to investigate the occurrence of tiller and its proportion to grain yield under 5 different plant densities. Plant density 5 x 5cm was more favorable for increasing the number of spikes per unit area, where leads to improve grain yield. Effective tillers showed only main stem, M$_1$-axil and M$_2$-axil, indication more effective tillers in M$_1$ rather than main stem. Every tillers held at least 6 leaves to bear spikes, indicating that main stem has 12 -13 leaves. Leaves attached on main stem M$\sub$0/ and M$_1$ were very important as main source of photosynthesis, especially under more compart plant densities while leaves of M$_1$ occupied 66.8% in a plant. The proportion of grain yield of each tiller to total grain yield per plant was high in main stem under conpact plant density, in M$_1$ stems under less compact plant density, and in M$_2$ -stems under wide plant density, indicating same result on multiple regression analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.990-994
• /
• 2005

MBE growth conditions such as growth temperature, flux ration and growth rate for II-VI compound semiconductor growth has been studied. The growth temperature, flux ration and growth rate were tentatively controlled to 290$^{\circ}C$, 2, and 0.6 ${\mu}m$/h, respectively. From AFM result, relatively rough surface (RMS ${\sim}$ 2.9 nm) was observed. It was regarded as an indication of low growth temperature and high growth rate. XRD measurement shows that the film is relaxed, also the series of XRD measurements of different diffraction planes such as (002), (004), (115), (006) diffractions were performed to calculate the dislocation density in the film. The calculated dislocation density was found to be 8.30${\times}10^8$ dis/cm$^2$ which is compatible to the previous results.

• Journal of Oral Medicine and Pain
• /
• v.24 no.3
• /
• pp.335-345
• /
• 1999

법의학적 개인식별 및 친생자 감정시 여러 개의 single tandem repeats(STR) 유전좌위 검색이 필요하다. 그 이유는 STR 유전좌위는 대립유전자 수가 적고 이형접합도가 낮아 서로 다른 개체간에도 동일한 유전좌위를 가질 확률이 높기 때문에 개인식별에 대한 기여도가 떨어지게 된다. 따라서 여러 개의 다양한 STR 유전좌위들을 동시에 분석함으로써 우연적으로 개체간에 유전자형이 일치할 가능성을 낮추어야 감정의 신뢰성을 높일 수 있으며 이에는 각 STR 유전좌위에 대한 유전좌위의 분포가 인종별, 지역별로 달라 이에 대한 유전자분포를 구하는 것이 선행조건이다. 이에 본 연구에서는 법의학적 개인식별 및 친자감정시 기초자료로 활용하기 위하여 서로 혈연관계가 없는 201명의 한국인 혈액에서 DNA를 추출하여 STR 유전좌위증 human coagulation factor XIII A subunit gene(F13A0l Locus), human c-fes/fps proto-oncogene(FESFPS Locus), human von Willebrand factor gene (vWA Locus)등 FFv Triplex 유전자를 중합효소반응에 의하여 동시에 증폭하고, 폴리아크릴아마이드겔을 이용한 전기영동 및 질산은 염색을 시행한 후 FFv Triplex유전자의 유전자형 및 대립유전자 빈도 등을 분석하여 다음과 같은 결과를 얻었다. (1) F13A01유전자는 5개의 대립유전자, 12개의 유전자형을 검출하였으며, 이형접합도는 60.7%로 나타났고 대립유전자 및 유전자빈도는 3.2, 4, 5, 6, 16 대립유전자에서 각각 0.34 3, 0.114, 0.062, 0.475, 0.005로 나타났으며, 대립유전자 7, 8, 9, 10, 11, 12, 13, 14, 15는 검출되지 않았다. (2) F13A01 대립유전자다양성 (allelic diversity value)은 0.641, 개인식별력(PD)은 0.814를 보였으며 대립유전자다양성 및 이형접합도가 다른 민족과 비교할 때 다소 낮았다. (3) FESFPS유전자는 8개 대립유전자 모두 나타났으며, 15개의 유전자형을 검출하였으며, 이형접합도는 66.7%로 나타났고 대립유전자 및 유전자빈도는 7, 8, 9, 10, 11, 11, 12, 13, 14 대립유전자에서 각각 0.002, 0.002, 0.005, 0.032, 0.507, 0.264, 0.197, 0.007로 나나났다. (4) FESFPS 대립유전자다양성(allelic diversity value)은 0.641, 개인식별력(PD)은 0.804를 보였다. (5) vWA유전자는 9개의 대립유전자, 23개의 유전자형을 검출하였으며, 이형접합도는 80.1%로 나타났고 대립유전자 및 유전자 빈도는 11, 12, 14, 15, 16, 17, 18, 19, 20 대립유전자 에서 각각 0.002, 0.002, 0.219, 0.032, 0.187, 0.279, 0.189, 0.072, 0.017로 나타났으며, 대립 유전자 13, 21는 검출되지 않았다. (6) vWA 대립유전자다양성(allelic diversity value)은 0.799, 개인식별력(PD)은 0.924로 매우 높게 나타냈다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.615-623
• /
• 2016

This study was conducted to identify differences between qualities of health related to quality of life according to the general characteristics of ankylosing spondylitis patients. Overall, 275 patients who were older than 19 years, drug-maintained for over 4 weeks from Jan 13th to Feb 12th and diagnosed as ankylosing spondylitis at C university hospital participated in this study. Collected data were analyzed through descriptive statistics, t-tests, ANOVA, Scheffe's-test and multiple regression. The results of the present study revealed that Age (p=.008), Job (p<0.001), Number of comorbidity (p<0.001), Surgery for Ankylosing Spondylitis (p=0.002), Disease duration after onset symptom (p=0.010), Disease duration after diagnosis (p=0.027), Alcohol drinking (p=0.002) and Erythrocyte sedimentation rate (p=0.049) were meaningful factors to the quality of health-related life for ankylosing spondylitis patients, and multiple regression analysis showed that level of education, income, comorbidity and alcohol consumption was a significant variable. In conclusion, the results of this study indicated that, to improve quality of life, arbitration programs for improving general characteristics and considering demographic social characteristics and clinical features need to be provided. Therefore, it is expected that the results of this study would be used as actual grounds to develop integrated arbitration programs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.164-167
• /
• 2010

Bulk GaN single crystal with 1.5 mm thickness was successfully grown by hydride vapor phase epitaxy (HVPE) technique. Free-standing GaN substrates of $10{\times}10,\;15{\times}15$ mm size were fabricate after lift-off of sapphire substrate and their optical properties were characterized properties for device applications. X-ray diffraction patterns showed (002) and (004) peak, and the FWHM of the X-ray rocking curve (XRC) measurement in (002) was 98 arcsec. A sharp photoluminescence spectrum at 363 nm was observed and defect spectrum at visible range was not detected. The hexagonal-shaped etch-pits are formed on the GaN surface in $200^{\circ}C\;H_3PO_4$ at 5 minutes. The defect density calculated from observed etch-pits on surface was around $5{\times}10^6/cm^2$. This indicates that the fabricated GaN substrates can be used for applications in the field of optodevice, and high power electronics.